YS/T 514.7-2009 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 514.7-2009: Methods for chemical analysis of high-titanium slag and rutile. Part 7: Determination of calcium oxide and magnesium oxide content. Flame atomic absorption spectrometry

YS/T 514.7: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 514.7-2009	209	Add to Cart	3 days	Methods for chemical analysis of high-titanium slag and rutile. Part 7: Determination of calcium oxide and magnesium oxide content. Flame atomic absorption spectrometry
YS/T 514.7-2006	199	Add to Cart	2 days	Methods for chemical analysis of high-titanium slag and rutile The gravimetric method for the determination of sillicon dioxide content	Obsolete

Similar standards

GB/T 4698.17   XB/T 619   YS/T 555.11   YS/T 514.1   YS/T 514.2   YS/T 514.10   

Basic data

Standard ID: YS/T 514.7-2009 (YS/T514.7-2009)
Description (Translated English): Methods for chemical analysis of high-titanium slag and rutile. Part 7: Determination of calcium oxide and magnesium oxide content. Flame atomic absorption spectrometry
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H14;D42
Classification of International Standard: 77.120.90
Word Count Estimation: 6,665
Date of Issue: 2009-12-04
Date of Implementation: 2010-06-01
Older Standard (superseded by this standard): YS/T 514.12-2006
Regulation (derived from): MIIT [2009] No. 66
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the high titanium slag and rutile calcium oxide, magnesium oxide content. This standard applies to high titanium slag and rutile calcium oxide, magnesium oxide content. Measuring range: calcium oxide: 0. 10 % ~ 7. 0%, MgO: 0. 020% ~ 8. 0%.

YS/T 514.7-2009: Methods for chemical analysis of high-titanium slag and rutile. Part 7: Determination of calcium oxide and magnesium oxide content. Flame atomic absorption spectrometry

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Methods for chemical analysis of high-titanium slag and rutile.Part 7. Determination of calcium oxide and magnesium oxide content.Flame atomic absorption spectrometry ICS 77.120.90 H14 People's Republic of China Nonferrous Metals Industry Standard Replacing YS/T 514.12-2006 High titanium slag and rutile chemical analysis Part 7. calcium oxide, magnesium oxide content determination Flame Atomic Absorption Spectrometry Posted 2009-12-04 2010-06-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

YS/T 514 "high titanium slag and rutile chemical analysis method" is divided into 10 parts. --- Part 1. Determination of titanium dioxide content of ammonium ferric sulfate titration; --- Part 2. Determination of total iron content of dichromate method; --- Part 3. Determination of sulfur content of high frequency infrared absorption method; --- Part 4. Determination of the amount of silica weighing method, the molybdenum blue spectrophotometric method; --- Part 5. aluminum oxide content - EDTA titration; --- Part 6. Determination of a manganese oxide content by flame atomic absorption spectrometry; --- Part 7. calcium oxide, magnesium oxide content - Flame atomic absorption spectrometry; --- Part 8. Determination of the amount of phosphorus antimony molybdenum blue spectrophotometric method; --- Part 9. calcium oxide, magnesium oxide, manganese oxide, phosphorus, chromium oxide and vanadium pentoxide content - Inductively coupled plasma Daughters emission spectrometry; --- Part 10. Determination of the amount of carbon frequency infrared absorption method. This section YS/T 514 Part 7. The partial replacement of YS/T 514.12-2006 Determination of "high titanium slag and rutile chemical analysis methods and CyDTA EGTA titration of oxygen Calcium and magnesium oxide content. " This portion of YS/T 514.12-2006 compared to the main changes are as follows. --- By flame atomic absorption spectrometry instead of the original titration; --- Sand bath using a platinum crucible plus hydrofluoric acid, perchloric acid dissolved sample; --- Increasing the precision and quality assurance and control provisions. The non-ferrous metal part by the National Standardization Technical Committee and centralized. This section is responsible for drafting unit. Zunyi Titanium Co., Ltd., China Nonferrous Metals Industry Standards and Metrology Institute for Quality. Participated in the drafting of this section. Jinchuan Group Co., Ltd. Fushun Titanium. The main drafters of this section. Luo Lin, Yang Xue new, Qu Wei Xin, Yu Shengjie, Zhuang Jun, Ma Yuping. This part of the standard replaces the previous editions are. --- GB/T 4102.12-1983; --- YS/T 514.12-2006. High titanium slag and rutile chemical analysis Part 7. calcium oxide, magnesium oxide content determination Flame Atomic Absorption Spectrometry

