YY/T 0841-2023 PDF EnglishUS$940.00 · In stock · Download in 9 seconds
YY/T 0841-2023: Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid YY/T 0841: Historical versions
Similar standardsYY/T 0841-2023: Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YYT0841-2023 YY PHARMACEUTICAL INDUSTRY STANDARD ICS 11.040 CCS C 30 Replacing YY/T 0841-2011 Medical electrical equipment – Recurrent test and test after repair of medical electrical equipment (IEC 62353.2014, MOD) Issued on. SEPTEMBER 05, 2023 Implemented on. SEPTEMBER 15, 2025 Issued by. National Medical Products Administration Table of ContentsForeword... 3 Introduction... 5 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 7 4 Requirements... 18 4.1 * General requirements... 18 4.2 Testing before putting into service, after modifications, and after repair... 20 4.3 * Recurrent test... 20 5 * Tests... 21 5.1 General... 21 5.2 Visual inspection... 21 5.3 Measurements... 22 5.4 Functional test... 36 6 Results of test and evaluation... 37 6.1 Reporting of results... 37 6.2 Evaluation... 37 Annex A (Informative) General guidance and rationale... 39 Annex B (Informative) Sequence of testing... 50 Annex C (Normative) Requirements for the measurement equipment and for measurement circuits for protective earth resistance and leakage currents... 52 Annex D (Informative) Patient environment... 56 Annex E (Normative) Allowable values for leakage currents from GB 9706.1... 57 Annex F (Informative) Testing intervals... 61 Annex G (Informative) Example of test documentation... 63 Annex H (Informative) Notes on testing ME systems... 64 Bibliography... 66ForewordThis document is drafted in accordance with the rules provided in GB/T 1.1-2020 Directives for standardization - Part 1.Rules for the structure and drafting of standardizing documents. This document replaces YY/T 0841-2011 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment. Compared with YY/T 0841-2011, in addition to structural adjustment and editorial modification, the main technical revisions are as follows. -- Add the definitions of “configuration” and “line-to-earth voltage” (see 3.8 and 3.17); -- Add some terms in GB 9706.1-2020 (see 3.28, 3.31, 3.33, 3.35); -- Delete the definition of “normal condition” (see 3.26 of the 2011 edition); -- Change the measuring of protective earth resistance to adapt to the test of ME systems in GB 9706.1-2020 (see 5.3.2; 5.3.2 of the 2011 edition); -- Add the measurement of insulation resistance (see 5.3.3); -- Add the method of measuring the equipment leakage currents, and explain the relevant contents (see 5.3.4.1); -- Add some required values (see Table 2). This document adopts IEC 62353.2014 Medical electrical equipment – Recurrent test and test after repair of medical electrical equipment by modification. The technical differences between this document and IEC 62353.2014 and their reasons are as follows. -- Use the normatively referenced GB 9706.1 to replace IEC 60601-1.2005 and IEC 60601-1.2005+AMD 1.2012 to adapt to our country's technical conditions; -- Use the normatively referenced GB 4793.1 to replace IEC 61010-1 (see Annex C) to adapt to our country's technical conditions; -- Use the normatively referenced GB 4793.5 to replace IEC 61010-031 (see Annex C) to adapt to our country's technical conditions; -- Use the normatively referenced GB/T 17045 to replace IEC 61140 (see 6.2) to adapt to our country's technical conditions; -- Use the normatively referenced GB/T 18216.1 to replace IEC 61557-1 (see Annex C) to adapt to our country's technical conditions; -- Use the normatively referenced GB/T 18216.2 to replace IEC 61557-2 (see Annex C) to adapt to our country's technical conditions; -- Use the normatively referenced GB/T 18216.4 to replace IEC 61557-4 (see Annex C) to adapt to our country's technical conditions. The following editorial changes have also been made to this document. -- Delete some explanatory content in the Scope and move it to the Introduction; -- Move the general requirements for testing from the Scope to 4.1; -- Use the informatively referenced GB/T 5465.2 to replace IEC 60417 (see 3.45, 3.46, 3.47, Annex A); -- Add some notes. Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying patents. This document was proposed by National Medical Products Administration. This document shall be under the jurisdiction of National Technical Committee 10 on Medical Electrical Equipment of Standardization Administration of China (SAC/TC 10). Drafting organizations of this document. Shanghai Institute of Medical Device Inspection, Shenzhen Mindray Bio-Medical Electronics Co., Ltd., Siemens Shanghai Medical Equipment Ltd. Main drafters of this document. Zhuo Yue, Tao Hua, Bao Hua, Feng Xiaoyun, Feng Guangzhou, Zhou Jiajie. The previous versions of this document and the documents which are replaced by this document are as follows. -- First published in 2011 as YY/T 0841-2011; -- This is the first revision.1 ScopeThis document specifies testing of medical electrical equipment and medical electrical system (hereafter referred to as ME equipment and ME systems) or parts of such equipment or systems, which comply with GB 9706.1, before putting into service, during maintenance, during inspection, after repair and in other services, or on occasion of recurrent tests.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB 4793.1, Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1.General requirements (GB 4793.1-2007, IEC 61010-1.2001, IDT)3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply. Some of the definitions are necessarily different from those in GB 9706.1, as different measuring methods are used.4 RequirementsThe responsible party may omit certain tests based on manufacturers’ written information or accompanying documents. ME systems shall be visually inspected to determine whether the ME system configuration is still the same as at the time of the last inspection, or whether any equipment making up the ME system has been exchanged, added or removed. 5 Tests For Class I ME equipment, it shall be demonstrated that the protective earth conductor connects all accessible conductive parts, which may become live in case of a fault, in a proper and safe way to either the protective earth terminal of the mains plug for plugged-in equipment or to the protective earth point for permanently installed equipment. ME equipment is separated from mains, and the equipment leakage current is measured according to Figure 6.6 Results of test and evaluationThe evaluation of safety of ME equipment or ME system shall be performed by electrically skilled persons (as defined in GB 17045) who have the appropriate training for testing the equipment under test. If using the measurement equipment listed in Annex C, measurement uncertainties do not need to be taken into consideration for the limits.Annex A(Informative) General guidance and rationale ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of YY/T 0841-2023 be delivered?Answer: The full copy PDF of English version of YY/T 0841-2023 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of YY/T 0841-2023_English with my colleagues?Answer: Yes. The purchased PDF of YY/T 0841-2023_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- YY/T 0841-2023 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version YY/T 0841-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YY/T 0841-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of YY/T 0841-2023?A step-by-step guide to download PDF of YY/T 0841-2023_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "YY/T 0841-2023". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
