SN/T 1733.9-2006 English PDFUS$229.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 1733.9-2006: Rules for the inspection of non-prime steel material. Part 9: Zinc-coated steel sheets and coils Status: Valid
Basic dataStandard ID: SN/T 1733.9-2006 (SN/T1733.9-2006)Description (Translated English): Rules for the inspection of non-prime steel material. Part 9: Zinc-coated steel sheets and coils Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: H40 Classification of International Standard: 77.140 Word Count Estimation: 7,747 Date of Issue: 2006-08-28 Date of Implementation: 2007-03-01 Quoted Standard: GB/T 2518; GB/T 15675 Issuing agency(ies): General Administration of Customs Summary: This standard specifies the galvanized steel sheet and strip of non-genuine definition of technical requirements, inspection and appraisal rules and test results to determine. This section relates to galvanized steel sheet and strip, including hot- dip galvanized and electro-galvanized steel sheet and strip. This standard applies to non-genuine galvanized steel sheet and strip, and a residual products such as galvanized steel sheet and strip inspection and appraisal. This section also applies to non-genuine aluminum and galvanized aluminum sheet and plate inspection and appraisal. SN/T 1733.9-2006: Rules for the inspection of non-prime steel material. Part 9: Zinc-coated steel sheets and coils---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Rules for the inspection of non-prime steel material.Part 9. Zinc-coated steel sheets and coils Book of the People's Republic of China Entry and Exit Inspection and Quarantine Non-genuine steel inspection and identification procedures Part 9. Galvanized steel sheets and strips Released on.2006-08-28 2007-03-01 implementation People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued ForewordSN/T 1733 "Non-Genuine Steel Inspection and Identification Regulations" is divided into 11 parts. --- Part 1. Slab; --- Part 2. color coated board; --- Part 3. Billet/round billet; --- Part 4. Wire rod; ---Part 5. Profiles; ---Part 6. Pipe; ---Part 7. Stainless steel plate (belt); ---Part 8. Tin-plated steel sheet; ---Part 9. Galvanized steel sheets and strips; ---Part 10. Cold rolled steel sheets and strips; --- Part 11. Hot rolled steel sheets and strips. This part is the ninth part of SN/T 1733 "Non-Quality Steel Inspection and Identification Regulations". Appendix A of this part is a normative appendix, and Appendix B is an informative appendix. This part is proposed and managed by the National Certification and Accreditation Administration. This section drafted by. Guangdong Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, Jiangsu Entry and Exit Inspection and Quarantine Bureau, Shandong Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, Shenzhen Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, Shanghai Entry-Exit Inspection and Quarantine Bureau, Zhejiang Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, and Tianjin Entry-Exit Inspection Epidemic situation. The main drafters of this section. Cao Biao, Peng Shoubiao, Chen Ming, Gu Yu, Shi Songjie, Liang Shu, Wu Yiwen, Shen Yi, Tang Xiangzhi. This section is the first industry standard for entry-exit inspection and quarantine. Non-genuine steel inspection and identification procedures Part 9. Galvanized steel sheets and strips1 ScopeThis part specifies the definition, technical requirements, inspection and identification rules and test results of non-genuine galvanized steel sheets and strips. This section The galvanized steel sheets and strips involved include hot-dip galvanized and electrogalvanized steel sheets and strips. This part is applicable to the inspection and identification of galvanized steel sheets and steel strips such as non-genuine galvanized sheets and steel strips and primary residuals. This section also applies to the inspection and identification of non-authentic aluminum and galvanized aluminum alloy sheets and strips.2 Normative referencesThe terms in the following documents are incorporated by this section into the terms of this section. All dated references, all subsequent Modifications (not including errata content) or revisions do not apply to this section, however, studies that encourage parties to reach an agreement under this section are No, the latest version of these files can be used. For undated references, the latest edition applies to this section. GB/T 2518 continuous hot-dip galvanized steel sheet and strip GB/T 15675 continuous electroplated zinc cold rolled steel sheet and strip3 Terms and definitionsThe following terms and definitions established in GB/T 2518 and GB/T 15675 apply to this section. 3.1 Dimensions, shapes, appearance quality, performance quality, packaging, etc. comply with the corresponding contractual standards (see Appendix A) or GB/T 2518 And the provisions of GB/T 15675. 3.2 Dimensions, shapes, surface quality, physical and chemical properties, some or all of the packaging do not meet the corresponding standard requirements, but the product still retains its Galvanized sheet steel and steel strip for general purpose use. Trade is accustomed to calling it "Secondary." 3.3 Usually refers to some surplus accumulated products left after the manufacturer fulfills the contract. 3.4 There are serious defects in the goods, scraps that cannot be used for the original purpose, or galvanized steel products that can only be used for smelting and recycling.4 Technical requirements4.1 The size, shape, appearance quality, performance quality, packaging, etc. of genuine galvanized steel sheets and steel strips meet the corresponding contractual standards or GB/T 2518 and GB/T 15675 regulations. 4.2 Part or all of the quality specifications of non-genuine galvanized steel sheets and strips in terms of size, shape, appearance quality, performance quality, packaging, etc. The corresponding first-class product standard requirements are not met. See Appendix B for the characteristics of common non-genuine galvanized steel sheets and strips. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 1733.9-2006_English be delivered?Answer: Upon your order, we will start to translate SN/T 1733.9-2006_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 1733.9-2006_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 1733.9-2006_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
