LY/T 1911-2010 English PDF

US$349.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
LY/T 1911-2010: Technical regulation for potted cyclamen production

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
LY/T 1911-2010	349	Add to Cart	3 days	Technical regulation for potted cyclamen production

Similar standards

LY/T 2407   GB/T 30762   LY/T 1650   LY/T 3367   LY/T 3368   LY/T 3366   

Basic data

Standard ID: LY/T 1911-2010 (LY/T1911-2010)
Description (Translated English): Technical regulation for potted cyclamen production
Sector / Industry: Forestry Industry Standard (Recommended)
Classification of Chinese Standard: B62
Classification of International Standard: 65.020.20
Word Count Estimation: 10,199
Date of Issue: 2010-02-09
Date of Implementation: 2010-06-01
Quoted Standard: GB/T 18247.2-2000; LY/T 1589-2000
Regulation (derived from): State Forestry Administration Notice 2010 No. 2; industry standard filing Notice 2010 No. 5 (No. 125 overall)
Issuing agency(ies): State Forestry Administration
Summary: This standard specifies the cyclamen potted planting seedlings, seedling cultivation pots, flower cultivation, pest and disease control, quarantine packaging identifies the specific requirements. This standard applies to the conditions of greenhouses with heating cyclamen flower production. This standard applies to the New Year and Spring Festival period listed potted cyclamen finished production, other times listed refer to the standard of the finished flowers followed by various stages of projections.

LY/T 1911-2010: Technical regulation for potted cyclamen production

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical regulation for potted cyclamen production ICS 65.020.20 B62 People's Republic of China Forestry Industry Standard Cyclamen potted flower production technical regulations Released on.2010-02-09 2010-06-01 implementation State Forestry Administration released

Foreword

This standard is proposed and managed by the National Flower Standardization Technical Committee. This standard was drafted. Tianjin Landscaping Research Institute, Tianjin Forestry Workstation. The main drafters of this standard. Jiang Shiping, Fu Xinsheng, Li Yujun, Du Changcheng, Li Wubao, Zhao Wanzhen, Zou Meng, Liu Huanxin, Wang Haixia. Cyclamen potted flower production technical regulations

1 Scope

This standard specifies the specific requirements for cyclamen seedling cultivation, pot seedling cultivation, pot flower cultivation, pest control, and quarantine packaging. This standard is applicable to the production of cyclamen potted plants in greenhouses with heating conditions. This standard is applicable to the production of cyclamen finished potted plants listed during the New Year's Day and the Spring Festival. The finished products listed at other times refer to the various stages of this standard. The segments are calculated in turn.

2 Normative references

The terms of the following documents become the terms of this standard by reference to this standard. All dated references, followed by all repairs Changes to the order (excluding the content of the errata) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study whether The latest version of these files is available. For undated references, the latest edition applies to this standard. GB/T 18247.2-2000 Main flower product grades Part 2. Potted flowers LY/T 1589-2000 Flower Terminology

3 Terms and definitions

The terms and definitions established in LY/T 1589-2000 and the following terms apply to this standard 3.1 The flower buds are basically the same size and the total number of flower buds that can bloom at the same time. It is an important indicator to measure the quality of cyclamen.

4 sowing seedlings

4.1 Preparation before sowing 4.1.1 Seeding container A plastic seedling tray of 57 cm x 22 cm x 5 cm or a tray of 128 holes should be used. Soak the container at 0.1% high 5 days before sowing Disinfect in potassium manganate solution for 30 min. 4.1.2 Nursery area The seedling area such as the ground, countertops and walls should be disinfected before sowing. 4.1.3 Matrix preparation Peat with a particle size of ≤0.5 cm is selected, and after disinfection, it is mixed in a ratio of grass charcoal. vermiculite (or perlite) = 7.3. 1m3 mixed Add 100g of potassium nitrate, 300g of superphosphate, and 300g of compound fertilizer of nitrogen, phosphorus and potassium, mix well with water, control the water content of the substrate. The amount is 40% to 50%, the pH is 6.2 to 6.5, and the EC value is 0.5 to 0.7. The bag is sealed and ready for use. Other materials should be tested first. After inspection, it can be used after passing the test. 4.1.4 Seed selection The full, mold-free seeds harvested in the year should be selected. Seed 1000-grain weight should meet the standard (large flower variety seed ≥11g, medium flower variety Seeds ≥9g, micro-species seeds ≥7g). Seed germination test should be randomly sampled 40 days before sowing, and the germination rate can reach 85%. use. 4.1.5 Seed treatment Seed treatment should be carried out before sowing. The seeds were immersed in 500 times of carbendazim for 5 min one day before sowing, and then taken out and placed. Soak in the water for 40h in 40°C water. Direct seeding can be carried out using coated seeds. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of LY/T 1911-2010_English be delivered?

Answer: Upon your order, we will start to translate LY/T 1911-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of LY/T 1911-2010_English with my colleagues?

Answer: Yes. The purchased PDF of LY/T 1911-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.