SN/T 3836-2014 English PDFUS$339.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 3836-2014: Risk assessment guideline for the inspection of import used electrical and mechanical products Status: Valid
Basic dataStandard ID: SN/T 3836-2014 (SN/T3836-2014)Description (Translated English): Risk assessment guideline for the inspection of import used electrical and mechanical products Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: K04 Classification of International Standard: 29.020 Word Count Estimation: 13,138 Quoted Standard: GB/T 23694; SN/T 2447.2 Regulation (derived from): AQSIQ notification issued in 2014 on the first batch of 230 industry-standard entry-exit inspection and quarantine Issuing agency(ies): General Administration of Customs Summary: This Standard specifies the principles and procedures for inspection and the risk of various types of imported old mechanical and electrical products for analysis and assessment. This Standard applies to the import of used machinery and electronic product SN/T 3836-2014: Risk assessment guideline for the inspection of import used electrical and mechanical products---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Risk assessment guideline for the inspection of import used electrical and mechanical products People's Republic of China Entry-Exit Inspection and Quarantine Standards Import of used mechanical and electrical products test risk assessment methodology guide Issued on. 2014-01-13 2014-08-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released Foreword"The import of used mechanical and electrical products test risk assessment methodology guide" is a standard system of inspection and quarantine of the third layer (mechanical and electrical test Standard System The second layer) --- General category. This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard was drafted. People's Republic of China Jiangsu Entry-Exit Inspection and Quarantine Bureau, Shenzhen People's Republic of China Entry-Exit Inspection and Quarantine Bureau, People's Republic of China Hebei Exit Inspection and Quarantine. The main drafters of this standard. Hanzhen Rong, Zhou Yongchang, Tang and red, Luquan Long, Xu Beibei, Xu Qin, Li Yujing. Import of used mechanical and electrical products test risk assessment methodology guide1 ScopeThis standard specifies the principles and procedures to test the risk of various types of imported old mechanical and electrical products for analysis and assessment. This standard applies to the import of used mechanical and electrical products inspection risk assessment, provide the basis for information and related risk management activities. NOTE. In drafting this standard is assumed by a person suitably qualified and experienced use this guide.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 23694 risk management terminology SN/T 2447.2 General requirements for the import and export of electromechanical products testing - Part 2. Risk Assessment3 Terms and DefinitionsGB/T 23694 and SN/T 2447.2 and established the following terms and definitions apply to this document. 3.1 Old electromechanical products usedelectricalandmechanicalproducts Old electromechanical products which are consistent with one of the following conditions. --- Have been used (without the use of pre-testing, debugging equipment), still have the basic functions and certain use value; --- Unused, but exceed the quality guarantee period (non-warranty period); --- Unused, but long time storage, components produce significant tangible loss; --- Mix of old and new member; --- Refurbished. 3.2 Risk risk The possibility of import of used machinery and electronic products inspection and supervision activities affect product safety, health, environmental protection, anti-fraud and other events and Combination consequences. It should be considered relevant laws and regulations, social, economic and environmental factors. Note. Adapted from GB/T 23694-2009, the definition of 3.1.1. 3.3 Risk management riskmanagement Risk identification, analysis, evaluation, exchange, processing, monitoring and assessment, in order to adjust the system process risk, usually by the decision-making bodies get on. 3.4 Risk analysis riskanalysis On the import of used machinery and electronic products during the inspection of risk identification, description and estimation process. 3.5 Risk identification riskidentification Discovery, enumeration and description of the process of risk. In most cases, risk identification is based on historical experience and activities at the same time depends on ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 3836-2014_English be delivered?Answer: Upon your order, we will start to translate SN/T 3836-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 3836-2014_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 3836-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
