SN/T 2718-2010 English PDFUS$259.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 2718-2010: Determination of chemical composition in stainless steel. Inductively coupled plasma atomic emission spectrometric method Status: Valid
Basic dataStandard ID: SN/T 2718-2010 (SN/T2718-2010)Description (Translated English): Determination of chemical composition in stainless steel. Inductively coupled plasma atomic emission spectrometric method Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: H11 Classification of International Standard: 77.040.30 Word Count Estimation: 10,186 Date of Issue: 2010-11-01 Date of Implementation: 2011-05-01 Quoted Standard: GB/T 6682; JJG 015 Regulation (derived from): National Quality Inspection (2010) 582 Issuing agency(ies): General Administration of Customs Summary: This standard specifies the inductively coupled plasma atomic emission spectroscopy in the body Determination stainless steel silicon, manganese, phosphorus, chromium, nickel, copper, thorium, molybdenum, vanadium. Tungsten, aluminum elements. This standard applies to chromium stainless steel, chrome-nickel stainless steel and chrome-manganese (Mn) stainless steel silicon, manganese, phosphorus, chromium, nickel, copper, thorium, molybdenum, vanadium, tungsten, aluminum element content. Measuring range in Table 1. This standard specifies the aluminum, silicon dissolved aluminum, acid-soluble silicon. SN/T 2718-2010: Determination of chemical composition in stainless steel. Inductively coupled plasma atomic emission spectrometric method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Determination of chemical composition in stainless steel.Inductively coupled plasma atomic emission spectrometric method People's Republic of China Entry-Exit Inspection and Quarantine Standards Determination of the chemical composition of stainless steel by inductively coupled Plasma atomic emission spectrometry Issued on. 2010-11-01 2011-05-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard was drafted. People's Republic of China Shandong CIQ. The main drafters of this standard. Li Yan Qiu, Maocheng Tao, Wang Yanting, hair Cai, Chen Shan, Qi Jialin, Xu Ming. This standard is the first release of the entry-exit inspection and quarantine industry standards. Determination of the chemical composition of stainless steel by inductively coupled Plasma atomic emission spectrometry1 ScopeThis standard specifies the inductively coupled plasma atomic emission spectrometry stainless steel silicon, manganese, phosphorus, chromium, nickel, copper, titanium, molybdenum, vanadium, tungsten, The method of aluminum elements. This standard applies to chromium stainless steel, chrome-nickel stainless steel and Cr-Mn (manganese) stainless steel silicon, manganese, phosphorus, chromium, nickel, copper, titanium, molybdenum, vanadium, tungsten, aluminum Determination of element content. Determination of the range in Table 1. This standard specifies aluminum, silicon Als, soluble silicon. Table 1 Determination of elements content range Elements in the range of (mass fraction) /% Si 0.02 ~ 5.00 Mn 0.03 ~ 12.50 P 0.04 ~ 0.25 Cr 4.00 ~ 25.00 Ni 3.00 ~ 20.00 Cu 0.01 ~ 5.00 Ti 0.01 ~ 2.35 Mo 0.02 ~ 4.00 V 0.03 ~ 0.60 Al 0.04 ~ 1.50 W 0.01 ~ 1.002 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 6682 analytical laboratory use specifications and test methods JJG015 inductively coupled plasma atomic emission spectrometer verification procedures3 Method summarySamples with nitric acid - hydrochloric acid dissolved and diluted to determine the volume of the sample solution is injected into the plasma flame, and this light source, waiting Plasma spectrometer at a wavelength corresponding to the elements, the light intensity measured to determine its content from the standard curve.4 Reagents and materialsUnless otherwise indicated in the analysis using only recognized as analytical reagents and GB/T 6682 provisions of secondary water. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 2718-2010_English be delivered?Answer: Upon your order, we will start to translate SN/T 2718-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 2718-2010_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 2718-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
