YS/T 710.4-2009 English PDF

US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 710.4-2009: Method for chemical analysis of cobalt oxide. Part 4: Determination of arsenic content. Atomic fluorescence spectrometry
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 710.4-2009	169	Add to Cart	3 days	Method for chemical analysis of cobalt oxide. Part 4: Determination of arsenic content. Atomic fluorescence spectrometry	Valid

Similar standards

GB/T 3884.2   GB/T 3884.1   YS/T 710.6   YS/T 710.2   YS/T 710.3   YS/T 710.1   

Basic data

Standard ID: YS/T 710.4-2009 (YS/T710.4-2009)
Description (Translated English): Method for chemical analysis of cobalt oxide. Part 4: Determination of arsenic content. Atomic fluorescence spectrometry
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H13
Classification of International Standard: 77.120.70
Word Count Estimation: 6,621
Date of Issue: 2009-12-04
Date of Implementation: 2010-06-01
Older Standard (superseded by this standard): YS/T 256-2000
Regulation (derived from): MIIT [2009] No. 66
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the amount of cobalt oxide Determination of arsenic. This standard applies to cobalt oxide of arsenic content. Measuring range: 0. 0010% to 0. 020%

YS/T 710.4-2009: Method for chemical analysis of cobalt oxide. Part 4: Determination of arsenic content. Atomic fluorescence spectrometry

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Method for chemical analysis of cobalt oxide.Part 4. Determination of arsenic content.Atomic fluorescence spectrometry ICS 77.120.70 H13 People's Republic of China Nonferrous Metals Industry Standard Methods for chemical analysis of cobalt oxide Part 4. Determination of arsenic content Atomic Fluorescence Spectrometry Posted 2009-12-04 2010-06-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

YS/T 710 "cobalt oxide chemical analysis method" is divided into six sections. --- Part 1. Determination of cobalt content potentiometric titration; --- Part 2. Determination of sodium content by flame atomic absorption spectrometry; --- Part 3. Determination of the amount of sulfur by high frequency combustion infrared absorption method; --- Part 4. Determination of arsenic content by atomic fluorescence spectrometry; --- Part 5. Determination of silicon content - Molybdenum blue spectrophotometric method; --- Part 6. calcium, cadmium, copper, iron, magnesium, manganese, nickel, lead and zinc content - Inductively coupled plasma atomic emission spectrometry. This section YS/T Part 4 710. The partial replacement of YS/T 256-2000 "cobalt oxide" Appendix D. Compared with YS/T 256-2000 "cobalt oxide" Appendix D, this section The main changes are as follows. --- Atomic fluorescence spectrometry alternative DDTC-Ag spectrophotometry. --- Complements the precision and quality assurance and control provisions. The non-ferrous metal part by the National Standardization Technical Committee and centralized. This section is responsible for drafting unit. Zhuzhou Smelter Group Co., Ltd. Participated in the drafting of this section. Beijing Mining Research Institute, Guangzhou Nonferrous Metal Research Institute. The main drafters of this section. Yan Weiqiang, Zong Pu, in force, Tangshu Fang, Liu Tianping, Dai Fengying. Methods for chemical analysis of cobalt oxide Part 4. Determination of arsenic content Atomic Fluorescence Spectrometry

1 Scope

YS/T of the provisions of section 710 of the method for the determination of arsenic content in the cobalt oxide. This section applies to the determination of arsenic content of cobalt oxide. Measurement range. 0.0010% to 0.020%.

2 Method summary

Sample was dissolved in aqua regia, hydrochloric acid solution, thiourea - ascorbic acid pre-reduction in the hydride generator, arsenic is potassium borohydride Reduction of hydride with argon introduced into a quartz furnace atomizer, the fluorescence intensity was measured arsenic in the atomic fluorescence spectrometer.

3 Reagents

3.1 commercially available reagents 3.1.1 hydrochloric acid (ρ1.19g/mL), pure class distinctions. 3.1.2 nitrate (ρ1.42g/mL), pure class distinctions. 3.2 solution 3.2.1 sodium hydroxide solution (50g/L). 3.2.2 hydrochloric acid (1 + 1). 3.2.3 thiourea - ascorbic acid solution (50g/L + 50g/L, the time is now equipped with). Weigh thiourea, ascorbic acid each 25g in 300mL beaker The volume to be dissolved in 500mL flask. 3.2.4 hydrochloric acid (1 + 9). 3.2.5 solution of potassium borohydride (15g/L). When called to take 15g potassium borohydride, potassium hydroxide dissolved in 1000mL (100g/L) solution, with Now equipped. 3.3 standard solution 3.3.1 arsenic standard stock solution. Weigh 0.1321g trioxide reference reagent (previously at 100 ℃ ~ 105 ℃ baking 1h, and placed in dry Dryer cooled to room temperature) in the 300mL beaker, add 20mL of sodium hydroxide solution (3.2.1), low heat to dissolve completely neutralized with hydrochloric acid To slightly acidic, cooled and transferred to 1000mL volumetric flask and dilute to volume, and mix. This solution 1mL containing 0.1mg arsenic. 3.3.2 arsenic standard solution. Pipette 5.00mL arsenic standard stock solution (3.3.1), placed in 500mL volumetric flask, was added 50mL of hydrochloric acid (3.1.1), dilute with water to volume, and mix. This solution 1mL containing 1μg of arsenic.

4 Instrument

Atomic fluorescence spectrometer, with a high-intensity arsenic hollow cathode lamp. Under optimum working conditions for those who can reach the following indicators can be used. --- Detection limit. not more than 1 × 10-9g/mL; --- Precision. measuring the fluorescence intensity with 0.1μg/mL of arsenic standard solution 10 times the standard deviation should not exceed the average fluorescence intensity 5.0%. Table 1 Reference instrument operating conditions. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 710.4-2009_English be delivered?

Answer: Upon your order, we will start to translate YS/T 710.4-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 710.4-2009_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 710.4-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.