YS/T 349.4-2010 English PDF

US$159.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 349.4-2010: Mothods for chemical analysis of cobalt sulfide concentrate. Part 4: Determination of silicon dioxide. Potassium silicofluoride capacity method
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 349.4-2010	159	Add to Cart	3 days	Mothods for chemical analysis of cobalt sulfide concentrate. Part 4: Determination of silicon dioxide. Potassium silicofluoride capacity method	Valid

Similar standards

YS/T 252.6   GB/T 3884.2   GB/T 3884.1   YS/T 349.2   YS/T 349.3   YS/T 349.1   

Basic data

Standard ID: YS/T 349.4-2010 (YS/T349.4-2010)
Description (Translated English): Mothods for chemical analysis of cobalt sulfide concentrate. Part 4: Determination of silicon dioxide. Potassium silicofluoride capacity method
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H13
Classification of International Standard: 77.120.70
Word Count Estimation: 6,669
Date of Issue: 2010-11-22
Date of Implementation: 2011-03-01
Older Standard (superseded by this standard): YS/T 349-1994
Regulation (derived from): MIIT (2010) No. 126
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the cobalt sulfide concentrates Determination of silica content. This standard applies to cobalt sulfide concentrates Determination of silica content. Measuring range: 1% to 25%.

YS/T 349.4-2010: Mothods for chemical analysis of cobalt sulfide concentrate. Part 4: Determination of silicon dioxide. Potassium silicofluoride capacity method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Mothods for chemical analysis of cobalt sulfide concentrate.Part 4. Determination of silicon dioxide.Potassium silicofluoride capacity method ICS 77.120.70 H13 People's Republic of China Nonferrous Metals Industry Standard Partial replacement of YS/T 349-1994 Cobalt sulfide concentrates - Methods Part 4. Determination of the amount of silica Potassium fluosilicate volumetric method Part 4. Determinationofsilicondioxide- Issued on. 2010-11-22 2011-03-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

YS/T 349 "cobalt sulfide concentrates - the method" is divided into four parts. --- Part 1. Determination of cobalt content potentiometric titration; --- Part 2. Determination of copper content - Flame atomic absorption spectrometry; --- Part 3. Determination of manganese content by flame atomic absorption spectrometry; --- Part 4. Determination of the amount of silica potassium fluosilicate volumetric method. This is Part 4. The partial replacement of YS/T 349-1994 Determination of the amount of the portion of the silicon "matte cobalt concentrate chemical analysis methods", and YS/T 349-1994 phase Ratio, this section there are major changes as follows. --- Measurement range is defined as. 1% to 25%; --- Supplementary terms of quality assurance and control, increasing the precision of the terms. The non-ferrous metal part by the National Standardization Technical Committee and centralized. This section is responsible for drafting Jinchuan Group Limited. This in part by the Beijing General Research Institute of Mining and Metallurgy, Beijing Nonferrous Metal Research Institute participated in the drafting. The main drafters of this section. Zhang Zhi hair, dry Yong, Yang Xiuping, Tian Wei, Lin Hsiu-ying, Gao Ying Jian, Liu. This part of the standard replaces the previous editions are. --- YS/T 394-1994; --- YB825-1975. Cobalt sulfide concentrates - Methods Part 4. Determination of the amount of silica Potassium fluosilicate volumetric method

1 Scope

This section YS/T 349 specifies the method for the determination of silicon dioxide content of cobalt sulfide concentrate. This section applies to the determination of silicon dioxide content of cobalt sulfide concentrate. Measurement range. 1% to 25%.

2 Method summary

Sample by alkali fusion, hot water taken after acidification, in strongly acidic solution was added potassium chloride and potassium fluoride and silicate ions formed potassium fluosilicate precipitation. Fluorine potassium silicate material amount of hydrolysis, precipitation of hydrofluoric acid in hot water with phenolphthalein as indicator, titrated with standard sodium hydroxide solution Titration.

3 Reagents

Unless otherwise specified, the reagents were analytical reagent, which is a distilled water or equivalent purity water. 3.1 potassium hydroxide. 3.2 potassium chloride. Nitrate 3.3 (ρ1.42g/mL). 3.4 KCl wash (50g/L). 3.5 potassium fluoride solution (300g/L). 3.6 phenolphthalein indicator (10g/L). 3.7 Potassium chloride - ethanol solution. Weigh 5g of potassium chloride dissolved in 50mL water, and 50mL ethanol mix. 3.8 standard titration solution of sodium hydroxide (0.1moL/L). Weigh 4g of sodium hydroxide dissolved in pre-boiled cold water until completely dissolved Diluted to 1L. Calibration. Weigh three 0.600g (accurate to 0.0001g) in advance at 100 ℃ ~ 105 ℃ drying 2h potassium hydrogen phthalate (base Quasi reagent), placed in 500mL conical flask, 200mL of carbon dioxide-free water (boiled) was dissolved, was added 5 drops of phenolphthalein indicator (3.6), standard titration with sodium hydroxide solution (3.8) titrate to a reddish color as the end point. Along with the calibration blank test. According to equation (1) calculate the standard volumetric sodium hydroxide solution of silica Titration factor. FS = m1 × 60.08 (V1-V0) × 204.2 (1) Where. FS --- titration factor, and 1.00mL sodium hydroxide standard titration solution rather silica mass in grams per milliliter (G/mL); Mass m1 --- potassium hydrogen phthalate, in grams (g); V1 --- the calibration, titration of potassium hydrogen phthalate solution of sodium hydroxide standard titration solution volume of consumption in milliliters (ML of); ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 349.4-2010_English be delivered?

Answer: Upon your order, we will start to translate YS/T 349.4-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 349.4-2010_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 349.4-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.