YS/T 285-2022 English PDFUS$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. YS/T 285-2022: (Prebaked anodes for aluminum electrolysis) Status: Valid YS/T 285: Historical versions
Basic dataStandard ID: YS/T 285-2022 (YS/T285-2022)Description (Translated English): (Prebaked anodes for aluminum electrolysis) Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended) Classification of Chinese Standard: Q52 Classification of International Standard: 71.100.10 Word Count Estimation: 8,822 Date of Issue: 2022-09-30 Date of Implementation: 2023-04-01 Issuing agency(ies): Ministry of Industry and Information Technology Summary: This standard specifies the grades of prebaked anodes for aluminum electrolysis, and specifies the technical requirements, test methods, inspection rules, packaging, transportation, storage, and purchase order (or contract) content, etc. This standard applies to prebaked anodes for aluminum electrolysis. YS/T 285-2012: Prebaked anode for aluminium electrolysis---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Prebaked anode for aluminium electrolysis ICS 71.100.10 Q52 People's Republic of China Nonferrous Metals Industry Standard Replacing YS/T 285-2007 Prebaked anodes for aluminum electrolysis Issued on. 2012-12-28 2013-06-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. Instead of the standard YS/T 285-2007 "prebaked anodes for aluminum electrolysis." This standard YS/T 285-2007 compared to major changes as follows. --- The grades TY-1 and TY-2 in the apparent density of 1.53g/cm3 and 1.50g/cm3 adjustments were 1.55g/cm3 and 1.52g/cm3. --- The grades TY-2 in the true density of 2.00g/cm3 was adjusted to 2.02g/cm3. --- The grades TY-1 in the compressive strength of 32MPa adjusted to 35MPa, the trademark TY-2 in the compressive strength of 30MPa adjustment To 32MPa. --- The grades TY-1 reactivity in CO2 from 80 percent to 83 percent, the trademark TY-2 reactivity in CO2 adjustment from 70% 73%. --- The grades TY-1 at room temperature resistance rate 55μΩ · m adjusted 57μΩ · m, the trademark TY-2 in rate of resistivity at room temperature 60μΩ · m adjusted 62μΩ · m. --- The grades TY-1 and TY-2 thermal expansion coefficient is 5.0 × 10-6/K and 5.5 × 10-6/K were adjusted to 4.5 × 10-6/K and 5.0 × 10-6/K. --- Increase in flexural strength as a routine analysis indicators. This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized. This standard is drafted by. China Chalco Henan Branch, Shandong Chenyang new carbon materials Co., Ltd., Cable Tong Development Co., Ltd. Participated in the drafting of this standard. CPI Ningxia Qingtongxia Energy Aluminium Company Limited, Guangxi strong Carbon Company Limited Secretary, Jiangsu Su Ling aluminum anode Ltd., Shandong Nanshan Aluminum Co., Ltd. The main drafters of this standard. Lide Kun, Wu Hong should at Azure, including love Chong Luan sea, GAO Shou Lei, pay Singapore, Niu Qing Ren, Zhang Zhiyu, Zhou Qidong, Mazheng Qing, Hao Yongqin, romero, Luo Gaoqiang, Bing, and Zhang Li, Mu Hing. This standard replaces the standards previously issued as follows. --- YS/T 285-1994, YS/T 285-1998, YS/T 285-2007. Prebaked anodes for aluminum electrolysis1 ScopeThis standard specifies the prebaked anodes for aluminum electrolysis requirements, test methods, inspection rules, packaging, transportation, storage and purchase order (or contract) Content. This standard applies to pre-baked anode aluminum electrolysis (hereinafter referred to as prebaked anode).2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 8170 repair value expressed about the rules and limit values and judgment GB/T 26297.3 carbonaceous materials used in aluminum sampling methods - Part 3. prebaked anode Determination of cathode blocks and prebaked anodes room temperature resistivity. YS/T 63.2 aluminum carbon materials testing methods Part 2 YS/T 63.3 aluminum carbon materials testing methods Part 3. Determination of the thermal conductivity of Comparative Law Carbonaceous material used in aluminum 63.4 Part 4 YS/T . Determination of thermal expansion coefficient YS/T 63.7 aluminum Carbonaceous material - Part 7. Determination of apparent density of the size of the law YS/T 63.9 aluminum carbon materials testing methods Part 9. Determination of true density of helium hydrometer method YS/T 63.10 aluminum carbon materials testing methods Part 10. Determination of air permeability YS/T 63.11 aluminum carbon materials testing methods - Part 11. Determination of the reactivity to air mass loss method YS/T 63.12 aluminum carbon materials testing methods Part 12. Determination of the reactivity prebaked anode CO2 mass loss method YS/T 63.14 aluminum carbon materials testing methods Part 14. Determination of flexural strength of three-point method YS/T 63.15 aluminum carbon materials testing methods Part 15. Determination of compressive strength YS/T 63.16 aluminum carbon materials testing methods Part 16. Determination of Trace Elements in X-ray fluorescence spectrometry method YS Carbonaceous material used in Part 19/T 63.19 Aluminum. Determination of ash content YS After calcined petroleum coke detection method Part 9/T 587.9 carbon anode. Determination of true density3 Requirements3.1 Categories Prebaked anode with "TY" label, according to the physical and chemical properties are divided into two grades. TY-1, TY-2. 3.2 Physical and Chemical Properties 3.2.1 prebaked anode of apparent density, true density, compressive strength, CO2 reactivity, flexural strength, room temperature resistivity, thermal expansion coefficient, gray Content of other properties should meet the requirements of Table 1. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 285-2022_English be delivered?Answer: Upon your order, we will start to translate YS/T 285-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of YS/T 285-2022_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 285-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version YS/T 285-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 285-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
