|
||||||||||||||||||||||||||||||||||||
YS/T 763-2019 English PDFUS$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. YS/T 763-2019: (Graphitized cathode carbon block with calcined petroleum coke) Status: Valid YS/T 763: Evolution and historical versions
Basic data
YS/T 763-2011: Graphitized coke produced by electrical calciner---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Graphitized coke produced by electrical calciner ICS 71.100.10 Q52 People's Republic of China Nonferrous Metals Industry Standard Electrically Calcined coke graphitization Issued on. 2011-12-20 2012-07-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized. This standard is drafted by. CPI Ningxia Energy Aluminum Carbon Co., Ltd. Green-hsin. The main drafters of this standard. Hou, Liu Jianping, Li Chunhu, Xu Xinning, Jane Guofeng, Huang Qian, Chen Sheng. Electrically Calcined coke graphitization1 ScopeThis standard specifies the electric furnace production of calcined petroleum coke graphitization requirements, test methods, inspection rules, packaging, labeling, transportation, storage and Order Manifest (or contract) content. This standard applies to the production of electrolytic tank graphite cathode is electrically calcined raw material graphitized petroleum coke (hereinafter referred to as graphitized coke).2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 8170 repair value expressed about the rules and limit values and judgment YS/T 587.1 was determined by carbon anode Calcined petroleum coke detection methods - Part 1 of ash content YS/T 587.4 carbon anode Calcined petroleum coke was measured by detection of sulfur content - Part 4 YS/T 587.6 carbon anode Calcined petroleum coke detection method - Part 6 powder resistivity measurement YS/T 587.9 carbon anode Calcined petroleum coke was measured by detection of the true density Part 9 YS/T 701 aluminum carbon materials and products packaging, labeling, transportation and storage YS/T 763 aluminum graphitized cathode products graphitization degree measurement method3 Requirements3.1 Categories Physical and chemical properties of coke by graphite into DSJ-1, DSJ-2 two grades. 3.2 Physical and Chemical Properties Graphitized coke ash content, sulfur content, powder resistivity, true density and graphitization degree should meet the requirements in Table 1. Table 1 Trademark Physical and chemical properties Ash content /% no greater than Sulfur content /% no greater than Powder resistivity / (ΜΩ · m) no greater than True density / (G/cm3) not less than Graphitization degree /% not less than DSJ-1 0.7 0.2 130 2.16 80 DSJ-2 0.9 0.5 150 2.12 60 Note. The test values determined using rounding comparative method, numerical rounding rules, in accordance with relevant provisions of GB/T 8170, the number of bits and rounding limits listed in the table Digits consistent. ...... |