SN/T 1277-2017 English PDFUS$229.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 1277-2017: Detection and identification of Hemiberlesia pitysophila Takagi Status: Valid SN/T 1277: Historical versions
Basic dataStandard ID: SN/T 1277-2017 (SN/T1277-2017)Description (Translated English): Detection and identification of Hemiberlesia pitysophila Takagi Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: B16 Classification of International Standard: 65.020 Word Count Estimation: 10,142 Date of Issue: 2017-11-07 Date of Implementation: 2018-06-01 Older Standard (superseded by this standard): SN/T 1277-2003 Regulation (derived from): National-Quality-Inspection-Accrediatation (2017) 481 Issuing agency(ies): General Administration of Customs Summary: This standard specifies the quarantine and identification methods for Hemiberlesia pitysophila Takagi in plant quarantine. This standard is applicable to the quarantine and identification of Pinus genus (leaf needle, branching on the branch) plant material carrying pine cones. SN/T 1277-2017: Detection and identification of Hemiberlesia pitysophila Takagi---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Detection and identification of Hemiberlesia pitysophila Takagi People's Republic of China entry and exit inspection and quarantine industry standards Replace SN/T 1277-2003 Quarantine identification method for pine cone Released on.2017-11-07 2018-06-01 implementation People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued Entry-Exit Inspection and Quarantine Industry Standard Quarantine identification method for pine cone China Standard Press Publishing First edition, July.2018 ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces SN/T 1277-2003 "Quarantine and Identification Methods for Pines." Compared with SN/T 1277-2003, the main technical changes of this standard are as follows. --- Added two chapters on basic information and method principles, and adjusted the original standard title and structure appropriately; --- Increased the description of the subfamily, family and genus of the pine cones; --- An identification search table and partial feature maps of the pine cones and their approximate species have been added. This standard is proposed and managed by the National Certification and Accreditation Administration. This standard was drafted. China Academy of Inspection and Quarantine, Shanxi Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, the Chinese People And Guojiaxing Entry-Exit Inspection and Quarantine Bureau. Drafters of this standard. Chen Naizhong, Li Huiping, Ji Hongtie, Yu Yanxue, Zhang Junhua, Zhou Ping. The previous versions of the standards replaced by this standard are. ---SN/T 1277-2003. Quarantine identification method for pine cone1 ScopeThis standard specifies the quarantine and identification methods for Hemiberlesiapitysophila Takagi in phytosanitary diseases. This standard is applicable to the quarantine and identification of Pinus genus (leaf needle, branching on the branch) plant material carrying pine cones.2 Terms and definitionsThe following terms and definitions apply to this document. 2.1 Shell scalecover The protective structure of the locust mites, independent of the worm body, coated on the back of the worm or the ventral or ventral surface, secreted by the glands of the worm's hip plate The substance and anal colloidal excrement are bonded to the nymph's suede. 2.2 Disc gland discalpores A type of pore-like circular gland structure that secretes waxy material covering the surface of the worm. Note. The disc gland in the Shield family is mostly five glands. The quinquelocularpores are round, with a grid at the center and surrounded by five compartments. Distributed over the valve Nearby is called the valve gland; distributed near the vulva, called the perineal gland pores [perivulvar (disc) pores], mostly 2 groups ~ 5 groups. 2.3 Catheter ceratubae A type of cylindrical or nearly cylindrical glandular structure that secretes wax to form a worm cover or oocyst. Note. The glandular tube in the Shield family is columnar. The columnar gland body is cylindrical, nearly parallel on both sides, and has a ring or a ring of hardened rings at the mouth. Distributed by location The back of the body is called the dorsal gland; the abdomen is distributed on the ventral surface of the body; the gland is distributed on the edge of the buttock. According to the shape, the inner end of the nozzle has a ring of hardening ring Single-plug type, double-bolt type with two-ring hardening ring. 2.4 Hip plate pygidium A plate-like body that healed and ossified at the end of the abdomen. 2.5 Pneumonia pygidialplates The ossified flaky appendages on the edge of the buttocks are in various shapes, and most of the branches are comb-like, sometimes on the anterior hip. 2.6 Pussy leaf pygidiallobes The flattened lobular appendages, which are generally ossified at the edge of the buttocks, appear in pairs and are symmetrically distributed on either side of the edge of the hip. Note. The pair located in the center of the hip plate is called the first pair of hips, also called the middle and the hips; the pair on the sides of the middle and the hips is called the second pair of hips; Leaves; some species also have a fourth pair of hips. 2.7 Hardened rod paraphyses The long, capsular skin thickened portion of the buttocks extending forward from the edge. Note. Also known as thick skin stick. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 1277-2017_English be delivered?Answer: Upon your order, we will start to translate SN/T 1277-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 1277-2017_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 1277-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version SN/T 1277-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 1277-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |