YS/T 824-2012 English PDF

US$159.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 824-2012: Aluminum-tin masteralloy for titanium alloy
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 824-2012	159	Add to Cart	3 days	Aluminum-tin masteralloy for titanium alloy	Valid

Similar standards

GB/T 2524   GB/T 3620.1   YS/T 744   YS/T 828   YS/T 830   YS/T 829   

Basic data

Standard ID: YS/T 824-2012 (YS/T824-2012)
Description (Translated English): Aluminum-tin masteralloy for titanium alloy
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H64
Classification of International Standard: 77.150.50
Word Count Estimation: 6,641
Regulation (derived from): Ministry of Industry and Information Technology Bulletin 2012 No. 55; industry standard filing Notice 2013 No. 1 (No. 157 overall)
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the titanium alloy of aluminum tin requirements, test methods, inspection rules and signs, packaging, transportation, storage, quality certificates and contracts (or orders) content. This standard applies to titanium aluminum tin a

YS/T 824-2012: Aluminum-tin masteralloy for titanium alloy

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Aluminum-tin masteralloy for titanium alloy ICS 77.150.50 H64 People's Republic of China Nonferrous Metals Industry Standard Titanium aluminum master alloys of tin Issued on. 2012-11-07 2013-03-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized. This standard is drafted by. Baoji Titanium Group Ltd., Baoji Titanium Industry Co., Ltd., Baoji Titanium Special Metals Co., China has Color Metal Industry Standards and Metrology Institute for Quality. The main drafters of this standard. Fengjun Ning, Li, Ho Ping-zhi, Liu, Chen Feng, Rong Yang, Lixian Jun, Zhang Xianming, Zhangjiang Feng. Titanium aluminum master alloys of tin

1 Scope

This standard specifies requirements for titanium aluminum master alloy of tin, test methods, inspection rules and signs, packaging, transportation, storage, quality certificate Specification and contracts (or orders) content. This standard applies to intermediate titanium aluminum tin alloy.

2 Requirements

2.1 Grades and chemical composition Grades and chemical composition of the product shall comply with the requirements in Table 1. Table 1 Trademark Chemical composition (mass fraction) /% Main elements of impurity element of not more than Al Sn Fe CON Al-37Sn balance 35.0 39.0 0.30 0.20 0.35 0.05 ~ 2.2 crumb-like particle The product should be available in the form of chips, crumb size should meet the requirements of Table 2, allowing a small amount of oversize and undersize material is present, but the total weight Delivery batch weight must not exceed 5.0%. Table 2 Grade crumb size/mm Al-37Sn (0.08 ~ 1.0) × (3 ~ 15) × (3 ~ 15) 2.3 High-density inclusions Products should be no high-density inclusions. 2.4 appearance quality Product surface should be clean, no visual evidence of oil, oxide film and other inclusions. Test Method 3 Chemical analysis method 3.1 product is determined by the supply and demand sides negotiated. 3.2 crumb of particle size by sieving method to check, use the appropriate precision instrument checks if necessary. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 824-2012_English be delivered?

Answer: Upon your order, we will start to translate YS/T 824-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 824-2012_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 824-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.