SN/T 1730.2-2006 English PDF

US$159.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 1730.2-2006: Safety performance test for export fireworks and firecrackers. Part 2: Thermal stability at 75 Celsius
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 1730.2-2006	159	Add to Cart	2 days	Safety performance test for export fireworks and firecrackers. Part 2: Thermal stability at 75 Celsius	Valid

Similar standards

GB/T 3634.2   GB/T 3634.1   SN/T 1730.8   SN/T 1730.9   SN/T 1730.10   

Basic data

Standard ID: SN/T 1730.2-2006 (SN/T1730.2-2006)
Description (Translated English): Safety performance test for export fireworks and firecrackers. Part 2: Thermal stability at 75 Celsius
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: G89
Classification of International Standard: 71.100.30
Word Count Estimation: 4,476
Date of Issue: 2006-01-26
Date of Implementation: 2006-08-16
Quoted Standard: GB 50089; SN/T 1725
Adopted Standard: ST/SG/AC.10/11/Rev.4, MOD
Regulation (derived from): Industry Standard Notice 2006 No. 4 (total of 76)
Issuing agency(ies): General Administration of Customs
Summary: This standard specifies the exports of fireworks 75��C thermal stability test methods and evaluation of results. This standard applies to exports of fireworks 75��C thermal stability test.

SN/T 1730.2-2006: Safety performance test for export fireworks and firecrackers. Part 2: Thermal stability at 75 Celsius

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Safety performance test for export fireworks and firecrackers.Part 2. Thermal stability at 75 Celsius People's Republic of China Entry-Exit Inspection and Quarantine Industry Standard Export fireworks and firecrackers safety performance test method Part 2. 75 ° C thermal stability test Released on.2006-01-26 Implementation of.2006-08-16 People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued

Foreword

SN/T 1730 "Safety Performance Test Method for Export Fireworks and Firecrackers" is divided into. --- Part 1. General; --- Part 2. 75 ° C thermal stability test; --- Part 3. Low temperature stability test; ---Part 4. Anti-vibration test; --- Part 5. Drop test; --- Part 6. Explosion test; --- Part 7. Packaging identification; --- Part 8. Product drug testing; --- Part 9. Aphorism label inspection; --- Part 10. Use safety performance test. This part is the second part of SN/T 1730. This section refers to the United Nations "Dangerous Goods Transport Recommendations - Test and Standards Manual" (Recommendationsonthe TRANSPORTOFDANGEROUSGOODS---ManualofTestsandCriteria)(ST/SG/AC.10/11/ Rev. 4) ("Little Orange Book"). This part is proposed and managed by the National Certification and Accreditation Administration. This section drafted by. Jiangxi Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China. The main drafters of this section. Liu Jieguang, Wu Jinsong, Gui Jiaxiang, Liu Chunwen, Lu Zhong, Zeng Shaohua. This section is the first industry standard for entry-exit inspection and quarantine. Export fireworks and firecrackers safety performance test method Part 2. 75 ° C thermal stability test

1 Scope

This part of SN/T 1730 specifies the test methods and results of the 75 °C thermal stability test for export fireworks. This section applies to the inspection of the thermal stability of export fireworks and firecrackers at 75 °C.

2 Normative references

The terms in the following documents become the provisions of this section by reference to this part of SN/T 1730. Quotations with dated , all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved under this section The parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this section. GB 50089 civil blasting equipment factory design safety specification SN/T 1725 export fireworks and firecracker terminology

3 Terms and definitions

The terms and definitions established by SN/T 1725 apply to this part of SN/T 1730.

4 Test methods

4.1 Facilities and materials 4.1.1 Anti-explosion room should meet the requirements of GB 50089. 4.1.2 Electric oven. Equipped with ventilation and with explosion-proof electrical devices and a thermostat capable of maintaining and recording 75 °C ± 2 ° C, the oven should be There are dual temperature thermostats or protection against thermal runaway when the thermostat fails. Should also be equipped with a temperature recorder The thermocouple is used to evaluate whether an exothermic temperature rise occurs. 4.2 Procedure 4.2.1 The sample is a transport package, that is, a box of packaged products. Some products may be too long, such as rocket products, can cut off a piece of wood The rods are loaded into similar smaller packages and tested. 4.2.2 When dealing with articles of unknown performance, a small amount of pyrotechnics should be taken from the product for a 75 °C thermal stability test to determine its performance. If no explosive reaction occurs when testing with a small amount of material, test according to 4.2.3. If an explosion or fire occurs The thermal stability does not meet the transportation requirements. 4.2.3 Place the thermocouple on the surface of an article near the center of the package and thermocouple it to a temperature logger. The entire package The piece (along with the thermocouple) is placed in a constant temperature oven placed in the anti-explosion room, the temperature is adjusted at 75 ° C, the constant temperature oven power is turned on, and the anti-explosion room is closed. Room door, then open the total power from the anti-explosion room, heat the oven to 75 ° C, the sample is kept in the constant temperature oven at this temperature for 48h or It is until there is a sign of fire, explosion, smoke, decomposition or some kind of self-heating.

5 Evaluation of results

In the test, if there is an explosion, fire, smoke, decomposition, temperature rise of more than 3 ° C, the shell of the product is damaged, the result is "+". in case No changes were observed and the result was "-". ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 1730.2-2006_English be delivered?

Answer: Upon your order, we will start to translate SN/T 1730.2-2006_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 1730.2-2006_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 1730.2-2006_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.