GB/T 18813-2014 PDF English
US$150.00 · In stock · Download in 9 secondsGB/T 18813-2014: Transformer copper strip Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 18813: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 18813-2014 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Transformer copper strip
| Valid |
| GB/T 18813-2002 | English | 319 |
Add to Cart
|
3 days
|
Transformer copper strip
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 18813-2014
GB/T 18813-2014: Transformer copper strip---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT18813-2014
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.150.30
H 62
Replacing GB/T 18813-2002
Copper Strip for Transformer
ISSUED ON: DECEMBER 5, 2014
IMPLEMENTED ON: MAY 1, 2015
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Requirements ... 5
4 Test Methods ... 8
5 Inspection Rules ... 9
6 Marking, Packaging, Transportation, Storage and Quality Certificate ... 11
7 Content of Order Sheet (or contract) ... 11
Foreword
This Standard was drafted in accordance with the rules provided in GB/T 1.1-2009.
This Standard serves as a replacement of GB/T 18813-2002 Transformer Copper Strip. In
comparison with GB/T 18813-2002, the main changes are as follows:
---The code representation for alloys is added;
---Strip with a thickness > 2.5 mm ~ 3.0 mm and a width 610 mm is added;
---The width range of the strip is modified: for strip with a thickness 0.1 mm ~ < 0.5 mm,
the width is modified from 600 mm into 610 mm; for strip with a thickness 0.5 mm ~
2.5 mm, the width is modified from 1,000 mm into 1,050 mm;
---The allowable deviation of the thickness of the strip becomes more rigorous;
---The stipulation of burrs on the cutting-edge of the strip becomes more rigorous;
---The stipulation that “chemical composition analysis shall be conducted in accordance
with the stipulations of YS/T 482” is added;
---The stipulation that “the inspection of overall dimensions of the strip shall be conducted
in accordance with the stipulations of GB/T 26303.3” is added;
---The stipulation that “specimen preparation shall be conducted in accordance with the
stipulations of YS/T 815” is added;
---The stipulation that “sampling method shall comply with the stipulations of YS/T 668”
is added.
This Standard shall be under the jurisdiction of National Technical Committee 243 on
Nonferrous Metals of Standardization Administration of China (SAC/TC 243).
The drafting organizations of this Standard: CHINALCO Luoyang Copper Processing Co., Ltd.;
CHINALCO Shanghai Copper Processing Co., Ltd.; Ningbo Xingye Shengtai Group Co., Ltd.;
Baiyin Nonferrous Group Co., Ltd.; China Nonferrous Metals Techno-Economic Research
Institute.
The main drafters of this Standard: Zhu Yingli, Guo Huiwen, Wei Wei, Shao Shengzhong, Yang
Qunyang, Li Jian, Li Shuanglong, Chen Weiwen, Shen Libang, Chen Hui.
The issuing of the previous version:
---GB/T 18813-2002.
Copper Strip for Transformer
1 Scope
This Standard specifies the requirements, test methods, inspection rules, marking, packaging,
transportation, storage, quality certificate and order sheet (or contract) of copper strip for
transformer.
This Standard is applicable to copper strip for winding transformer coil.
2 Normative References
The following documents are indispensable to the application of this Document. In terms of
references with a specified date, only versions with a specified date are applicable to this
Document. In terms of references without a specified date, the latest version (including all the
modifications) is applicable to this Document.
GB/T 228.1-2010 Metallic Materials - Tensile Testing - Part 1: Method of Test at Room
Temperature
GB/T 351 Metallic Materials - Resistivity Measurement Method
GB/T 4340.1 Metallic Materials - Vickers Hardness Test - Part 1: Test Method
GB/T 5121 (all parts) Methods for Chemical Analysis of Copper and Copper Alloys
GB/T 5231 Designation and Chemical Composition of Wrought Copper and Copper Alloys
GB/T 8888 Wrought Heavy Non-ferrous Metal Products - Packing, Marking, Transportation,
Storing and Certificate of Quality
GB/T 26303.3 Measuring Methods for Dimensions and Shapes of Wrought Copper and Copper
Alloys - Part 3: Sheets and Strips
YS/T 478 Method for Electrical Conductivity Measurement of Copper and Copper Alloys by
Use of Eddy Current
YS/T 482 Method for Analysis of Copper and Copper Alloys - The Atomic Emission
Spectrometry
YS/T 668 Sampling Method of Physical and Chemical Testing for Copper and Copper Alloys
YS/T 815 Preparation Method of Test Pieces for Mechanical and Technological Properties of
Copper and Copper Alloys
stipulations of GB/T 5121 (all parts).
4.2 Overall Dimensions and Allowable Deviations
The measurement of the overall dimensions of the strip shall be conducted in accordance with
the stipulations of GB/T 26303.3.
4.3 Mechanical Properties
The tensile test of the strip shall be conducted in accordance with the stipulations of GB/T
228.1-2010. The specimen No. is P02 in Appendix B of GB/T 228.1-2010. The Vickers
hardness test shall comply with the stipulations of GB/T 4340.1.
4.4 Electrical Properties
The test of the electrical properties of the strip shall be conducted in accordance with the
stipulations of GB/T 351 or YS/T 478. The arbitration test shall comply with the stipulations of
GB/T 351.
4.5 Surface Quality
The surface quality of the strip shall be subject to visual inspection.
5 Inspection Rules
5.1 Inspection and Acceptance Inspection
5.1.1 The strip shall be inspected by the technical supervision department of the supply-side to
ensure that the product quality complies with the stipulations of this Standard and the order
sheet (or contract). In addition, a quality certificate shall be filled out.
5.1.2 The demand-side shall inspect the received products in accordance with the stipulations
of this Standard and the order sheet (or contract). If the inspection results are inconsistent with
the stipulations of this Standard and the order sheet (or contract), it shall be submitted to the
supply-side in the written form, and be resolved by the demand-side and the supply-side through
negotiation. Objections belonging to surface quality and dimensional deviations shall be
proposed within 1 month from the date of receipt of the product; other quality objections shall
be proposed within 3 months from the date of receipt of the product. If arbitration is required,
the arbitration sampling shall be jointly conducted by the demand-side and the supply-side at
the demand-side’s place.
5.2 Batch
The strips shall be submitted for acceptance inspection in batches. Each batch shall be
composed of strips of the same designation, status and specification. The weight of each batch
shall be not greater than 6,500 kg (if it is the same melting time, the batch size may not be
limited).
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 18813-2014 be delivered?Answer: The full copy PDF of English version of GB/T 18813-2014 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 18813-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18813-2014_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 18813-2014 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 18813-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18813-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 18813-2014?A step-by-step guide to download PDF of GB/T 18813-2014_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 18813-2014".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|