Search result: GB/T 17909.1-2023 (GB/T 17909.1-1999 Older version)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 17909.1-2023 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Cranes - Operating manual - Part 1: General
| Valid |
GB/T 17909.1-2023
|
| GB/T 17909.1-1999 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Cranes. Crane driving manual. Part 1: General
| Obsolete |
GB/T 17909.1-1999
|
| Standard ID | GB/T 17909.1-2023 (GB/T17909.1-2023) | | Description (Translated English) | Cranes - Operating manual - Part 1: General | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J80 | | Classification of International Standard | 53.020.20 | | Word Count Estimation | 10,178 | | Date of Issue | 2023-09-07 | | Date of Implementation | 2024-04-01 | | Older Standard (superseded by this standard) | GB/T 17909.1-1999 | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Administration |
GB/T 17909.1-2023. Crane Operation Manual Part 1. General Principles
ICS 53.020.20
CCSJ80
National Standards of People's Republic of China
Replace GB/T 17909.1-1999
Crane Operation Manual
Part 1.General principles
Published on 2023-09-07
2024-04-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
Prefaceā
Introduction III
1 range 1
2 Normative reference documents 1
3 Terms and Definitions 1
4 Expression method of operation manual 2
5 Contents of the operating manual 2
Preface
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
This document is Part 1 of GB/T 17909 "Crane Operation Manual". GB/T 17909 has published the following parts.
---Part 1.General principles;
---Part 2.Mobile cranes;
---Part 4.Jib crane.
This document replaces GB/T 17909.1-1999 "Crane Crane Operation Manual Part 1.General Provisions" and is consistent with
Compared with GB/T 17909.1-1999, in addition to structural adjustments and editorial changes, the main technical changes are as follows.
a) Changed the scope (see Chapter 1, Chapter 1 of the.1999 edition);
b) Changed the terms and definitions of driver to operator (see 3.1, 3.1 of the.1999 edition);
c) Added terms and definitions for the operation manual and controller (see 3.2~3.3);
d) Added the suggestion to provide an electronic version of the operation manual (see 4.1);
e) Relevant content of technical data has been changed (see 5.1, 5.1 of the.1999 version);
f) It is added that safety signs should comply with the requirements of corresponding standards (see 5.2.1, 5.2 of the.1999 edition).
This document has been modified to adopt ISO 9928-1.2015 "Crane and Crane Operation Manual Part 1.General Principles".
Compared with ISO 9928-1.2015, this document has made the following structural adjustments.
a) increased by 3.2~3.3;
b) 5.2.1 corresponds to the content of 5.2 in ISO 9928-1.2015, and 5.2.2~5.2.6 corresponds to 5.2.1~ of ISO 9928-1.2015
5.2.5.
The technical differences between this document and ISO 9928-1.2015 and their reasons are as follows.
a) Added the scope of application (see Chapter 1) and clarified the scope of application of this document;
b) Replaced with normatively cited GB/T 3101, GB/T 3102.3, GB/T 6974.1~GB/T 6974.5 respectively
ISO 80000-1, ISO 80000-4 and ISO 4301 (all parts) (see Chapter 2), in order to adapt to my country's national conditions and increase the standard
Operability;
c) The terminology of the operation manual and controller (see 3.2~3.3) has been added and clearly defined to improve the practicality of this document and eliminate ambiguity;
d) Added the suggestion to provide an electronic version of the operation manual [see 4.1c)] to comply with technological development trends;
e) Added disclaimer information [see 4.2h)] to avoid disagreements caused by improper operation and other reasons;
f) Relevant requirements for technical data have been changed, including changing "the manual should include" to "the manual should include but not limited to" and adding the provision of
Requirements such as crane electrical schematic diagram, hydraulic system schematic diagram, controller panel layout diagram and main technical parameters of the crane (see
5.1), these data are an important part of the random delivery data, and are also an important basis for the installation, disassembly and operation of the crane;
g) Added that safety signs should comply with the requirements of GB/T 15052 (see 5.2.1) to clarify the requirements;
h) The relevant content of typical examples of safety warnings has been changed (see 5.2.2~5.2.6) to help the safe operation of the crane;
i) Added specific requirements for load diagrams and load tables (see 5.5) to improve the operability of this document.
This document has made the following editorial changes. For simplicity and coordination with the existing standard system, the repeated "lifting" has been deleted from the name of this document.
The word "machine".
Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents.
This document is proposed by China Machinery Industry Federation.
This document is under the jurisdiction of the National Lifting Machinery Standardization Technical Committee (SAC/TC227).
