SN/T 2737-2010 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 2737-2010: Determination of low aluminum content in ferroalloy. The oxygen-rich flame atomic absorption spectrometry
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 2737-2010	209	Add to Cart	3 days	Determination of low aluminum content in ferroalloy. The oxygen-rich flame atomic absorption spectrometry	Valid

Similar standards

GB/T 3654.3   GB/T 4336   GB/T 4701.1   SN/T 5570   SN/T 4757   SN/T 4308   

Basic data

Standard ID: SN/T 2737-2010 (SN/T2737-2010)
Description (Translated English): Determination of low aluminum content in ferroalloy. The oxygen-rich flame atomic absorption spectrometry
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: H11
Classification of International Standard: 77.100
Word Count Estimation: 8,811
Date of Issue: 2010-11-01
Date of Implementation: 2011-05-01
Quoted Standard: GB/T 4010; GB/T 6682
Regulation (derived from): National Quality Inspection (2010) 582
Issuing agency(ies): General Administration of Customs
Summary: This standard specifies the content of aluminum alloy in low oxygen flame atomic absorption spectrometric method. This standard applies to low alloy aluminum content, measurement range (mass fraction): 0. 01% to 0. 10%.

SN/T 2737-2010: Determination of low aluminum content in ferroalloy. The oxygen-rich flame atomic absorption spectrometry

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Determination of low aluminum content in ferroalloy.The oxygen-rich flame atomic absorption spectrometry People's Republic of China Entry-Exit Inspection and Quarantine Standards Determination of low aluminum content in ferroalloys Enriched by Flame Atomic Absorption Spectrometry Issued on. 2010-11-01 2011-05-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard was drafted. People's Republic of China Ningxia Exit Inspection and Quarantine. The main drafters of this standard. Huang Guangze, Cheung Pui Hong, Huang Xiangyu, Sun Pubing, Cao Yingjie, Falls Apart. This standard is the first release of the entry-exit inspection and quarantine industry standards.

Introduction

With the development of foreign trade, ferroalloy products from high consumption of low-quality low-power steering high value-added products, domestic high-tech iron Alloy growing product categories, low aluminum content of the alloy class are the main products, especially the aluminum content of less than 0.1% (0.01% to 0.1%) analytical standards difficult to find, upon inquiry, at home and abroad is currently no standard detection methods such Content. Western Region China is currently one of the main origin of ferroalloy export trade due to the content of the parties involved in controversial issues have occurred, on behalf of other ways For cause significant errors. In addition, according to the level of domestic production enterprises instrumentation and related testing organizations, not more expensive imported equipment Popularize, but most equipment companies and testing organizations able to apply this standard is applied, the standard upon the promotion and application in the development of production And import and export trade plays a very important role. Therefore, in order to adapt to the development of foreign trade and domestic ferroalloy production needs, The development of this standard can be solved as soon as possible a low aluminum content ferroalloy product testing standards no problem. Determination of low aluminum content in ferroalloys Enriched by Flame Atomic Absorption Spectrometry

1 Scope

This standard specifies low alloy aluminum content of oxygen-enriched flame atomic absorption spectrometric method. This standard applies to the determination of low-alloy aluminum content measurement range (mass fraction). 0.01% to 0.10%.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 4010 alloy chemical analysis and preparation of samples Laboratory use specifications and test methods GB/T 6682 Analysis

3 Method summary

Samples with nitric acid, hydrofluoric acid, perchloric acid was dissolved, and evaporated to dryness smoke perchlorate, dissolved salts with hydrochloric acid, and the solution intake air - ethynyl - Oxygen flame, the aluminum hollow cathode lamp as the light source at 309.3nm place, with oxygen enrichment means using atomic absorption determination of aluminum content.

4 Reagents and materials

Unless otherwise specified, the reagents were of analytical grade, water, deionized water (in line with GB/T 6682 stipulated two of water). 4.1 nitric acid (ρ = 1.42g/mL). 4.2 Hydrofluoric acid (ρ = 1.15g/mL). 4.3 perchloric acid (ρ = 1.68g/mL). 4.4 hydrochloric acid (ρ = 1.19g/mL). 4.5 HCl. hydrochloric acid solution 11. 1 volume hydrochloric acid plus one volume of water. 4.6 Ascorbic acid (20g/L). the time is now equipped with. 4.7 sulfosalicylic acid, potassium chloride mixture. Weigh Sulfosalicyl add 10g potassium chloride 0.5g, diluted with water to 100mL. 4.8 aluminum standard solution (0.1mg/mL). Weigh accurately 0.1000g pure aluminum (99.99%) were placed in 50mL beaker, 15mL hydrochloric acid (4.5) dissolved and transferred to 100mL volumetric flask, and mix. This solution was an aluminum concentration of 1mg/mL. Pipette 10mL standard solution to the above 100mL volumetric flask, dilute to 100mL, and mix. This solution was an aluminum concentration of 0.1mg/mL. 4.9 high purity oxygen. 99.99%. 4.10 acetylene gas. 99.99%.

5 Equipment

5.1 Atomic absorption spectrometer. shall be equipped with an acetylene - air - oxygen enrichment device, or the completion of this test atomic absorption spectrometer must reach Measurement range of technical and performance requirements. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 2737-2010_English be delivered?

Answer: Upon your order, we will start to translate SN/T 2737-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 2737-2010_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 2737-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.