SN/T 3701.4-2014 English PDFUS$289.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 3701.4-2014: Technical requirements for the inspection of used electrical and mechanical products for import. Part 4: Machine tools for working metel or cermets, without removing material Status: Valid
Basic dataStandard ID: SN/T 3701.4-2014 (SN/T3701.4-2014)Description (Translated English): Technical requirements for the inspection of used electrical and mechanical products for import. Part 4: Machine tools for working metel or cermets, without removing material Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: J59 Classification of International Standard: 25.080.99 Word Count Estimation: 11,147 Quoted Standard: GB 2893; GB 2894; GB 5226.1-2008; GB 12265.3; GB 17888.1; GB 17888.4; GB 18209.2 Regulation (derived from): AQSIQ notification issued in 2014 on the first batch of 230 industry-standard entry-exit inspection and quarantine Issuing agency(ies): General Administration of Customs Summary: This Standard specifies the import of old metal or cermet non-cutting machine tools (hereinafter referred to as the old machine, see Appendix A) inspection technical requirements. This section applies to the import of used machines pre-shipment inspection SN/T 3701.4-2014: Technical requirements for the inspection of used electrical and mechanical products for import. Part 4: Machine tools for working metel or cermets, without removing material---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Technical requirements for the inspection of used electrical and mechanical products for import Part 4. Machine tools for working metel or cermets, without removing material People's Republic of China Entry-Exit Inspection and Quarantine Standards Import of used mechanical and electrical product testing technical requirements Part 4. metal or cermet Non-cutting machine tools machanicalproductsforimport-Part 4. Machinetoolsforworking metelorcermets, withoutremovingmaterial Issued on. 2014-01-13 2014-08-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released ForewordSN/T 3701 "imported old mechanical and electrical product testing technical requirements" is divided into seven sections. --- Part 1. continuous freight elevators and conveyors; --- Part 2. Leather and leather treatment, processing, production machines; --- Part 3. electroplating, electrolysis or electrophoresis machines and apparatus; --- Part 4. Non-metal or cermet cutting machine tools; --- Part 5. stone, ceramics, concrete, asbestos cement or similar mineral material processing machine; --- Part 6. earthwork loading machinery; --- Part 7. agriculture, horticulture and forestry machinery. This section SN/T 3701 Part 4. This section drafted in accordance with GB/T 1.1-2009 given rules. This section proposed and managed by the National Certification and Accreditation Administration Committee. This part of the People's Republic of China by the Shanghai Exit Inspection and Quarantine is responsible for drafting. The main drafters of this section. Yan Jia Yuan so strong, Chu Zheng, Qian Bo (Shanghai Science and Technology Institute of Electrical and Mechanical Technology Detection), Lu Ling, Zhang Hao, Gu Tian Bin, Teng Minghua, Xu Zhiguo, Wu Fei. Import of used mechanical and electrical product testing technical requirements Part 4. metal or cermet Non-cutting machine tools1 ScopeThis section SN/T 3701 provides for the import of used metal or metal ceramic non-cutting machine tools (hereinafter referred to as the old machine, see Appendix A) technical inspection requirements. This section applies to the import of used machines pre-shipment inspection and receiving inspection.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB 2893 Safety colors GB 2894 Guidelines for the use and safety signs GB 5226.1-2008 Safety of machinery electrical equipment Part 1. General requirements GB 12265.3 Safety of machinery to avoid crushing of parts of the human body minimum spacing GB 17888.1 machinery for safe access to machines and industrial plants - Part 1. enter fixed between two levels Select facility GB 17888.4 Safety of machinery stationary facilities - Part 4. Fixed ladders GB 18209.2 Electrical safety of machinery - Indication, marking and actuation - Part 2. Requirements for marking3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Pre-shipment inspection pre-inspectionbeforeloading In the port of departure before the old mechanical and electrical products shipped, the old mechanical and electrical products for testing, declared their consistency and safety, health, environment Protection and other projects carried out conformity assessment activities. 3.2 Receiving inspection (import inspection post) inspectionafterimport After the old mechanical and electrical products import entry inspection and quarantine agencies in accordance with Chinese laws, administrative regulations and technical specifications of the mandatory requirements, Its arrival of consistency and safety, health, environmental protection and other projects carried out conformity assessment activities. 4. Technical Requirements 4.1 General requirements Import of used machine tools should conform to the safety of Chinese laws, administrative regulations and technical specifications, environmental protection, energy efficiency, health forced ...... |
