GB/T 17626.6-2017 PDF English
US$955.00 · In stock · Download in 9 secondsGB/T 17626.6-2017: Electromagnetic compatibility -- Testing and measurement techniques -- Immunity to conducted disturbances, induced by radio-frequency fields Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 17626.6: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 17626.6-2017 | English | 955 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Electromagnetic compatibility -- Testing and measurement techniques -- Immunity to conducted disturbances, induced by radio-frequency fields
| Valid |
| GB/T 17626.6-2008 | English | 370 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Electromagnetic compatibility -- Testing and measurement techniques -- Immunity to conducted disturbances, induced by radio-frequency fields
| Obsolete |
| GB/T 17626.6-1998 | English | 355 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Electromagnetic compatibility Testing and measurement techniques Immunity to conducted disturbances, induced by radio-frequency fields
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 17626.6-2017
GB/T 17626.6-2017: Electromagnetic compatibility -- Testing and measurement techniques -- Immunity to conducted disturbances, induced by radio-frequency fields
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT17626.6-2017
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 33.100.20
L 06
GB/T 17626.6-2017 / IEC 61000-4-6.2013
Replacing GB/T 17626.6-2008
Electromagnetic Compatibility – Testing and Measurement
Techniques – Immunity to Conducted Disturbances, Induced
by Radio-Frequency Fields
[IEC 61000-4-6.2013, Electromagnetic Compatibility (EMC) – Part 4-6.Testing and
Measurement Techniques – Immunity to Conducted Disturbances, Induced by Radio-
Frequency Fields, IDT]
Issued on: DECEMBER 29, 2017
Implemented on: JULY 01, 2018
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 4
1 Scope... 8
2 Normative References... 8
3 Terms and Definitions... 9
4 General... 10
5 Test Levels... 13
6 Test Equipment and Level Adjustment Procedures... 14
6.1 Test generator... 14
6.2 Coupling and decoupling devices... 15
6.3 Verification of the common mode impedance at the EUT port of coupling and
decoupling devices... 24
6.4 Setting of the test generator... 27
7 Test Setup and Injection Methods... 30
7.1 Test setup... 30
7.2 EUT comprising a single unit... 31
7.3 EUT comprising several units... 32
7.4 Rules for selecting injection methods and test points... 33
7.5 CDN injection application... 35
7.6 Clamp injection application when the common mode impedance requirements can be
met... 37
7.7 Clamp injection application when the common mode impedance requirements cannot
be met... 38
7.8 Direct injection application... 39
8 Test Procedure... 39
9 Evaluation of the Test Results... 40
10 Test Report... 41
Annex A (Normative) EM and Decoupling Clamps... 43
Annex B (Informative) Selection Criteria for the Frequency Range of Application.. 53
Annex C (Informative) Guide for Selecting Test Levels... 56
Annex D (Informative) Information on Coupling and Decoupling Networks... 57
Annex E (Informative) Information for the Test Generator Specification... 63
Annex F (Informative) Test Setup for Large EUTs... 64
Annex G (Informative) Measurement Uncertainty of the Voltage Test Level... 67
Annex H (Informative) Measurement of AE Impedance... 80
Annex I (Informative) Port-to-Port Injection... 84
Annex J (Informative) Amplifier Compression and Non-Linearity... 86
Bibliography... 92
Foreword
Currently, GB/T 17626 Electromagnetic Compatibility – Testing and Measurement Techniques
includes the following parts.
