YY/T 1487.1-2016 English PDF

US$159.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YY/T 1487.1-2016: Dentistry--Dental rubber dam technique--Part 1: Hole punch
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YY/T 1487.1-2016	159	Add to Cart	3 days	Dentistry--Dental rubber dam technique--Part 1: Hole punch	Valid

Similar standards

YY/T 1691   YY/T 1692   YY/T 1702   YY/T 1487.2   YY/T 1486   YY/T 1485   

Basic data

Standard ID: YY/T 1487.1-2016 (YY/T1487.1-2016)
Description (Translated English): Dentistry--Dental rubber dam technique--Part 1: Hole punch
Sector / Industry: Medical Device & Pharmaceutical Industry Standard (Recommended)
Classification of Chinese Standard: C33
Word Count Estimation: 8,865
Date of Issue: 2016-07-29
Date of Implementation: 2017-06-01
Regulation (derived from): State Food and Drug Administration Notice 2016 (No.129)
Issuing agency(ies): State Food and Drug Administration

YY/T 1487.1-2016: Dentistry--Dental rubber dam technique--Part 1: Hole punch

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Dentistry - Dental rubber dam technique - Part 1. Hole punch ICS 11.060.20 C33 People's Republic of China Pharmaceutical Industry Standard Dental Dental Rubber Barrier Technology Part 1. Punching device (ISO 16635-1..2013, MOD) 2016-07-29 released 2017-06-01 implementation State Food and Drug Administration issued Directory Preface III Introduction IV 1 Scope 1 2 normative reference document 1 3 Terms and definitions 1 4 requirements 2 5 Test method 4 6 mark 4

Foreword

YY/T 1487 "dental dental rubber barrier technology" is divided into two parts. - Part 1. Punchers; Part 2. Clamps. This part is part 1 of YY/T 1487. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This section uses the re-drafting method to modify the use of ISO 16635-1..2013 Dental Dental Rubber Barrier Process Part 1. Punching The main differences between this section and ISO 16635-1..2013 are as follows. --- According to China's market demand and industry status, using the national standard "GB/T 20878-2007 stainless steel and heat-resistant steel grades and Composition "to replace the international standard" ISO 15510 stainless steel - chemical composition "; --- in the "4.4 template features" under the 5-hole template to increase the relevant requirements; --- in accordance with GB/T 1.1-2009 some of the arrangement format has been modified; - For international standards cited in this section, if converted to our standard, this section will replace the international standard number referenced The corresponding country or industry standard number, and indicate the use of the relationship in Chapter 2 of this section. Please note that some of the contents of this document may involve patents. The issuer of this document does not assume responsibility for the identification of these patents. This section is proposed by the State Food and Drug Administration. This part of the National Dental Material and Equipment Standardization Technical Committee of Dental Equipment and Instruments Subcommittee (SAC/TC99 SC1). This part of the drafting unit. the State Food and Drug Administration Guangzhou Medical Device Quality Supervision and Inspection Center, Guilin woodpecker medical equipment Limited company. This part of the main drafters. Wu Yiming, Zhou Liangbin, Du Xiao Shu, Liu Sisheng.

Introduction

In order to promote the application of dental rubber barriers, the standardization of the required tools and materials is necessary. In dental practice, the punters are not in contact with the patient in the intended use of the intended use. Dental Dental Rubber Barrier Technology Part 1. Punching device

1 Scope

This part of YY/T 1487 specifies the requirements and test methods for dental rubber barrier punters.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 230.1 Metallic materials - Rockwell hardness test - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T) (GB/T 230.1-2009, ISO 6508-1..2005, MOD) GB/T 4340.1 Metallic materials - Vickers hardness test - Part 1. Test methods (GB/T 4340.1-2009, ISO 6507-1. 2006, MOD) GB/T 9937 (all parts) Oral vocabulary [ISO 1942 (all parts)] Stainless steel and heat - resistant steel grades and their chemical composition GB/T

3 terms and definitions

GB/T 9937 (all parts) as defined and the following terms and definitions apply to this document. 3.1 Dental rubber barrier dentalrubberdam Dental barrier Rubber barrier rubber A sheet of elastic material used to isolate one or more teeth from the rest of the mouth. 3.2 Dental Rubber Clamps dentalrubberdamclamp Suitable for all kinds of tooth-shaped fixtures, usually made of spring steel, by two can closely fit the contours of the teeth and a jaw or Two connecting jaws of the arch composition. Note. Typically, each jaw has a hole that can be clamped and secured by a clamp. 3.3 Clamp clampforceps The pliers used to install and remove the dental rubber barrier. Note. When used, the clamp clamps the rubber barrier by inserting the two retaining pins into the holes of the jaws; then the rubber barrier is distracted and mounted on the teeth position. 3.4 Punch holepunch For pliers with different diameter holes in the dental rubber barrier. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YY/T 1487.1-2016_English be delivered?

Answer: Upon your order, we will start to translate YY/T 1487.1-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YY/T 1487.1-2016_English with my colleagues?

Answer: Yes. The purchased PDF of YY/T 1487.1-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.