SN/T 1733.11-2006 English PDFUS$229.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 1733.11-2006: Rules for the inspection of non-prime steel material. Part 11: Hot-rolled steel sheets and strips Status: Valid
Basic dataStandard ID: SN/T 1733.11-2006 (SN/T1733.11-2006)Description (Translated English): Rules for the inspection of non-prime steel material. Part 11: Hot-rolled steel sheets and strips Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: H40 Classification of International Standard: 77.140 Word Count Estimation: 7,730 Date of Issue: 2006-08-28 Date of Implementation: 2007-03-01 Quoted Standard: GB/T 710; GB/T 711; GB/T 912; GB/T 3274; GB/T 3524; GB/T 8749 Issuing agency(ies): General Administration of Customs Summary: This standard specifies the hot-rolled steel sheet and strip of non-genuine definition of technical requirements, inspection and appraisal rules and test results to determine. This standard applies to non-genuine hot-rolled steel sheet and strip, and a residual products such as hot rolled steel sheet and strip inspection and appraisal. Does not apply to non-genuine hot rolled pressure vessel steel, automotive steel sheets, steel plates and other special steel containers. SN/T 1733.11-2006: Rules for the inspection of non-prime steel material. Part 11: Hot-rolled steel sheets and strips---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Rules for the inspection of non-prime steel material.Part 11. Hot-rolled steel sheets and strips Book of the People's Republic of China Entry and Exit Inspection and Quarantine Non-genuine steel inspection and identification procedures Part 11. Hot rolled steel sheets and strips Released on.2006-08-28 2007-03-01 implementation People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued ForewordSN/T 1733 "Non-Genuine Steel Inspection and Identification Regulations" is divided into 11 parts. --- Part 1. Slab; --- Part 2. color coated board; --- Part 3. Billet/round billet; --- Part 4. Wire rod; ---Part 5. Profiles; ---Part 6. Pipe; ---Part 7. Stainless steel plate (belt); ---Part 8. Tin-plated steel sheet; ---Part 9. Galvanized steel sheets and strips; ---Part 10. Cold rolled steel sheets and strips; --- Part 11. Hot rolled steel sheets and strips. This part is the 11th part of SN/T 1733 "Non-Quality Steel Inspection and Identification Regulations". Appendix A of this section is a normative appendix, and Appendix B is an informative appendix. This part is proposed and managed by the National Certification and Accreditation Administration. This section drafted by. Guangdong Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, Jiangsu Entry and Exit Inspection and Quarantine Bureau, Shandong Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, Shenzhen Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, Shanghai Entry-Exit Inspection and Quarantine Bureau, Zhejiang Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, and Tianjin Entry-Exit Inspection Epidemic situation. The main drafters of this section. Li Chengming, Peng Xiaogang, Zheng Jianguo, Gu Yu, Shi Songjie, Liao Wenzhong, Wu Yiwen, Shen Yi, Zhang Yongli. This section is the first industry standard for entry-exit inspection and quarantine. Non-genuine steel inspection and identification procedures Part 11. Hot rolled steel sheets and strips1 ScopeThis part specifies the definition, technical requirements, inspection and identification rules and test results of non-genuine hot-rolled steel sheets and strips. This section applies to the inspection and identification of hot-rolled steel sheets and strips such as non-genuine hot-rolled steel sheets and strips and primary residuals. Not applicable to non-positive Special steel plates for hot-rolled pressure vessel steel plates, automotive steel plates, and steel plates for containers.2 Normative referencesThe terms in the following documents become the terms of this section by reference in this section. All dated references, followed by all Modifications (not including errata content) or revisions do not apply to this section, however, parties to agreements based on this section are encouraged to study Is it possible to use the latest version of these files? For undated references, the latest edition applies to this section. GB/T 710 high quality carbon structural steel hot rolled steel sheet and strip GB/T 711 high quality carbon structural steel hot rolled thick steel plate and wide steel strip GB/T 912 carbon structural steel and low alloy structural steel hot rolled steel sheet and strip GB/T 3274 carbon structural steel and low alloy structural steel hot rolled thick steel plate and steel strip GB/T 3524 carbon structural steel and low alloy structural steel hot rolled steel strip GB/T 8749 high quality carbon structural steel hot rolled steel strip3 Terms and definitionsThe following terms and definitions apply to this section. 3.1 Dimensions, shapes, appearance, physical and chemical properties, packaging, etc. meet the contractual standards (see Appendix A) or GB/T 710, GB/T 711, Hot-rolled steel sheets and strips specified in GB/T 912, GB/T 3274, GB/T 3524, and GB/T 8749 standards. 3.2 Refers to the size, shape, surface quality, physical and chemical properties, some or all of the packaging does not meet the corresponding standard requirements, but the product remains Hot rolled steel sheets and strips for general purpose use. Trade is accustomed to calling it "secondary". 3.3 Refers to the long production time, the different production time of various materials and various specifications accumulated after the contract production and delivery, different batches Hot rolled steel sheets and strips for secondary products. 3.4 There are serious defects in the arrival, scraps that cannot be directly used, or hot-rolled steel sheets and strips that can only be used for smelting recovery.4 Technical requirements4.1 The specifications, appearance, physical and chemical properties, packaging, etc. of genuine hot-rolled steel sheets and steel strips are in compliance with the contractual standards. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 1733.11-2006_English be delivered?Answer: Upon your order, we will start to translate SN/T 1733.11-2006_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 1733.11-2006_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 1733.11-2006_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
