YS/T 71-2013 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 71-2013: Wet lead
Status: Valid

YS/T 71: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 71-2013	209	Add to Cart	3 days	Wet lead	Valid
YS/T 71-2004	239	Add to Cart	2 days	Wet lead	Obsolete
YS/T 71-1993	199	Add to Cart	2 days	(Crude lead)	Obsolete

Similar standards

GB/T 469   YS/T 649   GB/T 467   YS/T 76   YS/T 70   YS/T 72   

Basic data

Standard ID: YS/T 71-2013 (YS/T71-2013)
Description (Translated English): Wet lead
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H62
Classification of International Standard: 77.150.60
Word Count Estimation: 8,852
Older Standard (superseded by this standard): YS/T 71-2004
Quoted Standard: GB/T 8170; YS/T 248.1; YS/T 248.2; YS/T 248.3; YS/T 248.4; YS/T 248.5; YS/T 248.6; YS/T 248.7; YS/T 248.8; YS/T 248.9; YS/T 248.10
Regulation (derived from): Ministry of Industry and Information Technology Bulletin No. 52, 2013; industry standard for filing Notice No. 1 of 2014 (No. 169 overall)
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the requirements for crude lead, test methods, inspection rules and signs, packaging, transportation, storage and quality certificate with the contract (or order form) content. This standard applies to crude metallurgical furnace s

YS/T 71-2013: Wet lead

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Wet lead ICS 77.150.60 H62 People's Republic of China Nonferrous Metals Industry Standard Replacing YS/T 71-2004 Crude lead Issued on. 2013-10-17 2014-03-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. Instead of the standard YS/T 71-2004 "crude lead." Compared with YS/T 71-2004 "crude lead", the main changes are as follows. --- Remove the chemical composition of crude lead content requirements of impurity Cu; --- Large crude lead ingot rings made of tare requirements; --- Large drill crude lead ingots arbitration law the number of samples has been modified; --- Added small crude lead ingot, crude lead ingot melting process large arbitration sampling methods; --- Added after melting of crude lead slag samples sampling methods; --- Crude lead transport, storage has been modified. This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized. This standard is drafted by. Henan Yuguang Gold & Lead Co., Ltd., Hunan Shuikoushan Nonferrous Metals Group Co., Ltd. Zhuzhou Smelter Group Co., Ltd. The main drafters of this standard. Gui, Wang Ping, Tan Yi-Wen, often national war, Jiang Dongsheng, Hu, Zhou Wenying, Tangru Fu, Peng Hailiang, Gou Tao. This standard replaces the standards previously issued as follows. --- YS/T 71-1993, YS/T 71-2004; --- YB38-1982. Crude lead

1 Scope

This standard specifies the requirements of crude lead, test methods, inspection rules and signs, packaging, transportation, storage and quality certificate with the contract (or order Manifest) content. This standard applies to the metallurgical furnace crude lead smelting produced.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 8170 repair value expressed about the rules and limit values and judgment YS/T 248 (all parts) Methods for chemical analysis of crude lead

3 Requirements

3.1 Categories Crude lead according to chemical composition divided into three grades. Pb98.0C, Pb96.0C, Pb94.0C. 3.2 Chemical composition Chemical composition of crude lead 3.2.1 shall comply with the requirements of Table 1. Table 1 Trademark Chemical composition (mass fraction) /% Pb content is not less than Impurity content of not more than Sb As Pb98.0C 98.0 0.8 0.6 Pb96.0C 96.0 0.9 0.7 Pb94.0C 94.0 1.0 0.9 3.2.2 crude lead in gold, silver valuable associated metals, should the batch determination, reported the results. 3.2.3 crude lead content of lead and impurities are found. 3.2.4 crude lead in lead content and rounding rules impurities test results performed in the provisions of GB/T 8170's. 3.2.5 demand side, such as the chemical composition of crude lead have special requirements, agreed upon by both parties. 3.3 Physical Specifications 3.3.1 crude lead ingot is rectangular trapezoidal in small ingots and billets two specifications. Small ingot ends should be prominent ears, ingot weight. 30kg ~ 50kg; ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 71-2013_English be delivered?

Answer: Upon your order, we will start to translate YS/T 71-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 71-2013_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 71-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version YS/T 71-2013?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 71-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.