SN/T 0997-2001 English PDFUS$239.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 0997-2001: Exports of special machine tools. The WEDM inspection procedures Status: Obsolete
Basic dataStandard ID: SN/T 0997-2001 (SN/T0997-2001)Description (Translated English): Exports of special machine tools. The WEDM inspection procedures Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: J59 Word Count Estimation: 6,661 Date of Issue: 2001-12-30 Date of Implementation: 2002-06-01 Regulation (derived from): National Quality Inspection (2012) 777; industry standard filing Notice 2013 No. 4 (No. 160 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China Summary: This standard specifies the export Reciprocating wire (high-speed wire) WEDM sampling, inspection and test results to determine. This standard applies to exports Reciprocating wire (high-speed wire) WEDM test. SN/T 0997-2001: Exports of special machine tools. The WEDM inspection procedures---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Exports of special machine tools.The WEDM inspection procedures People's Republic of China entry and exit inspection and quarantine industry standards Export special processing machine Wire EDM machine inspection procedures People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued ForewordUnder normal circumstances, the number of batches of export machine tools is small, considering the high quality requirements of wire cutting machines, many inspection items, and long test cycles. Point, combined with the industry's customary practices, this standard uses the percentage quantitative sampling method. This standard is proposed and managed by the National Certification and Accreditation Administration of the People's Republic of China. This standard was drafted by the Jiangsu Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China. The main drafters of this standard. Lu Quanlong, Huang Youyong, Xu Jun, Zhu Jiayu. This standard is the industry standard for inspection and quarantine issued for the first time. People's Republic of China entry and exit inspection and quarantine industry standards Export special processing machine Wire EDM machine inspection procedures range This standard specifies the sampling, inspection and inspection results of the export reciprocating wire (high-speed wire) EDM wire cutting machine. This standard is applicable to the inspection of export reciprocating wire (high speed wire) EDM wire cutting machine. The provisions contained in the following standards constitute provisions of this standard by reference in this standard. At the time of publication of this standard, the versions shown are To be effective. All standards will be revised and parties using this standard should explore the possibility of using the latest version of the following standards. GB 13567-1998 EDM machine tool safety protection technical conditions Definition This standard uses the following definition. Inspection lot inspectionlot The same specifications, models, and unit products produced under the same production conditions for the purpose of sampling inspection are called inspection batches. Batch. Note. The working voltage and frequency of the machine tool in the same inspection lot should be the same. sampling . Sampling conditions In the case of factory inspection, the sample should be taken from the packaged product. Note. In special cases, samples can also be taken from the products to be packaged into the warehouse. . Sampling plan Using a quantitative sampling plan, the sample size is 10% of the test lot. Note. The value calculated by 10% is less than the carry of the integer. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 0997-2001_English be delivered?Answer: Upon your order, we will start to translate SN/T 0997-2001_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 0997-2001_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 0997-2001_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
