LY/T 1891-2010 English PDFUS$319.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. LY/T 1891-2010: Technical regulations of cutting propagation for pinus elliottii×P.caribaea
Basic dataStandard ID: LY/T 1891-2010 (LY/T1891-2010)Description (Translated English): Technical regulations of cutting propagation for pinus elliottii��P.caribaea Sector / Industry: Forestry Industry Standard (Recommended) Classification of Chinese Standard: B61 Classification of International Standard: 65.020.20 Word Count Estimation: 9,940 Date of Issue: 2010-02-09 Date of Implementation: 2010-06-01 Quoted Standard: GB 6000; GB/T 6001; GB/T 16620; LY/T 1000 Regulation (derived from): State Forestry Administration Notice 2010 No. 2; industry standard filing Notice 2010 No. 5 (No. 125 overall) Issuing agency(ies): State Forestry Administration Summary: This standard specifies the wet Hondurensis seed seedling nursery cuttings planning, cutting propagation, seedlings Chupu requirements. This standard applies to wet Hondurensis scale seed seedling cuttings. LY/T 1891-2010: Technical regulations of cutting propagation for pinus elliottii×P.caribaea---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Technical regulations of cutting propagation for pinus elliottii×P.caribaea ICS 65.020.20 B61 People's Republic of China Forestry Industry Standard Technical regulations for cutting propagation of wet pine varieties Released on.2010-02-09 2010-06-01 implementation State Forestry Administration released ForewordThis standard was proposed by the Guangdong Academy of Forestry Science and Technology. This standard is under the jurisdiction of the National Forest Seed Standardization Technical Committee. This standard is drafted by. Guangdong Forestry Research Institute, Guangdong Forestry Seed and Base Management Headquarters, Taishan City, Guangdong Province Ling Seed Garden. Participated in the drafting of this standard. Nanjing Forestry University. The main drafters of this standard. Chen Junguang, Zhao Fencheng, Xu Songkui, Liu Shipong, Lin Changming, Zhang Yingzhong, Situ Ronggui, Shen Yongbao. Technical regulations for cutting propagation of wet pine varieties1 ScopeThis standard stipulates the requirements for nursery land planning, cutting propagation techniques, seedling emergence and other requirements in the cutting seedlings of wet pine seedlings. This standard is applicable to large-scale cutting propagation of wet pine seedlings.2 Normative referencesThe terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard. GB 6000 Main afforestation tree seedling quality grading GB/T 6001 nursery technical regulations GB/T 16620 Forest Tree Breeding and Seed Management Terminology LY/T 1000 container seedling technology3 Terms and definitionsThe following terms and definitions established in GB/T 16620 apply to this standard. 3.1 Wetland pine is the female parent, and Caribbean pine is the male parent. 3.2 Provide the original plants of the cuttings. 3.3 Seedlings produced by cutting propagation through cuttings.4 nursery planning4.1 Nursery site selection The planning and construction of the nursery shall be carried out in accordance with the provisions of GB/T 6001. Choose the terrain is gentle, the drainage is good, the light and water source are sufficient, the soil layer is thicker than 50cm, the soil is loose and breathable, and the soil pH is 5.5~ 6.5, no pollution nearby, convenient transportation, where there is power supply to do the depression. 4.2 Regional division 4.2.1 Partition The nursery is divided into two major categories of production and auxiliary facilities according to the function of the facility. The production is divided into. picking hoes, cuttings (simple greenhouses or Shade sheds, refining nurseries; auxiliary facilities include matrix storage preparation area, agricultural material storage area, office living area and protection system, road system, drainage system System, water supply system. The arrangement of each zone should meet the needs of the production process and facilitate the operation. 4.2.2 Area of each functional area The area of each functional area of the nursery should be determined according to the annual production of seedlings. The area of nursery production area with an annual output of 1 million plants should reach 3.5hm2, in which the ratio of the area between the seedlings, the cuttings and the nursery is 4.1.2; the annual production of more than 1 million nurseries, ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 1891-2010_English be delivered?Answer: Upon your order, we will start to translate LY/T 1891-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of LY/T 1891-2010_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 1891-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
