LY/T 2013-2012 English PDF

US$369.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
LY/T 2013-2012: Measurement of forest fuel
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
LY/T 2013-2012	369	Add to Cart	3 days	Measurement of forest fuel	Valid

Similar standards

LY/T 2407   LY/T 1184   LY/T 1650   LY/T 2006   LY/T 2009   LY/T 2004   

Basic data

Standard ID: LY/T 2013-2012 (LY/T2013-2012)
Description (Translated English): Measurement of forest fuel
Sector / Industry: Forestry Industry Standard (Recommended)
Classification of Chinese Standard: B65
Classification of International Standard: 65.020
Word Count Estimation: 14,159
Quoted Standard: LY/T 1211; LY/T 1268
Regulation (derived from): State Forestry Administration Notice 2012 No. 5; industry standard filing Notice 2012 No. 4 (No. 148 overall)
Issuing agency(ies): State Forestry Administration
Summary: This standard specifies the fuel moisture, load, ignition, calorific value, ash content, extract measured approach. This standard applies to forest fuel measurement.

LY/T 2013-2012: Measurement of forest fuel

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Measurement of forest fuel ICS 65.020 B65 People's Republic of China Forestry Industry Standard Determination of forest combustibles Published on.2012-02-23 2012-07-01 implementation State Forestry Administration released

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard was proposed by the Forest Fire Prevention Office of the State Forestry Administration. This standard is under the jurisdiction of the National Forest Fire Protection Standardization Technical Committee. This standard was drafted. Heilongjiang Provincial Forest Protection Research Institute. The main drafters of this standard. Du Jialin, Zhang Jingzhong, Sun Jiabao, Zhang Mingwen, Guo Yingtao, Wei Yunmin, Du Jianhua, Xiao Fei, Yao Shuren, Xiao Gongwu. Determination of forest combustibles

1 Scope

This standard specifies the method for determining the moisture content, load, ignition point, calorific value, ash content and extract of combustibles. This standard applies to the determination of forest combustibles.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. Collection and preparation of LY/T 1211 forest plants (including forest litter layer) LY/T 1268 Determination of coarse ash in forest plants and forest litter layer

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Forest flammable forestfuel Organic matter that can be burned in a forest environment. 3.2 Wet weight wetfuelquality The quality of combustibles collected in the forest environment. 3.3 Dry weight dryfuelquality The quality of combustibles after baking to lose moisture. 3.4 Combustible water content fuelmoisturecontent An indicator of the degree of dryness and wetness of combustibles, which is the percentage of the amount of water contained in combustibles and its dry weight. 3.5 Combustible load fuelload The absolute dry mass of all combustibles per unit area.

4 Collection and preservation of combustible samples

4.1 Combustible sample collection During the forest fire prevention period, select the typical site type to set up the plot (100m×100m), and randomly set 5 plots in the plot (10m× 10m); randomly set 5 sample squares (1m×1m) in the sample set, and collect all combustibles in the sample sample according to the combustible classification method. And weigh the sample; collect representative sample of combustibles as a sample, generally between 50g~100g, placed in the weighing bag, at the same time The wet weight of the sample was weighed in time; fill in the measurement results and survey data to the Appendix A Forest Fuels Survey. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of LY/T 2013-2012_English be delivered?

Answer: Upon your order, we will start to translate LY/T 2013-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of LY/T 2013-2012_English with my colleagues?

Answer: Yes. The purchased PDF of LY/T 2013-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.