SJ/T 10410-2016 PDF EnglishUS$105.00 · In stock · Download in 9 seconds
SJ/T 10410-2016: Permanent ferrite materials Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid SJ/T 10410: Historical versions
Similar standardsSJ/T 10410-2016: Permanent ferrite materials---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/SJT10410-2016ELECTRONICS INDUSTRY STANDARD ICS 29.030 L 19 Record No.. Replacing SJ/T 10410-2002 Permanent Ferrite Materials Issued on. APRIL 05, 2016 Implemented on. SEPTEMBER 01, 2016 Issued by. Ministry of Industry and Information Technology of PRC Table of ContentsForeword... 3 1 Scope... 4 2 Normative References... 4 3 Nomenclature and Classification... 4 4 Requirements... 5 5 Test Methods... 7 Appendix A (Informative) Physical Properties of Permanent Ferrite Materials. 8ForewordThis Standard was drafted as per the rules specified in GB/T 1.1-2009. This Standard replaced SJ/T 10410-2002 Permanent Ferrite Materials. Compared with SJ/T 10410-2002, this Standard made the major changes as follows. --- Among the sintered permanent ferrite material designations, delete Y22H, Y26H- 2, Y27H, YN1T, YN4T and YN4TH; add Y33H-2, Y41, Y41H, Y42, Y42H, Y43. --- Normative references adopt the latest version; the test methods for main magnetic properties of the materials, and the specification, size and appearance requirements of the test sample shall be as specified in GB/T 3217-2013. Please note that some contents of this document may involve the patents. The issuing agency of this document does not assume the responsibility to identify these patents. This Standard shall be under the jurisdiction of National Technical Committee on Magnetics and Ferrite Materials of Standardization Administration of China (SAC/TC 89). Drafting organization of this Standard. Yibin Jinchuan Electronics Co., Ltd. Chief drafting staffs of this Standard. Ma Zirong, Shi Qinghui, Li Wenqing, Xu Xiaoli, and Wang Mingyin. The historical editions replaced by this Standard are as follows. --- SJ 285-1997; --- SJ/T 10410-1993, SJ/T 10410-2002. Permanent Ferrite Materials1 ScopeThis Standard specifies the nomenclature and classification, requirements and test methods of permanent ferrite materials. This Standard is applicable to permanent ferrite materials, including sintered permanent ferrite materials and bonded permanent ferrite materials.2 Normative ReferencesThe following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this document. GB/T 3217-2013 Permanent Magnet (Magnetically Hard) Materials - Methods of Measurement of Magnetic Properties SJ/T 10213-1991 Type Designation System for Ferrite Materials and Components 3 Naming and Classification 3.1 Naming The naming of the permanent ferrite materials shall be as specified in SJ/T 10213- 1991.4 Requirements4.1 The main magnetic properties of sintered permanent ferrite materials shall meet the requirements of Table 1.For physical properties, see Appendix A. 4.2 The main magnetic properties of bonded permanent ferrite materials shall meet the requirements of Table 2.For physical properties, see Appendix A.5 Test MethodsThe test methods for the main magnetic properties of materials and the specifications, dimensions,Appendix A(Informative) Physical Properties of Permanent Ferrite Materials A.1 Physical properties of sintered permanent ferrite materials The physical properties of sintered permanent ferrite materials can refer to Table A.1. A.2 Physical properties of bonded permanent ferrite materials The physical properties of bonded permanent ferrite materials can refer to Table A.2. SJ/T 10410-2016 ELECTRONICS INDUSTRY STANDARD ICS 29.030 L 19 Record No.. Replacing SJ/T 10410-2002 Permanent Ferrite Materials Issued on. APRIL 05, 2016 Implemented on. SEPTEMBER 01, 2016 Issued by. Ministry of Industry and Information Technology of PRCTable of ContentsForeword... 3 1 Scope... 4 2 Normative References... 4 3 Nomenclature and Classification... 4 4 Requirements... 5 5 Test Methods... 7 Appendix A (Informative) Physical Properties of Permanent Ferrite Materials. 8ForewordThis Standard was drafted as per the rules specified in GB/T 1.1-2009. This Standard replaced SJ/T 10410-2002 Permanent Ferrite Materials. Compared with SJ/T 10410-2002, this Standard made the major changes as follows. --- Among the sintered permanent ferrite material designations, delete Y22H, Y26H- 2, Y27H, YN1T, YN4T and YN4TH; add Y33H-2, Y41, Y41H, Y42, Y42H, Y43. --- Normative references adopt the latest version; the test methods for main magnetic properties of the materials, and the specification, size and appearance requirements of the test sample shall be as specified in GB/T 3217-2013. Please note that some contents of this document may involve the patents. The issuing agency of this document does not assume the responsibility to identify these patents. This Standard shall be under the jurisdiction of National Technical Committee on Magnetics and Ferrite Materials of Standardization Administration of China (SAC/TC 89). Drafting organization of this Standard. Yibin Jinchuan Electronics Co., Ltd. Chief drafting staffs of this Standard. Ma Zirong, Shi Qinghui, Li Wenqing, Xu Xiaoli, and Wang Mingyin. The historical editions replaced by this Standard are as follows. --- SJ 285-1997; --- SJ/T 10410-1993, SJ/T 10410-2002. Permanent Ferrite Materials1 ScopeThis Standard specifies the nomenclature and classification, requirements and test methods of permanent ferrite materials. This Standard is applicable to permanent ferrite materials, including sintered permanent ferrite materials and bonded permanent ferrite materials.2 Normative ReferencesThe following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this document. GB/T 3217-2013 Permanent Magnet (Magnetically Hard) Materials - Methods of Measurement of Magnetic Properties SJ/T 10213-1991 Type Designation System for Ferrite Materials and Components 3 Naming and Classification 3.1 Naming The naming of the permanent ferrite materials shall be as specified in SJ/T 10213- 1991.4 Requirements4.1 The main magnetic properties of sintered permanent ferrite materials shall meet the requirements of Table 1.For physical properties, see Appendix A. 4.2 The main magnetic properties of bonded permanent ferrite materials shall meet the requirements of Table 2.For physical properties, see Appendix A.5 Test MethodsThe test methods for the main magnetic properties of materials and the specifications, dimensions,Appendix A(Informative) Physical Properties of Permanent Ferrite Materials A.1 Physical properties of sintered permanent ferrite materials The physical properties of sintered permanent ferrite materials can refer to Table A.1. A.2 Physical properties of bonded permanent ferrite materials The physical properties of bonded permanent ferrite materials can refer to Table A.2. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. |
