SN/T 2438.2-2010 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 2438.2-2010	639	Add to Cart	5 days	Import and Export Toy Inspection procedures - Part 2: bamboo toys	Obsolete

Similar standards

GB 6675.2   GB 6675.3   GB 6675.1   SN/T 5635   SN/T 5316   SN/T 2438   

Basic data

Standard ID: SN/T 2438.2-2010 (SN/T2438.2-2010)
Description (Translated English): Import and Export Toy Inspection procedures - Part 2: bamboo toys
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: Y57
Classification of International Standard: 97.200.50
Word Count Estimation: 16,115
Date of Issue: 2010-03-02
Date of Implementation: 2010-09-16
Older Standard (superseded by this standard): SN/T 0734.2-1997
Quoted Standard: GB/T 2828.1; GB 5296.5; GB 6675-2003; SN/T 2791.2; ASTM F963-2008; EN 71-1-2005 + A6-2008; EN 71-3-1994 + A1-2000 + AC-2002
Regulation (derived from): National Quality Inspection (2010) 98
Issuing agency(ies): General Administration of Customs
Summary: This standard specifies the import and export of bamboo toys sampling, testing and test results to determine the rules. This standard applies to wood, bamboo wood as the main raw material import and export of toys tested.

SN/T 2438.2-2010: Import and Export Toy Inspection procedures - Part 2: bamboo toys

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Import and Export Toy Inspection procedures - Part 2. bamboo toys People's Republic of China Entry-Exit Inspection and Quarantine Standards Instead of the SN/T 0734.2-1997 Import and Export Toy Inspection procedures Part 2. Wood Toys Part 2. Bambooandwoodentoys Issued on. 2010-03-02 2010-09-16 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released

Foreword

SN/T 2438 "Import and Export Toy Inspection Regulations" is divided into six sections. --- Part 1. Weight bearing children toys; --- Part 2. bamboo toys; --- Part 3. Electric toys; --- Part 4. Soft-filled toys, make clothing; --- Part 5. mechanical toys; --- Part 6. plastic toys. This section SN/T 2438 Part 2. This section drafted in accordance with GB/T 1.1-2009 given rules. The partial replacement of SN/T 0734.2-1997 "export wooden toys for the inspection." This section compared with the SN/T 0734.2-1997, mainly amended as follows. --- According to the latest US, Europe and China's toy safety standards for toy safety inspection program has been revised. --- Added "Appendix A special requirements for data export wood toys" that "specific hazardous substances and the corresponding finger Order limits and testing standards. " This section proposed and managed by the National Certification and Accreditation Administration Committee. This section was drafted by. People's Republic of China Jiangsu Entry-Exit Inspection and Quarantine Bureau, People's Republic of China Zhejiang Entry-Exit Inspection and Quarantine Bureau. The main drafters of this section. xin Liu, Peng Yue Yang, Xu off the sea. This part of the standard replaces the previous editions are. --- SN/T 0734.2-1997. Import and Export Toy Inspection procedures Part 2. Wood Toys

1 Scope

This section GB/T 2438 specifies the rules for the determination of sampling, testing and test results of the import and export of wood toys. This section applies to wood, bamboo wood as the main raw material import and export toys testing.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan (ISO 2859-1.1999, IDT) GB 5296.5 consumer use - Part 5. Toys GB 6675-2003 National Safety Technical Code for Toys SN/T 2791.2 Import and Export Toy Inspection General technical requirements - Part 2. Safety requirements for electrical performance ASTMF963-08 Toy Safety EN71-1.2005 A6.2008 Toy Safety mechanical and physical properties EN71-3.1994 A1.2000 AC.2002 Safety of toys Migration of certain elements

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Unit product unitproduct For the implementation of sampling and divided into the basic unit (or units only). 3.2 Submit Batch submittedlot For the implementation of import and export inspection brings together a group of toys. Toys batch can contain a variety of specifications, it belongs to the same foreign trade contracts and at the same time Between export. Submit a batch by one or more inspection lots constitution. 3.3 Inspection Lot inspectionbatch To carry out the inspection pooled together a group of toys. Batch of toys for the same size and type, of the same foreign trade contracts, in the same production conditions Continuous feed production, the quality requirements of the same product collection. Acronym batch. 3.4 Batch number batchfigure The number included in each test batch. ......

Image