Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

YS/T 56-2012 English PDF

Q: How long will the true-PDF of English version of YS/T 56-2012 be delivered?

Upon your order, we will start to translate YS/T 56-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Q: Can I share the purchased PDF of YS/T 56-2012_English with my colleagues?

Yes. The purchased PDF of YS/T 56-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Q: Does the price include tax/VAT?

Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries). Avoidance of Double Taxation Agreements (DTAs) between Singapore and 100+ Countries: https://www.iras.gov.sg/taxes/international-tax

Q: Do you accept my currency other than USD?

Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Q: Should I purchase the latest version YS/T 56-2012?

Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 56-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 56-2012: Metallic powders. Determination of the angle of repose
Status: Valid

YS/T 56: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 56-2012	209	Add to Cart	3 days	Metallic powders. Determination of the angle of repose	Valid
YS/T 56-1993	239	Add to Cart	2 days	(Metal powders - Determination of the natural slope angle)	Obsolete

Similar standards

YS/T 1297 GB/T 1479.2 GB/T 1479.1 YS/T 424.2 YS/T 424.3 YS/T 424.1

Basic data

Standard ID: YS/T 56-2012 (YS/T56-2012)
Description (Translated English): Metallic powders. Determination of the angle of repose
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H16
Classification of International Standard: 77.160
Word Count Estimation: 8,887
Older Standard (superseded by this standard): YS/T 56-1993
Quoted Standard: GB/T 3500-2008/ISO 3252-1999
Regulation (derived from): Ministry of Industry and Information Technology Bulletin 2012 No. 70; industry standard filing Notice 2013 No. 3 (total 159)
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the metal powder natural slope angle method. This standard applies to freely flow through or by means of vibrating funnel flow through aperture 7. 5 mm metal powder. This standard does not apply to readily absorb moisture or seriou

YS/T 56-2012: Metallic powders. Determination of the angle of repose

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Metallic powders.Determination of the angle of repose ICS 77.160 H16 People's Republic of China Nonferrous Metals Industry Standard Replacing YS/T 56-1993 Determination of metal powder --- natural slope angle Issued on. 2012-12-28 2013-06-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. Instead of the standard YS/T 56-1993 "Determination of metal powder --- the natural slope angle." Compared with this standard YS/T 56-1993, The main changes are as follows. --- Increased in Chapter 2; --- In Chapter 3, again shows the standard definition of the natural slope angle; --- Chapter 4, the measurement principles of natural slope angle was reformulated; --- Chapter 5, delete the "lower end of the funnel opening and closing of the gate fast," added the clause 5.3 positioning block, an increase of 2, 3, corresponding The structure of Figure 1, some changes; --- 7.3,7.4,7.5,7.6 the terms were revised; --- Chapter 8, increasing the arithmetic mean of the natural slope angle of the formula; --- Chapter 9, adding "If during the test using a vibrator, please indicate" requirements; Start heating "when the heating power starts to be a vacuum of up to 90%" to "be a vacuum of 10kPa --- Appendix A.3, the power supply". This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized. This standard is drafted by. Iron and Steel Research Institute, Shenzhen High-tech Co., Ltd. Grammy, Northwest Nonferrous Metal Research Institute. The main drafters of this standard. Li Hongyun, Zhu Li Ran, pear Yan, Cheng Wenwu, Aijian Ling, Dong Feng collar Determination of metal powder --- natural slope angle

1 Scope

This standard specifies the method for determination of the natural slope angle of the metal powder. This standard applies to be able to flow freely through or by means of a vibrating flow through the aperture 7.5mm metal powder funnel. This standard does not readily absorb moisture or severely agglomerated powder.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 3500-2008/ISO 3252.1999 Powder Metallurgy term

3 Terms and Definitions

Terms and definitions GB/T 3500 defined apply to this document. For ease of use, repeat the following listed in GB/T 3500 surgery Terms and definitions. Natural slope angle angleofrepose When the angle of repose of powder formed pyramid slope between the horizontal plane. [GB/T 3500-2008/ISO 3252.1999, the definition of 1501] Principle 4 Metal powder through a funnel from a certain height level round table piled until a metal powder overflows from truncated cone periphery to form a stable Pyramid, using a protractor to measure out powder cone angle of slope and the bottom, is the natural slope angle.

5 device

5.1 natural slope angle measuring device Natural slope angle measuring device shown in Figure 1. 5.2 Funnel Made of brass, the upper end of the funnel inner diameter 50.8mm, the lower end of the inner diameter of 7.5mm, the cone angle of 60 °. See Figure 2. 5.3 positioning block Made of stainless steel, height 50mm. 5.4 round table Made of stainless steel, round table diameter of 50.8mm. ......

Image

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 56-2012_English be delivered?

Answer: Upon your order, we will start to translate YS/T 56-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 56-2012_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 56-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version YS/T 56-2012?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 56-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.