--- GB/T 17626.1-2006 Electromagnetic Compatibility - Testing and Measurement
Techniques - Overview of Immunity Tests;
--- GB/T 17626.2-2006 Electromagnetic Compatibility(EMC) - Testing and Measurement
Techniques - Electrostatic Discharge Immunity Test;
--- GB/T 17626.3-2016 Electromagnetic Compatibility- Testing and Measurement
Techniques- Radiated, Radio-Frequency, Electromagnetic Field Immunity Test;
--- GB/T 17626.4-2008 Electromagnetic Compatibility - Testing and Measurement
Techniques - Electrical Fast Transient/Burst Immunity Test;
--- GB/T 17626.5-2008 Electromagnetic Compatibility - Testing and Measurement
Techniques - Surge Immunity Test;
--- GB/T 17626.6-2017 Electromagnetic Compatibility - Testing and Measurement
Techniques - Immunity to Conducted Disturbances, Induced by Radio-Frequency Fields;
--- GB/T 17626.7-2008 Electromagnetic Compatibility - Testing and Measurement
Techniques - General Guide on Harmonics and Inter-Harmonics Measurements and
Instrumentation for Power Supply Systems and Equipment;
--- GB/T 17626.8-2006 Electromagnetic Compatibility (EMC) - Part 8.Testing and
Measurement Techniques - Power Frequency Magnetic Field Immunity Test;
--- GB/T 17626.9-2011 Electromagnetic Compatibility - Testing and Measurement
Techniques - Pulse Magnetic Field Immunity Test;
--- GB/T 17626.10-1998 Electromagnetic Compatibility - Testing and Measurement
Techniques - Damped Oscillatory Magnetic Field Immunity Test;
--- GB/T 17626.11-2008 Electromagnetic Compatibility - Testing and Measurement
Techniques - Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests;
--- GB/T 17626.12-2013 Electromagnetic Compatibility - Testing and Measurement
Techniques - Ring Wave Immunity Test;
--- GB/T 17626.13-2006 Electromagnetic Compatibility (EMC) - Testing and Measurement
Techniques - Harmonics and Inter-harmonics including Mains Signalling at A.C. Power
Port Low Frequency Immunity Test;
--- GB/T 17626.14-2005 Electromagnetic Compatibility - Testing and Measurement
Techniques - Voltage Fluctuation Immunity Test;
--- GB/T 17626.15-2011 Electromagnetic Compatibility—Testing and Measurement
Techniques – Flickermeter - Functional and Design Specifications;
--- GB/T 17626.16-2007 Electromagnetic Compatibility - Testing and Measurement
Techniques - Test for Immunity to Conducted Common Mode Disturbances in the
Frequency Range 0 Hz to 150 kHz;
--- GB/T 17626.17-2005 Electromagnetic Compatibility - Testing and Measurement
Techniques - Ripple on D.C. Input Power Port Immunity Test;
--- GB/T 17626.18-2016 Electromagnetic Compatibility - Testing and Measurement
Techniques - Damped Oscillatory Wave Immunity Test;
--- GB/T 17626.20-2014 Electromagnetic Compatibility - Testing and Measurement
Techniques - Emission and Immunity Testing in Transverse Electromagnetic (TEM)
Waveguide;
--- GB/T 17626.21-2014 Electromagnetic Compatibility - Testing and Measurement
Techniques - Reverberation Chamber Test Methods
--- GB/T 17626.24-2012 Electromagnetic Compatibility - Testing and Measurement
Techniques - Test Methods for Protective Devices for HEMP Conducted Disturbance;
--- GB/T 17626.27-2006 Electromagnetic Compatibility (EMC) - Testing and Measurement
Techniques - Unbalance Immunity Test;
--- GB/T 17626.28-2006 Electromagnetic Compatibility (EMC) - Testing and Measurement
Techniques - Variation of Power Frequency Immunity Test;
--- GB/T 17626.29-2006 Electromagnetic Compatibility (EMC) - Testing and Measurement
Techniques - Voltage Dips Short Interruptions and Voltage Variations on D.C. Input
Power Port Immunity Tests;
--- GB/T 17626.30-2012 Electromagnetic Compatibility - Testing and Measurement
Techniques - Power Quality Measurement Methods;
--- GB/T 17626.34-2012 Electromagnetic Compatibility—Testing and Measurement
Techniques - Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests
for Equipment with Mains Current More than 16 Aper Phase.
This Part is Part 6 of GB/T 17626.
This Part was drafted as per the rules specified in GB/T 1.1-2009.
This Part replaced GB/T 17626.6-2008 Electromagnetic Compatibility - Testing and
Measurement Techniques - Immunity to Conducted Disturbances Induced by Radio-Frequency
Fields. Compared with GB/T 17626.6-2008, the major technical contents of this Part are as
follows.
--- Modify the use of some CDNs;
--- Modify the calibration method of the current clamp;
--- Re-edited Clause 7 "Test Arrangement and Injection Method";
--- Modify Annex A, adding decoupling clamps, etc.;
--- Add Annex G Measurement Uncertainty of the Voltage Test Level;
--- Add informative Annexes H, I and J.
This Part used the translation method to equivalently adopt IEC 61000-4-6.2013 (Edition 4.0)
Electromagnetic Compatibility (EMC) – Part 4-6.Testing and Measurement Techniques –
Immunity to Conducted Disturbances, Induced by Radio-Frequency Fields.
