RB/T 114-2023 English PDFUS$999.00 ยท In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email. RB/T 114-2023: Energy management system - Requirements for certification on chemical enterprises manufacturing sodium carbonate, coking, rubber and plastic products and pharmaceuticals etc. Status: Valid RB/T 114: Historical versions
Basic dataStandard ID: RB/T 114-2023 (RB/T114-2023)Description (Translated English): Energy management system - Requirements for certification on chemical enterprises manufacturing sodium carbonate, coking, rubber and plastic products and pharmaceuticals etc. Sector / Industry: Chinese Industry Standard (Recommended) Classification of Chinese Standard: F01 Classification of International Standard: 27.010 Word Count Estimation: 50,571 Date of Issue: 2023-10-16 Date of Implementation: 2023-12-01 Older Standard (superseded by this standard): RB/T 114-2014 Issuing agency(ies): National Certification and Accreditation Administration RB/T 114-2023: Energy management system - Requirements for certification on chemical enterprises manufacturing sodium carbonate, coking, rubber and plastic products and pharmaceuticals etc.---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 27:010 CCSF01 Certification and Accreditation Industry Standards of the People's Republic of China Replaces RB/T 114-2014 Energy Management System Soda ash, coking, rubber and plastic products, pharmaceuticals, etc: Chemical Enterprise Certification Requirements Released on 2023-10-16 2023-12-01 Implementation The National Certification and Accreditation Administration issued Published by China Standards Press Table of ContentsPreface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 The environment in which the enterprise is located 1 5 Leadership 3 6 Planning 3 7 Support 8 8 Run 9 9 Performance Evaluation11 10 Improvement 12 Appendix A (Informative) Basic information on energy management in chemical enterprises such as soda ash, coking, rubber and plastic products, and pharmaceuticals 13 Appendix B (Informative) Commonly used laws, regulations, standards and other relevant information on energy management in chemical enterprises such as soda ash, coking, rubber and plastic products, and pharmaceuticals Required Documents List 32 Appendix C (Informative) Application examples of energy management system requirements for chemical enterprises such as soda ash, coking, rubber and plastic products, and pharmaceuticals --- Energy Judges 36 References 42 Figure A:1 Schematic diagram of the ammonia-soda process 14 Figure A:2 Schematic diagram of the combined alkali production process 15 Figure A:3 Schematic diagram of the natural alkali process 16 Figure A:4 Schematic diagram of heavy soda ash process flow chart16 Figure A:5 Schematic diagram of typical tire process flow 18 Figure A:6 Schematic diagram of a typical coking enterprise production process flow chart 20 Figure A:7 Schematic diagram of plastic processing (granulation) process flow 22 Figure A:8 Injection molding process flow chart 22 Figure A:9 Blow molding (extrusion) molding process flow chart 22 Figure A:10 Extrusion molding process flow chart 22 Figure A:11 Schematic diagram of typical production process flow of dry process (release paper process) synthetic leather 23 Figure A:12 Schematic diagram of typical production process of wet synthetic leather 23 Figure A:13 Schematic diagram of the process flow of pesticide APIs and pesticide intermediates 24 Figure A:14 Schematic diagram of a typical process flow of pesticide formulation 25 Figure A:15 Schematic diagram of typical process flow of pharmaceutical intermediates 26 Figure A:16 Schematic diagram of the production process of fermentation drugs (such as penicillin) 27 Figure A:17 Schematic diagram of the production process of aspirin 28 Figure A:18 Schematic diagram of dye process flow 29 Figure A:19 Schematic diagram of rubber adhesive process flow 30 Table B:1 Commonly used laws, regulations and other requirements for energy management in chemical enterprises such as soda ash, coking, rubber and plastic products, and pharmaceuticals 32 Table B:2 Main standard catalogues for energy management in chemical enterprises such as soda ash, coking, rubber and plastic products, and pharmaceuticals 33 Table C:1 Energy types and energy use processes in 2020 36 Table C:2 Data and proportion of various energy consumption in 202037 Table C:3 Comparison of unit product consumption of various energies in 2020 and:2019 37 Table C:4 Limit values, advanced values and actual values of unit product energy consumption of existing soda ash production equipment in the past two years (light soda ash by combined soda process) Contrast 38 Table C:5 List of main energy-consuming equipment 38 Table C:6 Examples of variables related to major energy use 39 Table C:7 Summary of energy metering devices 40 Table C:8 Plant-level energy performance parameter improvement targets 41ForewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting: This document is GB/T 23331-2020 "Energy Management System Requirements and Use Guide" in soda ash, rubber products, plastic products (including The specific requirements for the application of chemical enterprises such as finished leather, coking chemicals, dyes, pesticides, pharmaceutical intermediates, and pharmaceuticals are a revision of GB/T 23331-2020: Refinement: This document replaces RB/T 114-2014 "Energy