SN/T 1094-2013 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 1094-2013	559	Add to Cart	3 days	Rules for the inspection of hand-held and air-leg pneumatic rock drills for export	Obsolete
SN/T 1094-2002	239	Add to Cart	2 days	Exports of hand-held air leg rock drill inspection procedures	Obsolete

Similar standards

GB 17957   JB/T 10247   JB/T 8550   

Basic data

Standard ID: SN/T 1094-2013 (SN/T1094-2013)
Description (Translated English): Rules for the inspection of hand-held and air-leg pneumatic rock drills for export
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: J84
Classification of International Standard: 25.140
Word Count Estimation: 14,124
Older Standard (superseded by this standard): SN/T 1094-2002
Quoted Standard: GB/T 2828.1; GB/T 5621; GB/T 5898; GB/T 6247; GB/T 6481; GB/T 15706.2; GB 17957-2005; JB/T 1590; JB/T 1674-2004; JB/T 4041; JB/T 7165; JB/T 7301-2006; JB/T 7302; JB/T 9854; JB/T 9857; SN/T 0002
Regulation (derived from): National quality recognition (2013) 569
Issuing agency(ies): General Administration of Customs
Summary: This standard specifies the export handheld, sampling, testing, and the results of air-leg rock drill judgment. This standard is applicable to the export inspection export handheld, air-leg rock drill.

SN/T 1094-2013: Rules for the inspection of hand-held and air-leg pneumatic rock drills for export

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rules for the inspection of hand-held and air-leg pneumatic rock drills for export People's Republic of China Entry-Exit Inspection and Quarantine Standards Instead of the SN/T 1094-2002 Export handheld, air-leg rock drill test procedures Issued on. 2013-11-06 2014-06-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. Instead of the standard SN/T 1094-2002 "export handheld, air-leg rock drill for the inspection." This standard compared with SN/T 1094-2002, the main technical changes are as follows. --- Amendments to the normative references; --- Added some terms and definitions; --- Increasing the general requirements in Chapter 4; --- Taking into account the actual situation of inspection and supervision work for the test mode and test methods were adjusted and modified; --- The inspection of the project, the content and requirements of the adjustments and additions. Some elements of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard was drafted. People's Republic of China Zhejiang Exit Inspection and Quarantine. Drafters of this standard. Wu Zhiming, Xu unloading south. This standard replaces the standards previously issued as follows. --- SN/T 1094-2002.

Introduction

"Export handheld, air-leg rock drill test procedures" export hand-held, air-leg rock drill products inspection work based on the Handheld mouth, air-leg rock drill testing products play a guiding and regulating. With China's accession to the World Trade Organization (WTO) and the revised "People's Republic of China Import and Export Commodity Inspection Law" Import and Export Commodity Inspection Test mode has undergone great changes, the inspection and quarantine work to meet the actual needs, Inspection and Quarantine Inspection and the competent departments to establish a Phytophthora standard system. This standard belongs to the standard system of inspection and quarantine fourth floor --- personality standard specifies export handheld, air-leg rock drill products seized Inspection requirements. Export handheld, air-leg rock drill test procedures

1 Scope

This standard specifies the export handheld, sampling, testing and the results of air-leg rock drill determination. This standard is applicable to the export inspection export handheld, air-leg rock drill.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. Batch inspection sampling plan by acceptance quality limit (AQL) inspection. GB/T 2828.1 Sampling procedures for inspection - Part 1 GB/T 5621 drilling machines and pneumatic tools Performance Test Method GB/T 5898 Hand-held non-electric power tools - Noise measurement category Engineering method (grade 2) GB/T 6247 term drilling machines and pneumatic tools GB/T 6481 drilling with a hollow hexagonal drill rod connected vertebrae GB/T 15706.2 Safety of machinery - Basic concepts, general principles for design - Part 2. Technical principles GB 17957-2005 drilling machines and pneumatic tools - Safety requirements JB/T 1590 drilling machines and pneumatic tools Model methodology JB/T 1674-2004 Air-leg rock drill JB/T 4041 drilling machines and pneumatic tools product cleanliness generic detection method JB/T 7165 drilling machines and pneumatic tools assembly general technical conditions JB/T 7301-2006 jackhammer JB/T 7302 drilling machines and pneumatic tools products packaging technology JB/T 9854 gas leg JB/T 9857 drilling machines and pneumatic tools paint general technical conditions The basic provisions of SN/T 0002 inspection of import and export of electromechanical products prepared

3 Terms and Definitions

GB 17957, GB/T 6247 and SN/T 0002 defined by the following terms and definitions apply to this document. 3.1 Rock drill rockdrils Impact and rotary machine having a mechanism used to drill holes in rock. 3.2 Jackhammer hand-heldpneumaticrockdrils Held by hand, or by the weight of the rock drill thrust force applied by the operator of the rock drilling machine. 3.3 Air-leg rock drill air-legpneumaticrockdrils Gas leg rest, advancing rock drill. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 1094-2013_English be delivered?

Answer: Upon your order, we will start to translate SN/T 1094-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 1094-2013_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 1094-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version SN/T 1094-2013?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 1094-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.