LY/T 2714-2016 English PDFUS$259.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. LY/T 2714-2016: Wood-plastic composite door casing Status: Valid
Basic dataStandard ID: LY/T 2714-2016 (LY/T2714-2016)Description (Translated English): Wood-plastic composite door casing Sector / Industry: Forestry Industry Standard (Recommended) Classification of Chinese Standard: B70 Classification of International Standard: 79.060 Word Count Estimation: 11,155 Date of Issue: 2016-07-27 Date of Implementation: 2016-12-01 Regulation (derived from): State Forestry Administration Announcement No.17 of 2016; Industry Standard Announcement No.16 of 2016 (No.204) Issuing agency(ies): State Forestry Administration LY/T 2714-2016: Wood-plastic composite door casing---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.(Wooden plastic door sets) ICS 79.060 B70 People's Republic of China Forestry Industry Standard Wood plastic door line Released on.2016-07-27 Implementation of.2016-12-01 State Forestry Administration released ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. Please note that some of the contents of this document may involve patents. Publication of this document The organization is not responsible for identifying these patents. This standard is proposed and managed by the National Forestry Biomass Materials Standardization Technical Committee (SAC/TC416). This standard was drafted. International Bamboo and Rattan Center, Huazhong Agricultural University, Hubei Ainin Wood Plastic Products Co., Ltd., Hubei Sanmu Wood Plastic Technology Limited company. The main drafters of this standard. Wang Hankun, Xiong Hanguo, Yu Yan, Fei Peng, Ren Dan, Song Jianjun, Gui Sibin, Cai Jie, Tan Jun. Wood plastic door line1 ScopeThis standard specifies the terms and definitions, requirements, inspection methods, inspection rules, and marking, packaging, transportation and storage of wood-plastic door line. This standard is applicable to woody plant materials such as wood, bamboo and crop straw as fillers or reinforcing materials (minimum proportion) 10%), based on thermoplastic polymer plastics (PVC, PP, PE, etc.), after molding, water-based or oily plastic film (or no film) The wood-plastic door line for the decorative wire covered by the door frame.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 2828.1-2012.Sampling procedures for sampling by sampling - Part 1 . Batch-by-batch inspections by Retrieving Quality of Acceptance (AQL) plan GB/T 15102-2006 impregnated film paper veneer wood-based panel GB/T 17657-2013 Test method for physical and chemical properties of wood-based panels and veneered panels GB/T 19367-2009 Determination of the size of wood-based panels GB/T 24137-2009 wood plastic decorative board GB/T 24508-2009 wood plastic floor3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Wood plastic door line wood-plasticcompositedoorcasing Woody botanical raw materials such as wood, bamboo, crop straw, etc. are used as fillers or reinforcing materials (minimum addition ratio of 10%), with high thermoplasticity Molecular plastics (PVC, PP, PE, etc.) are used as substrates, which are formed by processes such as molding, water-based or oily film-coated film (or film-free). Decorative wire covered in the door frame. 3.2 Perviousspotsofcoveringlayer Defects appearing on the surface of the substrate due to local missing or too thin coating. 3.3 Crashing dents The product causes a serrated defect such as tearing of the edge of the material during the cutting process. 3.4 Bubbling blisters The surface of the product contains abnormal protrusions caused by gas. 3.5 Drum kit inclusions The surface of the product contains abnormal protrusions caused by solid objects. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 2714-2016_English be delivered?Answer: Upon your order, we will start to translate LY/T 2714-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of LY/T 2714-2016_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 2714-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
