Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

YS/T 903.2-2013 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 903.2-2013: Method for chemical analysis of indium scraps. Part 2: Determination of tin content. Iodometric titration
Status: Valid
Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
YS/T 903.2-2013189 Add to Cart 3 days Method for chemical analysis of indium scraps. Part 2: Determination of tin content. Iodometric titration Valid

Similar standards

GB/T 39859   GB/T 23513.5   GB/T 23513.1   YS/T 948   YS/T 903.1   YS 783   

Basic data

Standard ID: YS/T 903.2-2013 (YS/T903.2-2013)
Description (Translated English): Method for chemical analysis of indium scraps. Part 2: Determination of tin content. Iodometric titration
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H66
Classification of International Standard: 77.120.99
Word Count Estimation: 7,732
Regulation (derived from): Ministry of Industry and Information Technology Bulletin No. 52, 2013; industry standard for filing Notice No. 1 of 2014 (No. 169 overall)
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the determination of the amount of indium tin scrap. This standard applies to the determination of ITO target scrap of tin, measuring range: 2. 00% to 10. 00%.

YS/T 903.2-2013: Method for chemical analysis of indium scraps. Part 2: Determination of tin content. Iodometric titration


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Method for chemical analysis of indium scraps Part 2. Determination of tin content Iodometric titration. ICS 77.120.99 H66 People's Republic of China Nonferrous Metals Industry Standard Methods for chemical analysis of indium scrap Part 2. Determination of tin content Iodometry Part 2. Determinationoftincontent-Iodometrictitration Issued on. 2013-10-17 2014-03-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

YS/T 903 "chemical analysis of indium scrap" is divided into two parts. --- Part 1. Determination of the amount of indium EDTA titration; --- Part 2. Determination of tin content Iodometry. This section YS/T Part 2 903. This section drafted in accordance with GB/T 1.1-2009 given rules. The non-ferrous metal part by the National Standardization Technical Committee (SAC/TC243) centralized. This section is drafted. Guangxi metallurgical products Quality Supervision, Inspection Station, Guangxi Zhuang Autonomous Region Analysis and Testing Center, Guilin University of Technology, Liuzhou one hundred tough special Advanced Materials Co., Ltd. The main drafters of this section. Ye Kaifu, Zhou Sulian, Wuxiang Wu, Xie Tao, Li Yi together, Zhang, He Xiaohu, Huangzhao Min, Gui Luan, Huang Xusheng. Methods for chemical analysis of indium scrap Part 2. Determination of tin content Iodometry

1 Scope

YS/T of the provisions of the section 903 determination of the amount of indium tin scrap. This section applies to the determination of tin in ITO target scrap quantity, measurement range. 2.00% to 10.00%.

2 Method summary

After sodium oxide sample melted in hydrochloric acid medium, with iron and aluminum will be reduced to tetravalent tin divalent tin. Starch as indicator, Potassium iodate standard solution was titrated to end test solution was light blue, calculate the amount of tin.

3 Reagents

Unless otherwise indicated, this part of the reagents were analytical reagent, the water for the two water. 3.1 hydrochloric acid (ρ = 1.19g/mL). 3.2 sodium peroxide. 3.3 reduced iron. 3.4 potassium iodate. 3.5 potassium iodide. 3.6 sodium hydroxide. 3.7 soluble starch. 3.8 hydrochloride (11). 3.9 hydrochloride (19). 3.10 aluminum (mass fraction ≥99.5%). 3.11 starch solution (5g/L). Weigh 0.5g soluble starch (3.7) and placed in 250mL beaker with a small amount of cold water into a paste, in Was added with stirring 100mL of hot water, a little boil, add cooled 0.1g sodium (3.6), 3g of potassium iodide (3.5) and shake to dissolve. The time is now equipped with. 3.12 tin standard solution. Weigh 0.5000g metal tin [w (Sn) ≥99.99%], placed in 250mL beaker, add 60mL hydrochloric acid (3.1), covered with a watch glass, low heat until completely dissolved, cooled to room temperature, the solution was transferred to 500mL volumetric flask, hydrochloric acid (3.9) dilute Diluted to volume, and mix. This solution 1mL containing 1.0mg tin. 3.13 potassium iodate standard solution 3.13.1 formulated Weigh 0.72g potassium iodate (3.4), 9g of potassium iodide (3.5), 0.3g of sodium hydroxide (3.6), placed in 500mL beaker, add 200mL of water, heated until completely dissolved, the solution was filtered with glass wool in 1000mL volumetric flask, dilute with water to volume, and mix. 3.13.2 Calibration Pipette 25.00mL tin standard solution (3.12) placed in 300mL conical flask, 150mL of hydrochloric acid (3.8), 1g reduced iron
......
Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 903.2-2013_English be delivered?

Answer: Upon your order, we will start to translate YS/T 903.2-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 903.2-2013_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 903.2-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.