YY/T 1487.2-2018 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YY/T 1487.2-2018: Dentistry--Dental rubber dam instruments--Part 2: Clamp forceps
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YY/T 1487.2-2018	139	Add to Cart	3 days	Dentistry--Dental rubber dam instruments--Part 2: Clamp forceps	Valid

Similar standards

YY/T 1691   YY/T 1692   YY/T 1702   YY/T 1485   YY/T 1486   YY/T 1487.1   

Basic data

Standard ID: YY/T 1487.2-2018 (YY/T1487.2-2018)
Description (Translated English): Dentistry--Dental rubber dam instruments--Part 2: Clamp forceps
Sector / Industry: Medical Device & Pharmaceutical Industry Standard (Recommended)
Classification of Chinese Standard: C33
Classification of International Standard: 11.060.20
Word Count Estimation: 7,746
Date of Issue: 2018-09-21
Date of Implementation: 2019-09-26
Issuing agency(ies): State Drug Administration

YY/T 1487.2-2018: Dentistry--Dental rubber dam instruments--Part 2: Clamp forceps

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Dentistry--Dental rubber dam instruments--Part 2. Clamp forceps ICS 11.060.20 C33 People's Republic of China Pharmaceutical Industry Standard Dentistry dental rubber dam Part 2. Clamps (ISO 16635-2.2014, MOD) Published on.2018-09-21 Implementation of.2019-09-26 State Drug Administration issued

Content

Foreword I Introduction II 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Requirements 2 5 Test method 3 6 mark 3

Foreword

YY/T 1487 "Dental Dental Dental Rubber Gear" is divided into two parts. ---Part 1. Perforator; --- Part 2. Clamps. This part is the second part of YY/T 1487. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This section uses the redrafting method to modify the use of ISO 16635-2.2014 "dental dental rubber damper device part 2. clip clamp". The main differences between this part and ISO 16635-2.2014 are as follows. --- According to China's market demand and industry status, the use of GB/T 20878-2007 "stainless steel and heat-resistant steel grades and chemical formation Sub-section replaces ISO 15510 "Stainless Steel - Chemical Composition"; --- Convert the steel number into the applicable steel number in China (see 4.7); --- Modified some formatting formats in accordance with GB/T 1.1-2009; --- Removed the ISO preface; --- For other international standards cited in this section, if it has been converted to Chinese standards, this section replaces the referenced international standard number with Corresponding national or industry standard number, and indicate the adoption relationship in Chapter 2 of this section. Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents. This part is proposed by the State Drug Administration. This part is divided into the Technical Committee of Dental Equipment and Devices by the National Technical Committee for Standardization of Dental Materials and Devices (SAC/TC99). SC1). This section drafted by. Guangdong Medical Device Quality Supervision and Inspection Institute, Guilin City Woodpecker Medical Devices Co., Ltd., Shenzhen City Speed Technology Development Co., Ltd. The main drafters of this section. Zhou Liangbin, Wu Weirong, Wu Yiming, Du Xiaotong, Wang Zhong, He Xiaofan.

Introduction

In order to promote the application of dental rubber dams, standardization of the tools and materials required is necessary. In dental clinical practice, dental rubber tongs are in contact with the patient under normal use as intended. Dentistry dental rubber dam Part 2. Clamps

1 Scope

This part of YY/T 1487 specifies the requirements and test methods for dental rubber dampers.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 230.1 Rockwell hardness test for metallic materials - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T Ruler) (GB/T 230.1-2009, ISO 6508-1.2005, MOD) GB/T 4340.1 Vickers hardness test for metallic materials - Part 1. Test methods (GB/T 4340.1-2009, ISO 6507- 1.2006, MOD) GB/T 9937 (all parts) Oral vocabulary [ISO 1942 (all parts)] GB/T 20878-2007 Stainless steel and heat resistant steel grades and chemical composition YY/T 0802 Information on the treatment of re-sterilizable medical devices provided by the sterilization manufacturer of medical devices (YY/T 0802- 2010, ISO 17664.2004, IDT) YY/T 1487.1 Dentistry dental cataract technology Part 1. Punchers (YY/T 1487.1-2016, ISO 16635-1. 2013, MOD)

3 Terms and definitions

The following terms and definitions as defined in GB/T 9937 and YY/T 1487.1 apply to this document. 3.1 Dental rubber damper dentalrubberdam Dental barrier Rubber dam rubberdam An elastic sheet made of natural latex or synthetic material used to repair one or several teeth and other parts of the mouth during tooth restoration isolation. 3.2 Lock part lockingpart The device located near the joint of the clamp handle automatically locks when the clamp is opened to secure the clamp after the clamp is clamped. 3.3 Clamp working end clampreceiver The clamp is used to clamp and place the working end of the rubber baffle and connect it to the joint of the clamp through a connecting piece. Note. Guided by the joint, the working end is opposite to the direction of movement of the handle. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YY/T 1487.2-2018_English be delivered?

Answer: Upon your order, we will start to translate YY/T 1487.2-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YY/T 1487.2-2018_English with my colleagues?

Answer: Yes. The purchased PDF of YY/T 1487.2-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.