SN/T 1794.2-2015 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 1794.2-2015	359	Add to Cart	3 days	Rules for inspection of electrical accessories for import and export - Part 2: Cord sets and interconnection cord sets	Obsolete
SN/T 1794.2-2006	359	Add to Cart	3 days	Import and export of electrical accessories inspection procedures - Part 2: wire components	Obsolete

Similar standards

GB/T 2099.3   GB/T 2099.1   GB 2099.2   SN/T 1431.6   SN/T 3020.1   SN/T 1431.1   

Basic data

Standard ID: SN/T 1794.2-2015 (SN/T1794.2-2015)
Description (Translated English): Rules for inspection of electrical accessories for import and export - Part 2: Cord sets and interconnection cord sets
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: K30
Classification of International Standard: 29.060.10
Word Count Estimation: 9,941
Date of Issue: 2015-02-09
Date of Implementation: 2015-09-01
Older Standard (superseded by this standard): SN/T 1794.2-2006
Regulation (derived from): State-Quality-Inspection-Accreditation [2015] 59
Issuing agency(ies): General Administration of Customs

SN/T 1794.2-2006: Import and export of electrical accessories inspection procedures - Part 2: wire components

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Import and export of electrical accessories inspection procedures - Part 2. wire components Book of the People's Republic of China Entry and Exit Inspection and Quarantine Import and export electrical accessories inspection procedures Part 2. Wire assemblies Released on.2006-08-28 2007-03-01 implementation People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued

Foreword

SN/T 1794 "Inspection Procedures for Import and Export Electrical Appliances Accessories" consists of several parts, and its expected structure is. --- Part 1. General requirements; --- Part 2. Wire assemblies; This part is the second part of SN/T 1794. This part is proposed and managed by the National Certification and Accreditation Administration. This section drafted by. Shenzhen Entry-Exit Inspection and Quarantine Bureau. The main drafters of this section. Zhong Yong, Chen Hongzhong, Wang Yusen. This section is the first published industry standard for entry-exit inspection and quarantine.

Introduction

The "Import and Export Electrical Appliances Inspection Procedures" is the basis for the inspection of import and export electrical accessories, and refers to the inspection of import and export electrical accessories. Guidance and normative role. With the revision of China's accession to the World Trade Organization (WTO) and the "Commodity Inspection Law," the import and export commodity inspection work model has undergone great changes. In order to adapt to the changes in the situation, the national inspection and quarantine authorities have established a system of inspection and quarantine standards. This part belongs to the fourth layer of the inspection and quarantine standard system---personality standard, which stipulates the requirements for inspection of import and export wire assemblies. Import and export electrical accessories inspection procedures Part 2. Wire assemblies

1 Scope

This section specifies the requirements for wire assemblies for household and similar general equipment. This section does not apply to industrial wire assemblies (ie with industrial plugs and connections in accordance with GB/T 11918 and GB/T 11919) The wire assembly of the device does not apply to extended wire assemblies.

2 Normative references

The terms in the following documents become the provisions of this part by reference to this part of SN/T 1794. Quotations with dated , all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved under this section The latest versions of these documents are available for study by parties to the agreement. For undated references, the latest edition applies to this section. GB/T 2828.1. Sampling and sampling procedures - Part 1 . Batch-to-batch sampling plan searched by the acceptance quality limit (AQL) (GB/T 2828.1-2003, ISO 2859-1..1999, IDT) GB 15934-1996 wire assembly (idt IEC 60799. 1984) GB 17465.1-1998 Appliance couplers for household and similar purposes Part 1. General requirements (eqv IEC 60320-1. 1994) Basic requirements for the preparation of SN/T 0002 import and export electromechanical commodity inspection procedures

3 Terms and definitions

GB/T 2828.1, GB 15934-1996, SN/T 0002 established and the following terms and definitions apply to this section. 3.1 A wire assembly is a component consisting of a flexible cable or cord with a non-rewirable plug and a non-rewirable connector. The device or device is connected to the power source. Note. “non-rewirable plug” and “non-rewirable connector” means that the manufacturer has assembled the cord with the plug or connector as a whole without permanent. A plug or connector that cannot be removed without damage and cannot be removed by hand or by a general tool such as a screw driver. The difference between a wire assembly and an extension cord assembly is that the latter has a removable socket without a connector and does not directly interface the appliance or device with Power connection. 3.2 According to the mandatory requirements of the national technical specifications, the type test shall be carried out according to the prescribed period, and the products shall be subjected to batch inspection according to the on-site inspection regulations. Inspection and implementation of the conformity assessment activities of the company's quality management system. 3.3 According to the mandatory requirements of the national technical specifications, the import and export commodities shall be subject to the conformity assessment activities of sampling, inspection and inspection batch by batch or batch. 3.4 The same specifications, models, and unit products produced under the same production conditions for the purpose of inspection are referred to as batches. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 1794.2-2015_English be delivered?

Answer: Upon your order, we will start to translate SN/T 1794.2-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 1794.2-2015_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 1794.2-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version SN/T 1794.2-2015?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 1794.2-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.