The Chinese documents that have consistent correspondence with the international documents
normatively cited in this Part are as follows.
--- GB/T 4365-2003 Electrotechnical Terminology - Electromagnetic Compatibility [IEC
60050(161).1990, IDT]
In order to comply with the compilation requirements of national standards and Chinese
expression habits and to correct several clerical errors in IEC61000-4-6.2013, the following
editorial changes have been made in this Part.
--- Change the original standard name “Electromagnetic Compatibility (EMC) – Part 4-6.
Testing and Measurement Techniques – Immunity to Conducted Disturbances, Induced
by Radio-Frequency Fields” into “Electromagnetic Compatibility –Testing and
Measurement Techniques – Immunity to Conducted Disturbances, Induced by Radio-
Frequency Fields”;
--- Modify the Paragraph 1 of Clause 5 from “intentional electromagnetic fields emitted
from RF transmitters” into “electromagnetic fields emitted from RF transmitters”;
--- Change the location of NOTE 1 in 6.2 behind Table 3;
--- CORRECT “when the guidance of 7.4.1 is followed” in NOTE 1 of 6.2.3.1 INTO “when
the guidance of 7.7 is followed”;
--- CORRECT “uncertainty related to 7.4.1 is not considered in Annex G” in NOTEs 15 and
21 of Annex G INTO “uncertainty related to 7.7 is not considered in Annex G”;
--- Add an item in Bibliography.
This Part was proposed by and under the jurisdiction of National Technical Committee on
Electromagnetic Compatibility of Standardization Administration of China (SAC/TC 246).
Drafting organization of this Part. The 3rd Research Institute of China Electronics Technology
Group Corporation.
Chief drafting staffs of this Part. Xu Wei, Ding Shaohua, Lin Jingping, Zhang Xiaogang, and
Fu Zhaofeng.
The historical editions replaced by this Standard are as follows.
--- GB/T 17626.6-1998, GB/T 17626.6-2008.
Electromagnetic Compatibility – Testing and Measurement
Techniques – Immunity to Conducted Disturbances, Induced
by Radio-Frequency Fields
1 Scope
This Part of GB/T 17626 relates to the conducted immunity requirements of electrical and
electronic equipment to electromagnetic disturbances coming from intended radio-frequency
(RF) transmitters in the frequency range 150kHz up to 80MHz.
2 Normative References
The following documents are essential to the application of this document. For the dated
documents, only the versions with the dates indicated are applicable to this document; for the
undated documents, only the latest version (including all the amendments) is applicable to this
document.
IEC 60050(161) International Electrotechnical Vocabulary (IEV) – Chapter 161.
Electromagnetic Compatibility
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in IEC 60050(161) as well
as the following apply.
3.1 Artificial hand
Electrical network simulating the impedance of the human body under average operational
conditions between a hand-held electrical appliance and earth.
3.2 Auxiliary equipment; AE
Equipment necessary to provide the equipment under test (EUT) with the signals required for
normal operation and equipment to verify the performance of the EUT.
4 General
The source of disturbance covered by this Part is basically an electromagnetic field, coming
from intended RF transmitters, that may act on the whole length of cables connected to installed
equipment.
5 Test Levels
According to this standard, tests are required for induced disturbances caused by
electromagnetic fields coming from RF transmitters in the frequency range 150kHz to 80MHz.
6 Test Equipment and Level Adjustment Procedures
6.1 Test generator
The test generator includes all equipment and components for supplying the input port of each
coupling device with the disturbing signal at the required signal level at the appropriate
injection point.
7 Test Setup and Injection Methods
7.1 Test setup
The equipment to be tested is placed on an insulating support of 0.1 m ± 0.05 m height above
a reference ground plane.
7.2 EUT comprising a single unit
The EUT shall be placed on an insulating support 0.1 m above the reference ground plane.
8 Test Procedure
The EUT shall be tested within its intended operating and climatic conditions.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 17626.6-2017 be delivered?Answer: The full copy PDF of English version of GB/T 17626.6-2017 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 17626.6-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17626.6-2017_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 17626.6-2017 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 17626.6-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17626.6-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 17626.6-2017?A step-by-step guide to download PDF of GB/T 17626.6-2017_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 17626.6-2017".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|