GB 19189-2011 PDF English
US$70.00 · In stock · Download in 9 secondsGB 19189-2011: [GB/T 19189-2011] Quenched and tempered high strength steel plates for pressure vessels Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Obsolete GB 19189: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB 19189-2011 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
[GB/T 19189-2011] Quenched and tempered high strength steel plates for pressure vessels
| Obsolete |
| GB 19189-2003 | English | 279 |
Add to Cart
|
3 days
|
Quenched and tempered high strength steel plates for pressure vessels
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB 19189-2011
GB 19189-2011: [GB/T 19189-2011] Quenched and tempered high strength steel plates for pressure vessels
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB19189-2011
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.140.50
H 46
Replacing GB 19189-2003
Quenched and tempered high strength
steel plates for pressure vessel
Issued on: JUNE 16, 2011
Implemented on: FEBRUARY 01, 2012
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration Committee.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Order content ... 8
4 Representation method for designation ... 8
5 Dimensions, shapes, weights and allowable deviations ... 8
6 Technical requirements ... 9
7 Test methods ... 11
8 Inspection rules ... 12
9 Packaging, marks, quality certificate ... 13
10 Number rounding off ... 13
Annex A (informative) Comparison between new and old standard designations
... 14
Quenched and tempered high strength
steel plates for pressure vessel
1 Scope
This Standard specifies the dimensions, shapes, technical requirements, test
methods, inspection rules, packaging, marks and quality certificates of
quenched and tempered high strength steel plates for pressure vessel.
This Standard is applicable to the quenched and tempered high strength steel
plates with thickness of 10mm ~ 60mm for pressure vessel.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
GB/T 222, Permissible tolerances for chemical composition of steel products
GB/T 223.3, Methods for chemical analysis of iron, steel and alloy - The
diantipyrylmethane phosphomolybdate gravimetric method for the
determination of phosphorus content
GB/T 223.11, Methods for chemical analysis of iron, steel and alloy -
Determination of chromium content - Visual titration or potentiometric titration
method
GB/T 223.14, Methods for chemical analysis of iron, steel and alloy - The N-
benzoy-N-phenylhydroxylamine extraction photometric method for the
determination of vanadium content
GB/T 223.18, Methods for chemical analysis of iron, steel and alloy - The
sodium thiosulfate separation iodometric method for the determination of
copper content
GB/T 223.19, Methods for chemical analysis of iron, steel and alloy - The
neocuproine-chloroform extraction photometric method for the determination
of copper content
GB/T 223.23, Iron, steel and alloy - Determination of nickel content - The
gravimetric method after combustion in the pipe furnace for the determination
of carbon content
GB/T 223.72, Methods for chemical analysis of iron, steel and alloy - The
gravimetric method after combustion in the pipe furnace for the determination
of carbon content
GB/T 223.74, Methods for chemical analysis of iron, steel and alloy - The
combustion gravimetric/gas-volumetric method for the determination of
combined carbon content
GB/T 223.75, Methods for chemical analysis of iron, steel and alloy - The
methanol distillation-curcumin photometric method for the determination of
boron content
GB/T 223.76, Methods for chemical analysis of iron, steel and alloy - The
flame atomic absorption spectrometric method for the determination of
vanadium content
GB/T 228.1, Metallic materials - Tensile testing - Part 1 . Method of test at
room temperature (GB/T 228.1-2010, ISO 6892-1.2009, MOD)
GB/T 229, Metallic materials - Charpy pendulum impact test method
GB/T 232, Metallic materials - Bend test
GB/T 247, General rule of package mark and certification for steel plates
(sheets) and strips
GB/T 709, Dimensions, shape, weight and tolerances for hot rolled steel
sheets and strips
GB/T 2970, Thicker steel plate - Method for ultrasonic inspection
GB/T 2975, Steel and steel products - Location and preparation of samples
and test pieces for mechanical testing
GB/T 4336, Carbon and low-alloy steel - Determination of multi-element
contents - Spark discharge atomic emission spectrometric method (routine
method)
GB/T 8170, Rules of rounding off for numerical values & expression and
judgement of limiting values
GB/T 17505, Steel and steel products General technical delivery
requirements
GB/T 20066, Steel and iron - Sampling and preparation of samples for the
taken from the same sample blank. The sample blank shall be taken from 1/4
of the width of the steel plate. When the length of the steel plate after heat
treatment is not more than 15 m, the sample blank is cut at one end of the steel
plate. When the length of the steel plate after heat treatment is greater than 15
m, a sample blank shall be cut at each end of the steel plate; each sample blank
is taken from a set of samples (1 for stretch, 3 for impact and 1 for cold bend).
Shearing or flame cutting is allowed to cut the sample blank. However, the size
of the sample blank must ensure that the sample avoids the hardened or heat
affected zone caused by shearing or flame cutting.
7.3 The axial direction of the tensile, impact and cold bend specimens in Table
3 shall be perpendicular to the rolling direction of the steel sheet. The direction
of notch axis of Charpy (V-notch) impact specimen shall be vertical to the rolling
surface of the steel plate.
7.4 The sampling positions of tensile, impact tests shall be in accordance with
GB/T 2975. For steel plates with a thickness greater than 25 mm, the axis of
the impact test specimen shall be at a thickness of 1/4. The cold bend
specimens of steel plates with all thicknesses shall at least reserve one rolled
surface. The rolled surface is the outer surface of the bend test.
8 Inspection rules
8.1 Steel plate inspection is carried out by the supplier quality inspection
department. The purchaser has the right to perform the acceptance according
to this Standard.
8.2 The heat treatment of steel plates shall be in inspected and accepted by
batches.
8.3 If the steel plate inspection result does not meet the above requirements of
this Standard, it can be retested.
8.3.1 If the impact test results do not comply with the provisions of 6.4.1 of this
Standard, three more samples shall be taken from the same steel plate for
testing. The arithmetic mean of the impact absorption energy of the six samples
of the two groups shall not be lower than the specified value. Two samples are
allowed to be less than the specified value. However, only one sample with a
value less than 70% of the specified value is allowed.
8.3.2 The re-inspection and determination of other inspection items shall be
carried out in accordance with the relevant provisions of GB/T 17505.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB 19189-2011 be delivered?Answer: The full copy PDF of English version of GB 19189-2011 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB 19189-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB 19189-2011_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 19189-2011 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB 19189-2011?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 19189-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB 19189-2011?A step-by-step guide to download PDF of GB 19189-2011_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB 19189-2011".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|