1 Scope

YS/T 514 This part provides high titanium slag, calcium oxide, magnesium oxide content determination of rutile. This section applies to high titanium slag and rutile determination of calcium oxide, magnesium oxide content. Measurement range. calcium oxide. 0.10% to 7.0%; oxide Mg. 0.020% to 8.0%.

2 Method summary

The high titanium slag is placed in a platinum crucible with perchloric acid, hydrofluoric acid is dissolved; rutile dissolved by microwave digestion. The test solution was heated to dissolve after Take strong perchlorate smoke, remove, add hydrochloric acid dissolved salts coolish, adding strontium nitrate masking interfering elements. Atomic absorption spectrophotometer, Wavelength at 422.7nm and 285.2nm, air - acetylene flame measured calcium, magnesium absorbance, thereby calculating the test compound calcium oxide, magnesium oxide Amount.

3 Reagents

Unless otherwise indicated in the analysis using only recognized as analytical grade reagents and distilled or deionized water or equivalent purity. 3.1 perchloric acid (ρ about 1.76g/mL). 3.2 hydrofluoric acid (ρ about 1.15g/mL), pure class distinctions. 3.3 HCl (1 + 1). Nitrate 3.4 (GR). 3.5 strontium nitrate solution (40g/L). Weigh 20g strontium nitrate, dissolved in water and transferred to 500mL volumetric flask, dilute with water to volume, and mix. 3.6 hydrochloric acid (ρ about 1.19g/mL). 3.7 Calcium standard stock solution. Weigh 0.2497g reference reagent calcium carbonate (pre-bake at 105 ℃ after 1h, cooled to room in a desiccator Temperature), placed in 300mL beaker, add 20mL water, was added dropwise hydrochloric acid (3.6) until completely dissolved, and then 10mL excess hydrochloric acid (3.6), boiled to remove Carbon dioxide, after cooling transferred 100mL volumetric flask, dilute to the mark, shake. This solution 1mL containing 1.0mg of calcium. 3.8 Magnesium standard stock solution. Weigh 0.1000g of magnesium (mass fraction ≥99.99%), placed in 300mL beaker, add 20mL hydrochloric acid (3.6) to dissolve. Moved into 1000mL volumetric flask. Dilute with water to volume, and mix. This solution 1mL containing 0.1mg of magnesium. 3.9 Calcium standard solution. Pipette 10.00mL calcium standard stock solution (3.7) in 200mL volumetric flask, dilute with water to volume, and mix. This solution 1mL containing 50μg calcium. 3.10 Magnesium standard solution. Pipette 10.00mL magnesium standard stock solution (3.8) in 100mL volumetric flask, dilute with water to volume, and mix. This solution 1mL containing 10μg magnesium.

4 Instrument

4.1 Atomic absorption spectrometer, with calcium, magnesium hollow cathode lamp. Under optimum working conditions for those who can reach the following indicators can be used. --- Characteristic concentration. a solution in the matrix is consistent with the measured solution, the concentration of Ca features should not exceed 0.30μg/mL; Mg of Characteristic concentration should not exceed 0.02μg/mL. --- Precision. standard solution with the highest concentration of 10 times the absorbance measurements, the standard deviation should not exceed the average absorbance of 1.0%; ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 514.7-2009_English be delivered?

Answer: Upon your order, we will start to translate YS/T 514.7-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 514.7-2009_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 514.7-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version YS/T 514.7-2009?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 514.7-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.