Management System Certification Requirements for Soda Ash, Coking, Rubber and Plastic Products, Pharmaceutical and Other Chemical Enterprises" Compared with RB/T 114-2014, in addition to structural adjustments and editorial changes, the main technical changes are as follows: a) The structure, core technical elements, common terms and definitions of GB/T 23331-2020 are adopted; b) Added the environment in which the enterprise is located (see 4:1); c) Management representative has been deleted (see 4:2:2 of the:2014 edition); d) added measures to address risks and opportunities (see 6:1); e) Added planning for energy data collection (see 6:6); f) Added improvements (see 10:3); g) The scope of the management system has been changed (see 4:3, 4:1:2 of the:2014 edition); h) Changed the energy review (see 6:3, 4:4:3 of the:2014 edition); i) The energy performance parameters have been changed (see 6:4, 4:4:5 of the:2014 edition); j) Changed the energy benchmark (see 6:5, 4:4:4 of the:2014 edition); k) Changes have been made to operational planning and control (see 8:1, 8:2, 8:3, and 4:5:5, 4:5:6, and 4:5:7 of the:2014 edition): Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents: This document is proposed and coordinated by the Certification and Accreditation Administration of the People's Republic of China: This document was drafted by: Beijing Sinochem United Certification Co:, Ltd:, China Petroleum and Chemical Industry Federation, China Soda Ash Industry Association, China Pesticide Industry Association, China Chemical Energy Conservation Technology Association, Nanjing Red Sun Biochemistry Co:, Ltd:, Hankook Tire Co:, Ltd:, Tianjin Bohai Yongli Chemical Co:, Ltd:, Shanxi Everbright Coking Gas Source Co:, Ltd:, Shanxi Tianxing Coal Gasification Co:, Ltd:, Huaxia Certification Center Co:, Ltd:, Shandong Luyuan Energy Conservation Certification Technology Engineering Co:, Ltd:, Beijing World Standard Certification Center Co:, Ltd:, Fangyuan Mark Certification Group Co:, Ltd: Co:, Ltd:, Beijing Samsung Jiuqian Certification Center Co:, Ltd: The main drafters of this document are: Xu Chao, Xie Hua, Chen Peiyun, Li Yongliang, Yu Hongying, Dong Guangda, Bi Chao, Jin Guogang, Chen Jizhen, Yang Kaijiu, Huang Jinwang, Wu Xuebin, Wang Yaolong, Ni Hongbing, Zhang Wen, Yao Qin, Qi Lili, Wang Chunyan, Zhang Lin, Yang Xiaoying, Li Dongyue: The previous versions of this document and the documents it replaces are as follows: ---First published in:2014 as RB/T 114-2014; ---This is the first revision: Energy Management System Soda ash, coking, rubber and plastic products, pharmaceuticals, etc: Chemical Enterprise Certification Requirements1 ScopeThis document specifies the energy management system for chemical enterprises such as soda ash, coking, rubber and plastic products, and pharmaceuticals (hereinafter referred to as "soda ash and other enterprises"): Require: This document is applicable to the establishment, implementation, maintenance and continuous improvement of the energy management system of soda ash and other enterprises: Energy management system certification: It is used as a reference for other relevant parties to evaluate the energy management system of soda ash and other enterprises:2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document: For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document: GB/T 2589 General rules for calculation of comprehensive energy consumption GB 17167 General rules for the allocation and management of energy metering instruments in energy-consuming units GB/T 21367 Requirements for the allocation and management of energy metering instruments in chemical enterprises GB/T 23331-2020 Energy Management System Requirements and Usage Guide3 Terms and definitionsThe terms and definitions defined in GB/T 23331-2020 and GB/T 2589 apply to this document: 4: The environment in which the enterprise is located 4:1 Understanding the organization and its environment 4:1:1 Enterprises should comply with the requirements of 4:1 of GB/T 23331-2020: 4:1:2 The enterprise shall identify the internal and external factors (positive or negative) that affect its energy performance and energy management system: a) External factors include: ---National, local, industry, and superior unit goals, requirements, or standards, such as: energy control indicators issued by the competent authorities, unit Product energy consumption limit standards, elimination of outdated processes and high-energy-consuming equipment, etc:; --- The cost or availability of the main energy sources used, the use of renewable energy, etc:; --- Environmental and climatic factors, such as high temperature, sudden weather, etc:; ---Others, such as the impact of global greenhouse gases, carbon emissions trading, carbon peak, carbon neutrality, etc: b) Internal factors include: ---Mission, vision and development strategy; ---Human resources, finance, energy costs, etc:; ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of RB/T 114-2023_English be delivered?Answer: Upon your order, we will start to translate RB/T 114-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of RB/T 114-2023_English with my colleagues?Answer: Yes. The purchased PDF of RB/T 114-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version RB/T 114-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version RB/T 114-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
