SB/T 10495-2008 English PDF
Basic dataStandard ID: SB/T 10495-2008 (SB/T10495-2008)Description (Translated English): Meat and poultry processing equipment. Pigs carcass hand-push conveying rail Sector / Industry: Domestic Trade Industry Standard (Recommended) Classification of Chinese Standard: X99 Classification of International Standard: 67.260 Word Count Estimation: 5,522 Date of Issue: 2008-09-27 Date of Implementation: 2009-03-01 Quoted Standard: GB/T 191; GB/T 13912; GB 16798 Regulation (derived from): ?Ministry of Commerce Announcement 2008 No.72 Issuing agency(ies): Ministry of Commerce of the People's Republic of China Summary: This standard specifies the type of push-type pigs being transported heir orbit, basic parameters, technical requirements, test methods, inspection rules, signs, packaging, transport. This standard applies to join with the hanger, hand push carcass structure steel or steel conveyor track. SB/T 10495-2008: Meat and poultry processing equipment. Pigs carcass hand-push conveying rail---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Meat and poultry processing equipment.Pigs carcass hand-push driving rail ICS 67.260 X99 Record number. 25141-2008 People's Republic of China domestic trade industry standard Livestock and poultry slaughtering and processing equipment Hand-pushing pig carcass transport track Released on.2008-09-27 2009-03-01 implementation Published by the Ministry of Commerce ForewordThis standard is proposed and managed by the Ministry of Commerce of the People's Republic of China. This standard was drafted by the Ministry of Commerce's Slaughter Technology Appraisal Center and Qingdao Jianhua Food Machinery Manufacturing Co., Ltd. The main drafters of this standard. Yan Wenlai, Yang Huajian, Zhang Xinling, Hu Xin. Livestock and poultry slaughtering and processing equipment Hand-pushing pig carcass transport track1 ScopeThis standard specifies the type, basic parameters, technical requirements, test methods, inspection rules, signs, and packages of the hand-pushed pig carcass conveying track. Loading and transportation. This standard is applicable to the hand-pushing pig carcass conveying track with hanger connection, steel or steel pipe structure.2 Normative referencesThe terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard. GB/T 191 packaging storage and transportation icon Technical requirements and test methods for hot-dip galvanized layer of GB/T 13912 metal-clad steel parts GB 16798 Food Machinery Safety and Hygiene3 type and basic parameters3.1 type Hand-pushing track of steel or steel pipe structure, including track ballast. 3.2 Basic parameters Should meet the requirements of Table 1, Table 2, respectively. Table 1 Basic parameters of the hand-pushing track of steel structure Project unit value Orbital height m ≥ 2.5 Profile steel size mm ≥ 40 × 4 Project unit value Hanger spacing mm 600 ~ 800 Track load deflection % ≤0.15 Table 2 Basic parameters of the steel pipe structure hand push track Project unit value Orbital height m ≥ 2.5 Steel pipe size mm 60×3 Project unit value Hanger spacing mm 600 ~ 800 Track load deflection % ≤0.154 Technical requirements4.1 Raw materials, purchased parts, and outsourced parts The inspection certificate or quality assurance certificate of the supplier shall be available, or it shall be inspected by the manufacturer and shall be used only after passing the test. 4.2 The bearing capacity should be greater than or equal to 1.5 times the maximum load, and the hanger density is uniform. 4.3 The ballast joint should be smoothly transitioned, and there should be no blockage when the load-bearing pulley passes. 4.4 Appearance 4.4.1 The coating on the outer surface of the equipment shall have uniform color, strong adhesion and no sag, and shall comply with the provisions of GB/T 13912. 4.4.2 The track surface is flat and smooth, and there should be no distortion, sharp bends and unevenness. ...... |
