SN/T 1888.13-2007 English PDF

US$179.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 1888.13-2007: Hygienic standard for export and import irradiated food containers and packaging materials. Part 13: Products of polyethylene terephthaalate
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 1888.13-2007	179	Add to Cart	2 days	Hygienic standard for export and import irradiated food containers and packaging materials. Part 13: Products of polyethylene terephthaalate	Valid

Similar standards

NY/T 939   NY/T 2334   SN/T 2051   SN/T 5650   SN/T 5601   SN/T 1889.5   

Basic data

Standard ID: SN/T 1888.13-2007 (SN/T1888.13-2007)
Description (Translated English): Hygienic standard for export and import irradiated food containers and packaging materials. Part 13: Products of polyethylene terephthaalate
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: X04
Classification of International Standard: 67.250
Word Count Estimation: 5,524
Date of Issue: 2007-08-06
Date of Implementation: 2008-03-01
Quoted Standard: GB/T 5009.60; GB/T 5009.101; GB 9685; GB/T 18524
Regulation (derived from): National-accreditation-Science [2011] 63
Issuing agency(ies): General Administration of Customs
Summary: This standard specifies the import and export of irradiated food packaging containers and packaging materials polyethylene terephthalate molded sanitary requirements and test methods. This standard applies to food packaging using polyethylene terephthalate resin as raw material, by injection, pulling, blowing into the legal system of containers and films, can be used to hold beverages, food seasonings, edible oils and fats as well as a composite food packaging bags of composite materials.

SN/T 1888.13-2007: Hygienic standard for export and import irradiated food containers and packaging materials. Part 13: Products of polyethylene terephthaalate

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Hygienic standard for export and import irradiated food containers and packaging materials.Part 13. Products of polyethylene terephthaalate Exit inspection and quarantine industry standard book People's Republic of China Import and export containers and packaging materials irradiated food hygiene standards Part 13. polyethylene terephthalate molded article Posted 2007-08-06 2008-03-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released

Foreword

SN/T 1888 "Importers irradiated food packaging containers and materials hygiene standards" is divided into 13 parts. --- Part 1. polypropylene resin; --- Part 2. polypropylene molded article; --- Part 3. Nylon molded article; --- Part 4. polyethylene products; --- Part 5. PVC moldings; --- Part 6. polystyrene resin; --- Part 7. polystyrene products; --- Part 8. vinylidene chloride - vinyl chloride copolymer resin; --- Part 9. polyvinyl chloride resin; --- Part 10. Polycarbonate resin; --- Part 11. polyethylene terephthalate resin; --- Part 12. glass products; --- Part 13. polyethylene terephthalate molded article. This section SN/T 1888 Part 13. This section proposed and managed by the National Certification and Accreditation Administration Committee. This section is drafted. Tianjin People's Republic of China Exit Inspection and Quarantine. The main drafters of this section. Wangli Bing, Tian shade, Li Jing, Zhang Lan Jun, Ma Jun, Xu Bin. This section first release of exit inspection and quarantine industry standards. Import and export containers and packaging materials irradiated food hygiene standards Part 13. polyethylene terephthalate molded article

1 Scope

SN/T 1888 provisions of this part of the import and export of irradiated food containers and packaging materials used polyethylene terephthalate molded article Health requirements and test methods. This section applies to food packaging polyethylene terephthalate resin as raw materials, injection stretch blow into the legal container and thin Film, can be used to hold beverages, food seasonings, edible oils and fats as well as a composite food packaging bags composite.

2 Normative references

The following documents contain provisions which, through reference SN/T 1888 this section, constitute provisions of this part. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 5009.60 food packaging, polyethylene, polystyrene, polypropylene moldings health standard analytical methods of GB/T 5009.101 food containers and packaging materials in polyester resin and molded article was measured antimony GB 9685 food containers and packaging materials additives health standards GB/T 18524 General requirements for food irradiation

3 Terms and Definitions

The following terms and definitions apply to SN/T 1888 of this section. 3.1 In order to achieve some practical purpose, according to the irradiation process specification requirements, after a certain dose of ionizing radiation irradiated food. 3.2 Any ionizing radiation, the average energy per unit mass of the grant, the unit name Ge (Switzerland), symbol Gy, 1Gy = 1J/kg, 1kGy table 1000J shown 1kg material to absorb energy. 4. Technical Requirements 4.1 Requirements for raw materials Where the irradiation of polyethylene terephthalate molded article in the production and quality before irradiation should be consistent with the corresponding food packaging companies Wei Health and hygiene norms and the relevant national standards. Feed additives used should meet the requirements of GB 9685. 4.2 Limitations and irradiation dose requirements 4.2.1 dose limit Polyethylene terephthalate moldings energy by 60Co or 137Csγ rays or electron accelerator is less than the electrical 10MeV Beam irradiation, the overall average absorbed dose shall not exceed 60kGy. 4.2.2 Requirements irradiation Uniform irradiation, the dose accurately, the average absorbed dose distribution unevenness ≤1.5. Unevenness in accordance with Test Method GB/T 18524 in. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 1888.13-2007_English be delivered?

Answer: Upon your order, we will start to translate SN/T 1888.13-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 1888.13-2007_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 1888.13-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.