YS/T 349.1-2009 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 349.1-2009: Methods for chemical analysis of cobalt sulfide concentrate. Part 1: Determination of cobalt content. Potentiometric titration method
Status: Valid

YS/T 349.1: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 349.1-2009	139	Add to Cart	3 days	Methods for chemical analysis of cobalt sulfide concentrate. Part 1: Determination of cobalt content. Potentiometric titration method	Valid
YS/T 349-1994	399	Add to Cart	3 days	(Methods for chemical analysis of cobalt sulfide concentrates)	Obsolete

Similar standards

YS/T 252.6   GB/T 3884.2   GB/T 3884.1   YS/T 349.2   YS/T 349.4   YS/T 349.3   

Basic data

Standard ID: YS/T 349.1-2009 (YS/T349.1-2009)
Description (Translated English): Methods for chemical analysis of cobalt sulfide concentrate. Part 1: Determination of cobalt content. Potentiometric titration method
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H13
Classification of International Standard: 77.120.70
Word Count Estimation: 5,531
Date of Issue: 2009-12-04
Date of Implementation: 2010-06-01
Older Standard (superseded by this standard): YS/T 349-1994
Regulation (derived from): MIIT [2009] No. 66
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies: Determination of cobalt content cobalt sulfide concentrates. This standard applies to cobalt sulfide concentrates cobalt measured. Measuring range: 4% to 25 %.

YS/T 349.1-2009: Methods for chemical analysis of cobalt sulfide concentrate. Part 1: Determination of cobalt content. Potentiometric titration method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Methods for chemical analysis of cobalt sulfide concentrate.Part 1. Determination of cobalt content.Potentiometric titration method ICS 77.120.70 H13 People's Republic of China Nonferrous Metals Industry Standard Replacing YS/T 349-1994 Cobalt sulfide concentrates - Methods Part 1. Determination of cobalt content Potentiometric titration Posted 2009-12-04 2010-06-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

YS/T 349 "cobalt sulfide concentrates - the method" is divided into four parts. --- Part 1. Determination of cobalt content potentiometric titration; --- Part 2. Determination of copper content - Flame atomic absorption spectrometry; --- Part 3. Determination of manganese content by flame atomic absorption spectrometry; --- Part 4. Determination of the amount of silica potassium fluosilicate volumetric method. This section YS/T Part 1 349. The partial replacement of YS/T 349-1994 Determination of cobalt content portion "matte cobalt concentrate chemical analysis methods", and YS/T 349-1994 phase Ratio, this section there are major changes as follows. --- Measurement range is defined as. 4% to 25%; --- Analysis of the nitroso R salt spectrophotometry to potentiometric titration; --- Supplementary terms of quality assurance and control, increasing the precision of the terms. The non-ferrous metal part by the National Standardization Technical Committee and centralized. This section is responsible for drafting unit. Jinchuan Group Limited. Participated in the drafting of this section. Ningbo Yanmen Chemical Co., Ltd., Ganzhou cobalt tungsten limited liability company. The main drafters of this section. hair Zhang Zhi, Yu Shengjie, Tian Wei, Ma Yuping, Lvqing Cheng, Lin Hsiu-ying, Wang and Shen Feng, Zhang, Wan Jian-hong. This part replaces the previous version of the standard published case. --- YB825-1975; --- YS/T 394-1994. Cobalt sulfide concentrates - Methods Part 1. Determination of cobalt content Potentiometric titration

1 Scope

This section YS/T 349 specifies the method for the determination of cobalt content of cobalt sulfide concentrate. This section applies to the determination of cobalt sulfide concentrate cobalt content. Measurement range. 4% to 25%.

2 Method summary

Samples with hydrochloric acid, nitric acid, perchloric acid decomposition in the presence of a salt of citric acid solution of ammonia, potassium ferricyanide solution of cobalt (Ⅱ) oxide cobalt (Ⅲ), an excess of potassium ferricyanide by potentiometric titration method back titration with cobalt standard titration solution. In a sample of manganese (Ⅱ) coexisting, also iron Potassium cyanide solution quantitative oxidation of manganese (Ⅲ), the measured results for cobalt and manganese combined amount of manganese correction after subtracting the amount of cobalt, is the amount of cobalt. test When samples of manganese content is less than 0.05%, the impact is negligible amount of manganese.

3 Reagents

Unless otherwise specified, the reagents were analytical reagent, which is a distilled water or equivalent purity water. 3.1 ammonium hydrogen fluoride. 3.2 ammonium chloride. 3.3 hydrochloride (ρ1.19g/mL). Nitrate 3.4 (ρ1.42g/mL). 3.5 perchloric acid (ρ1.67g/mL). 3.6 Hydrofluoric acid (ρ1.15g/mL). 3.7 ammonium citrate - ammonia mixed solution. Weigh 50g ammonium citrate dissolved in 500mL water, add ammonia to 1000mL, and mix. 3.8 cobalt standard titration solution. Accurately weigh 1.0000g metal cobalt (≥99.95%) was added 20mL of nitric acid (1 + 1), low dissolved, Washing with water dish and cup wall, moved into 1000mL volumetric flask, constant volume of water. 1mL solution containing 1mg cobalt. 3.9 ferricyanide standard solution (ρ [K3Fe (CN) 6] = 11.2g/L). 3.9.1 preparation. Weigh 11.2g of potassium ferricyanide, adding about 250mL dissolved in water, filtered and diluted with water to 1000mL, shake, stored in a Brown bottle and set aside. 3.9.2 Calibration. Pipette 10.00mL Cobalt Standard Solution (3.8) in the 150mL beaker, 5g of ammonium chloride (3.2), 50mL Ammonium citrate - ammonia mixed solution (3.7), was added 10.00mL ferricyanide accurate standard solution (3.9.1), the automatic potentiometric titrator (4.1), insert the electrode (4.2), stirring, by the end of the potential of the instrument to set the end point of the titration recognition program or set, cobalt standard titration solution Solution (3.8) titration. According to equation (1) calculate the standard solution of potassium ferricyanide titration cobalt standard solution titration factor. K = Vp Vp 1 Vp 2 0+ (1) Where. K --- titration factor ferricyanide standard solution volume consumed per unit volume of the number of standard titration solution of cobalt; V0 --- cobalt Pipette a few ml of the standard solution, in milliliters (mL of); Vp 1 --- retitrate cobalt standard solution milliliters consumed in milliliters (mL); ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 349.1-2009_English be delivered?

Answer: Upon your order, we will start to translate YS/T 349.1-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 349.1-2009_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 349.1-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version YS/T 349.1-2009?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 349.1-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.