This document was drafted by. Frantech Heavy Industry Co., Ltd., Beijing Hoisting and Transportation Machinery Design and Research Institute Co., Ltd., Beijing Kezheng
Ping Engineering Technology Inspection Research Institute Co., Ltd., Hangzhou Huaxin Mechanical and Electrical Engineering Co., Ltd., Zhejiang Zhongjian Road and Bridge Equipment Co., Ltd., Henan Mining
Shan Crane Co., Ltd., Henan Weihua Heavy Machinery Co., Ltd., Anji Changhong Chain Manufacturing Co., Ltd., Weite Technology Co., Ltd., Jiangxi
Hoisting Machinery General Factory Co., Ltd., Changyuan Municipal Market Supervision and Administration Bureau, Shandong Fenghui Equipment Technology Co., Ltd., Zhejiang Construction Engineering Machinery Group
Group Co., Ltd., China Construction Fifth Engineering Bureau (Yantai) Construction Engineering Co., Ltd., Qinhuangdao Tianye Tonglian Heavy Industry Technology Co., Ltd., China Gezhouba Group
Three Gorges Construction Engineering Co., Ltd., Xi'an Special Equipment Inspection and Testing Institute, Chengdu Special Equipment Inspection and Testing Institute, Henan Dafang Heavy Duty
Machinery Co., Ltd., Henan Zhengda Hoisting Equipment Co., Ltd.
The main drafters of this document. Yuan Xiufeng, Lan Jiangsong, Shen Ce, Zhang Pei, Tao Fenghua, Tong Guozhu, Wang Xinjing, Fang Tao, Niu Pengchao, Wang Honghua,
Bao Zhihu, Jiang Jiwei, Zhu Yao, Wang Hongbo, Zhang Jianjiang, Zhou Lihong, Yu Jianjun, Sun Yuqiao, Cao Zhongsheng, Mu Shengyong, Liu Shu, Yang Wenhui, Cao Xiangyang,
Hu Jianhong.
This document was first published in.1999 and this is the first revision.
introduction
The crane operation manual is an important basis for guiding users to use the crane in a standardized and correct manner. In order to ensure that the operation manual is comprehensive
Reasonable, it is necessary to formulate this document. GB/T 17909 aims to unify and standardize the preparation of crane operating manuals and is planned to be composed of five parts.
constitute.
---Part 1.General principles. The purpose is to standardize the general requirements for crane operating manuals.
---Part 2.Mobile cranes. The purpose is to standardize the content of mobile crane operating manuals.
---Part 3.Tower cranes. The purpose is to standardize the content of tower crane operating manuals.
---Part 4.Jib crane. The purpose is to standardize the content of jib crane operating manuals.
---Part 5.Bridge and gantry cranes. The purpose is to standardize the content of operating manuals for bridge and gantry cranes.
Crane Operation Manual
Part 1.General principles
1 Scope
This document gives general requirements for the preparation of crane operating manuals.
This document applies to cranes defined in GB/T 6974.1.
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document.
GB/T 3101 General principles for quantities, units and symbols (GB/T 3101-1993, ISO 31-0.1992, EQV)
GB/T 3102.3 Mechanical quantities and units (GB/T 3102.3-1993, ISO 31-3.1992, EQV)
GB/T 6974.1 Crane terminology Part 1.General terminology (GB/T 6974.1-2008, ISO 4306-1.2007, IDT)
GB/T 6974.2 Crane terminology Part 2.Mobile cranes (GB/T 6974.2-2017, ISO 4306-2.
2012,IDT)
GB/T 6974.3 Crane terminology Part 3.Tower crane (GB/T 6974.3-2008, ISO 4306-3.2003,
IDT)
GB/T 6974.4 Crane terminology Part 4.Jib crane
GB/T 6974.5 Crane terminology Part 5.Bridge and gantry cranes (GB/T 6974.5-2008, ISO 4306-5.
2005,IDT)
GB/T 15052 General principles for crane safety signs and hazard graphic symbols (GB/T 15052-2010, ISO 13200.
1995,IDT)
3 Terms and definitions
The terms and definitions defined in GB/T 6974.1 and the following apply to this document.
3.1
operatorcraneoperator
A person who operates a crane for load positioning.
Note. Drivers are conventionally referred to only as operators who move a crane from one location to another.
3.2
operatingmanual
A document that describes and illustrates the crane structure, mechanism, performance parameters, operating requirements and safety measures.
3.3
Controllercontrol
The device through which the crane operator gives instructions to the crane.
Note. Usually refers to flashlight door, wireless remote control device and cab linkage station.
......
|