SN/T 2949-2011 English PDFUS$239.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 2949-2011: Determination of SiO2, Fe2O3, Al2O3, CaO, MgO contents in talc for export. X-ray fluorescence spectrometric method Status: Valid
Basic dataStandard ID: SN/T 2949-2011 (SN/T2949-2011)Description (Translated English): Determination of SiO2, Fe2O3, Al2O3, CaO, MgO contents in talc for export. X-ray fluorescence spectrometric method Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: D50 Classification of International Standard: 73.080 Word Count Estimation: 9,934 Date of Issue: 2011-05-31 Date of Implementation: 2011-12-01 Quoted Standard: GB/T 6682; GB/T 15341; GB/T 15342; GB/T 15343; GB/T 16597 Regulation (derived from): National-Quality-Inspection-accreditation (2011) 291 Issuing agency(ies): General Administration of Customs Summary: This standard specifies the X -ray fluorescence spectrometry determination of silica, talc, ferric oxide, aluminum oxide, calcium oxide, magnesium content approach. This standard applies to silica, talc, ferric oxide, aluminum oxide, calcium oxide, determination of magnesium oxide content. Measuring range of the elements listed in Table 1. SN/T 2949-2011: Determination of SiO2, Fe2O3, Al2O3, CaO, MgO contents in talc for export. X-ray fluorescence spectrometric method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Determination of SiO2, Fe2O3, Al2O3, CaO, MgO contents in talc for export.X-ray fluorescence spectrometric method People's Republic of China Entry-Exit Inspection and Quarantine Standards Export talc silica, iron oxide, ozone Determination of aluminum oxide, calcium oxide, magnesium oxide X-ray fluorescence spectrometry DeterminationofSiO2, Fe2O3, Al2O3, CaO, MgOcontentsintalcforexport- Issued on. 2011-05-31 2011-12-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released ForewordThis standard is prepared in accordance with GB/T 1.1-2009 given rules. This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard was drafted. People's Republic of China Liaoning Province Exit Inspection and Quarantine. The main drafters of this standard. Huang Daliang, of Interferon Chen Yang, Cui Yan, Shen Bao true, Tian Zhuo, Guo Yu, Choi Han, Chen Xi, Chang Chun Ouyang. This standard is the first release of the entry-exit inspection and quarantine industry standards. Export talc silica, iron oxide, ozone Determination of aluminum oxide, calcium oxide, magnesium oxide X-ray fluorescence spectrometry1 ScopeThis standard specifies the X-ray Fluorescence Spectrometry silica, talc, ferric oxide, aluminum oxide, calcium oxide, Magnesium content approach. This standard applies to silica, talc, ferric oxide determination, aluminum oxide, calcium oxide, magnesium oxide content of each element determination Range in Table 1. Table 1 standard measurement range of each substance Element measurement range (mass fraction) /% SiO2 48.00 ~ 60.00 Fe2O3 0.30 ~ 3.00 Al2O3 0.10 ~ 10.00 CaO 1.00 ~ 5.00 MgO 30.00 ~ 39.002 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. Laboratory use specifications and test methods GB/T 6682 Analysis GB/T 15341 talc GB/T 15342 Talc GB/T 15343 talc chemical analysis GB/T 16597 metallurgical product analysis X-ray Fluorescence Spectrometry General3 PRINCIPLE OF THE METHODUse of anhydrous lithium tetraborate melt like, potassium iodide is made from film sample sheet. Measured analyte spectral characteristics of X-ray fluorescence intensity Degrees, according to the relationship between the content of X-ray fluorescence intensity and analyte to be tested between the elements, the choice of regression equations and mathematical calibration models, namely, Calculated content measured elements.4 Reagents and materials4.1 The water test should be consistent with GB/T 6682 requirements in three of water. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 2949-2011_English be delivered?Answer: Upon your order, we will start to translate SN/T 2949-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 2949-2011_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 2949-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |