| SN/T 1932.2-2008 English PDF
 Basic dataStandard ID: SN/T 1932.2-2008 (SN/T1932.2-2008)Description (Translated English): Import and export of garment inspection procedures - Part 2: Sampling Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: Y76 Classification of International Standard: 61.020 Word Count Estimation: 8,827 Date of Issue: 2008-04-29 Date of Implementation: 2008-11-01 Older Standard (superseded by this standard): SN/T 0553-1996 Quoted Standard: GB/T 2828.1; SN/T 1932.1 Regulation (derived from): Industry standard filing Notice 2008 No. 7 Issuing agency(ies): General Administration of Customs Summary: This standard specifies the import and export of garment appearance and internal quality inspection sampling plans, sampling methods, the determination and the transfer rules and other technical characteristics. This standard applies to export apparel appearance and internal quality of the test sample. SN/T 1932.2-2008: Import and export of garment inspection procedures - Part 2: Sampling---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Import and export of garment inspection procedures - Part 2. Sampling Exit inspection and quarantine industry standard book People's Republic of China Instead of the SN/T 0553-1996 Clothing import and export inspection procedures Part 2. Sampling Posted 2008-04-29 2008-11-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released ForewordSN/T 1932 "for the inspection of import and export clothing" is divided into nine sections. --- Part 1. General; --- Part 2. Sampling; --- Part 3. indoor clothing; --- Part 4. denim clothing; --- Part 5. suits, coats; --- Part 6. down clothing and feather products; --- Part 7. shirt; --- Part 8. children's clothing; --- Part 9. casual. This section SN/T 1932 Part 2. The partial replacement of SN/T 0553-1996 "garment export inspection and sampling method." This section compared with the SN/T 0553-1996 The main changes are as follows. --- Revised standard exterior sampling plan; --- Increases for imported clothing and apparel market purchases for export sampling; --- Increasing the intrinsic quality of the sampling method. Appendix A of this section is an informative annex. This section proposed and managed by the National Certification and Accreditation Administration Committee. This section was drafted by. People's Republic of China Shandong CIQ. The main drafters of this section. Li Li, clothing Yufeng, Guo Chao Hung, Liu Yun. This part of the standard replaces the previous editions are. --- SN/T 0553-1996; --- ZBY75020-1990. Clothing import and export inspection procedures Part 2. Sampling1 ScopeSN/T 1932 provisions of this part of the internal and export garment appearance quality inspection sampling plan and sampling methods, determination and transfer regulations The other technical characteristics. This section applies to the import and export of clothing and appearance of the intrinsic quality of the test sample.2 Normative referencesThe following documents contain provisions which, through reference SN/T 1932 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan (GB/T 2828.1-2003, ISO 2859-1.1999, IDT) SN/T 1932.1 inspection of import and export clothing - Part 1. General3 Terms and DefinitionsGB/T 2828.1 and established the following terms and definitions apply to SN/T 1932 to the present section. 3.1 Non-technological requirements that appear on the sewing unit product bad, bad ironing, stains, holes, specifications and other serious discrepancies affect the overall appearance and wear A defect performance. 3.2 Non-poor sewing technology requirements appear on unit product, thread, and other minor contamination affect the overall appearance and wear performance defects. 3.3 Per unit of product has a defect and above Class A, Class B may also contain defects. 3.4 Per unit of product, there is a class B and above defects, excluding Class A defects. 3.5 When a continuous series of batches submitted for acceptance sampling, process the worst allowable average quality level. 3.6 To grant qualified to determine the maximum number of defective samples allowed. 3.7 Fail decision to grant a minimum number of nonconforming items permitted in the sample. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 1932.2-2008_English be delivered?Answer: Upon your order, we will start to translate SN/T 1932.2-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 1932.2-2008_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 1932.2-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |