SN/T 3997-2014 English PDF

US$579.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 3997-2014: Methods for sampling and sample preparation of laterite nickel ores in bulk
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 3997-2014	579	Add to Cart	5 days	Methods for sampling and sample preparation of laterite nickel ores in bulk	Valid

Similar standards

YS/T 575.22   YS/T 951   SN/T 3510   SN/T 5687   SN/T 5412   SN/T 5305   

Basic data

Standard ID: SN/T 3997-2014 (SN/T3997-2014)
Description (Translated English): Methods for sampling and sample preparation of laterite nickel ores in bulk
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: D42
Classification of International Standard: 77.120.01
Word Count Estimation: 22,238
Date of Issue: 12/1/2014
Date of Implementation: 5/1/2015
Quoted Standard: GB/T 2007.3; GB/T 2007.4; SN/T 2726-2010
Regulation (derived from): State-Quality-Inspection-accreditation [2014] 614
Issuing agency(ies): General Administration of Customs
Summary: This standard specifies the bulk and preparation of laterite nickel ore quality characteristics of the sample was determined by the basic theory, basic principles, equipment and operating procedures. This standard applies to sampling and sample preparatio

SN/T 3997-2014: Methods for sampling and sample preparation of laterite nickel ores in bulk

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Laterite nickel ore bulk sampling and sample preparation methods) People's Republic of China Entry-Exit Inspection and Quarantine Standards Laterite nickel ore bulk sampling and sample preparation methods Issued on. 2014-11-19 2015-05-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions General Procedure 4 1 General Procedure 4.1 Sampling 1 General Procedure 4.2 Sample Preparation 1 5 basic principles of sampling and sample preparation 2 5.1 The total precision of 2 5.2 parts of sample volume 2 5.3 Quality fluctuations 3 5.4 sampling precision expected to take a minimum number of samples in 3 parts 5.5 parts adopt such methods 4 5.6 Preparation of sample and total precision accuracy 5 5.7 Sample Composition 5 Reduction of sub-rule 6 5.8 5.9 points reduction method 6 With 5.10 points and reuse sample 6 Crushing and grinding 6 5.11 Mixed 6 5.12 5.13 6 pre-drying 5.14 basic requirements for sampling and sample preparation 6 6 device 6 6.1 sampling device 6 6.2 Sample preparation device 7 7 Sampling methods 8 7.1 Sampling from the conveyor belt 8 7.2 Sampling from tank trucks and 8 7.3 from the ship or pile material sample 8 7.4 Sampling from Container 9 8 9 Sample Preparation 8.1 parts combined sample 9 8.2 points reduction method 10 8.3 Sample crushing and grinding 12 8.4 Preparation of the test sample with 13 9 chemical analysis of samples, packaging, labeling and storage 15 9.1 Packaging 15 9.2 identifies 15 9.3 Storage 15 Appendix A (informative) different bipartite Size 16 References 18

Foreword

This standard was drafted according to GB/T 1.1-2009 given rules. Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard was drafted. People's Republic of China Liaoning Province Exit Inspection and Quarantine. The main drafters of this standard. Jiang Xiaoguang, Liu famous Song Chenggang, Jiang Li, Ning Chu, Guocheng Wei, Sheng Xiangjun, Zhang Yanfu, Li Weigang, Lin Zhong, Chen Zhaojun, Chen Yu. Laterite nickel ore bulk sampling and sample preparation methods

1 Scope

This standard specifies the bulk and preparation of laterite nickel ore quality characteristics of the sample was determined by the basic theory, basic principles, equipment and operating program. This standard applies to sampling and sample preparation conveyors, trucks, bins, boats, stockpile, container bags transport of bulk nickel laterite in.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2007.3 minerals in bulk sampling, test methods for sample preparation quality fluctuation General Evaluation GB/T 2007.4 bulk minerals for sampling and sample bias General, Experimental methods for checking the precision SN/T 2726-2010 Test Mineral Terminology

3 Terms and Definitions

Terms and definitions SN/T 2726-2010 defined apply to this document. General Procedure 4 General Procedure 4.1 Sampling Throughout the consignment should be sampled during loading and unloading is carried out, the general procedure is as follows. a) verify that the sample delivery batch or part of the consignment; b) determine the maximum size of the consignment; c) maximum particle size is determined in accordance with the amount of sample parts; d) determining the type of quality fluctuations consignment of parts and the minimum number of samples; e) systematic sampling and stratified sampling to determine what kind of sampling intervals, two sampled for trucks or bins interval; f) to determine the sampling locations and take parts of such methods; g) determining the process of loading and unloading the consignment method has taken almost equal parts by mass of the sample. General Procedure 4.2 Sample preparation Preparation of measuring sample quality characteristics, the general procedure is as follows. a) to determine the subsample or bulk sample method will increment the composition; b) the sample is determined by points or reuse; c) determine the sample preparation process and dividing the selected method; d) determining a sample and dividing, crushing, mixing and pre-drying (if required) and other sample preparation procedures; e) Preparation of the samples according to the sample preparation procedure. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 3997-2014_English be delivered?

Answer: Upon your order, we will start to translate SN/T 3997-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 3997-2014_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 3997-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.