Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 169760 (Apr 17, 2021)
HOME   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart
  

GB/T 14202-1993 (GBT 14202-1993)

Chinese Standard: 'GB/T 14202-1993'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)Related StandardStatusGoogle Book
GB/T 14202-1993English150 Add to Cart 0--10 minutes. Auto-delivered. Iron ores (sinter and pellets). Determination of bulk density GB/T 14202-1993 GB/T 14202-1993

  In 0~10 minutes time, full copy of this English-PDF will be auto-delivered to your email. See samples for translation quality.  

BASIC DATA
Standard ID GB/T 14202-1993 (GB/T14202-1993)
Description (Translated English) Iron ores (sinter and pellets). Determination of bulk density
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard H21
Classification of International Standard 73.06
Word Count Estimation 6,651
Date of Issue 1993/2/22
Date of Implementation 1993/10/1
Adopted Standard ISO/DIS 3852-1987, NEQ; ISO 3081-1986, NEQ; ISO 3082-1987, NEQ; ISO 3087-1987, NEQ; ISO 4701-1985, NEQ
Drafting Organization Baotou Iron and Steel Company
Proposing organization Ministry of Metallurgical Industry of the People Republic of China
Issuing agency(ies) State Bureau of Technical Supervision
Summary This Standard specifies two measurement methods used to determine the bulk density of natural and man-made iron ore. The method is suitable for a maximum particle size of iron ore in 40. 0mm or less. Method 2 is suitable for any of the largest iron ore particle size.

GB/T 14202-1993
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
UDC 622.341
H 21
Iron Ores (Sinter and Pellets) -
Determination of Bulk Density
铁矿石(烧结矿, 球团矿) 容积密度测定方法
ISSUED ON: FEBRUARY 22, 1993
IMPLEMENTED ON: OCTOBER 01, 1993
Issued by: State Bureau of Technical Supervision
Table of Contents
1 Theme Contents and Applicable Scope ... 3
2 Normative Reference ... 3
3 Definitions ... 3
4 Test Device ... 4
5 Specimen ... 5
6 Test Procedure ... 5
7 Expression of Results ... 6
8 Test Report ... 7
Additional Information: ... 8
Iron Ores (Sinter and Pellets) -
Determination of Bulk Density
This Standard refers to and adopts the following international standards, such as
ISO/DIS 3852-1987 Iron Ores - Determination of Bulk Density, ISO 3081-1986 Iron
Ores – Increment Sampling – Manual Method, ISO 3082-1987 Iron Ores – Sampling
and Sample Preparation Procedures – Mechanical Method, ISO 3087-1987 Iron Ores
– Determination of Moisture Content of a Lot, and ISO 4701-1985 Iron Ores –
Determination of Size Distribution by Sieving.
1 Theme Contents and Applicable Scope
This Standard specifies two measurement methods to determine the bulk density of
natural and artificial iron ores.
Method-1 is suitable for iron ore with a maximum particle size of 40.0 mm or less.
Method-2 is applicable to iron ores with any maximum particle size.
NOTE: The bulk density measured here does not necessarily represent the actual bulk density
of natural or artificial ores in a compact state or in a stacked state.
2 Normative Reference
GB 2007 General Rules for the Sampling and Sample Preparation of Minerals in
Bulk
GB 10122 Iron Ores (Sinter and Pellets)-Sampling and Sample Preparation for
Physical Testing
3 Definitions
3.1 Maximum particle size
The particle size is expressed by the sieve size (mm); when the residual amount on
the sieve is about 5% (mass percentage) of the total sieved ore, then the sieve size of
the sieve grade shall be the maximum particle size.
3.2 Bulk density
5 Specimen
The specimen shall be representative and consistent with the procedures agreed
between the supplier and the purchaser.
5.1 The number of specimens shall guarantee the amount of three bulk density tests;
that is, the mass of three times the volume of the container with some surplus. In
addition, there are specimens for measuring the supplying moisture and particle size;
these two factors are the main factors affecting bulk density.
5.2 In the case of Method-1 with a volume of 0.05m3, the smallest sample is 600kg; of
which three 150kg are used for bulk density test; and the other 150kg specimen is
used for measuring moisture and particle size distribution.
5.3 In the case of Method-2, the minimum specimen weight is 35t; and the
recommended quantity is 50t.
Depending on the type and composition of iron ore, the volume of a 30t specimen is
about 14~24m3.
6 Test Procedure
No matter which of the two methods is used in the bulk density test, double specimens
(that is, two tests) must be prepared; meanwhile, the ore moisture and particle size
distribution must be determined in accordance with the relevant provisions of GB 2007
and other standards.
6.1 Method-1
The test may use the delivered sample, or the naturally dried specimen, or the oven-
dried specimen. The oven-dried specimen needs to be dried to constant weight at
105±5 °C. Dry specimens need to be cooled to room temperature before testing.
6.1.1 Weigh the dry container (4.1.1), write down its mass as m0; weigh and accurate
to 0.2kg.
6.1.2 Fill the container with the delivered specimen, the naturally dried specimen or
the oven-dried speci......
Related standard: GB/T 23605-2020    GB/T 25897-2020
Related PDF sample: GB/T 2522-2017    GB/T 351-2019