LY/T 1888-2010 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
LY/T 1888-2010: Technical regulations of cutting propagation for eucalyptus urophylla

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
LY/T 1888-2010	209	Add to Cart	3 days	Technical regulations of cutting propagation for eucalyptus urophylla

Similar standards

LY/T 2407   GB/T 30762   LY/T 1650   LY/T 3345   LY/T 1773   LY/T 1941   

Basic data

Standard ID: LY/T 1888-2010 (LY/T1888-2010)
Description (Translated English): Technical regulations of cutting propagation for eucalyptus urophylla
Sector / Industry: Forestry Industry Standard (Recommended)
Classification of Chinese Standard: B61
Classification of International Standard: 65.020.20
Word Count Estimation: 6,698
Date of Issue: 2010-02-09
Date of Implementation: 2010-06-01
Quoted Standard: GB 6000; GB/T 6001; GB/T 16620; LY/T 1000
Regulation (derived from): State Forestry Administration Notice 2010 No. 2; industry standard filing Notice 2010 No. 5 (No. 125 overall)
Issuing agency(ies): State Forestry Administration
Summary: This standard specifies the urophylla clones cutting propagation Scion construction, nursery cuttings, seedlings Chupu and file creation and other technical requirements. This standard applies that is certified or validated Eucalyptus, grandis and Eucalyptus grandis clones cultivated area cutting propagation.

LY/T 1888-2010: Technical regulations of cutting propagation for eucalyptus urophylla

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical regulations of cutting propagation for eucalyptus urophylla ICS 65.020.20 B61 People's Republic of China Forestry Industry Standard Techniques for cutting propagation of caudate lobe Released on.2010-02-09 2010-06-01 implementation State Forestry Administration released

Foreword

Appendix A of this standard is an informative annex. This standard was proposed by the Guangdong Forestry Seedlings and Base Management Station. This standard is under the jurisdiction of the National Forest Seed Standardization Technical Committee. This standard was drafted. Guangdong Forestry Seedlings and Base Management Station. Participated in this standard. Forestry College of South China Agricultural University, Nanjing Forestry University. The main drafters of this standard. Liu Sitong, Huang Yongfang, Chen Junguang, Xu Songkui, Yu Fangyuan, Mei Jiena, Xie Jinlian, Liu Tianqi, Huang Shaowei, Liu Chunxin, Li Xiangyun, Liao Guochun, Liu Jun. Techniques for cutting propagation of caudate lobe

1 Scope

And technical requirements such as file establishment.

2 Normative references

The terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all Modifications (not including errata content) or revisions do not apply to this standard. However, parties to agreements based on this standard are encouraged to Whether the latest version of these files can be used. For undated references, the latest edition applies to this standard. GB 6000 Main afforestation tree seedling quality grading GB/T 6001 nursery technical regulations GB/T 16620 Forest Tree Breeding and Seed Management Terminology LY/T 1000 container seedling technology

3 Terms and definitions

The following terms and definitions established by GB/T 16620 apply to this standard. 3.1 A clonal clonal in a sorghum, specially used for collecting the female parent of the cuttings.

4 Mining and harvesting

4.1 Selection The planning and construction of picking hoes shall be carried out in accordance with GB/T 6001. You should choose convenient transportation, flat terrain or gentle slope, close to Qing Clean water source, well-drained place; avoid low-lying water. The soil is preferably fertile and moist sandy loam, loam or light clay. 4.2 Preparation for bed The seedbed requires comprehensive deep ploughing, fine soil preparation, uniform soiling, and removal of grass roots and stones. When the soil is prepared, the fermented organic fertilizer is applied, and the amount of fertilizer applied is 4500kg/hm2～6000kg/hm2, layered and distributed evenly. When making a bed, the bed surface needs to be flat, and the bed size is 100cm~120cm. It is 15cm to 25cm high and 40cm wide. The soil was disinfected before planting and sprayed on the bed with 0.3% to 0.5% potassium permanganate. The acidic soil can be uniformly applied by combining quicklime and ploughing, and the dosage is 2500kg/hm2 to 3000kg/hm2. 4.3 Source of materials for the seedling plants The seedling plants should adopt the excellent cloned tissue culture seedlings that have been examined or confirmed, and the seedling height is 8cm~15cm. It is forbidden to use cuttings. 4.4 Planting Planting time is summer, should be selected early, late or rainy days. Planting plant spacing 25cm × 25cm or 25cm × 30cm, planting The depth is the rhizome of the plant, and it is drenched in time after planting. 4.5 Plastic trimming Plants are planted for about 15 days, and after harvesting, they are topped, or cut at 4cm to 6cm of 2 to 3 pairs of true leaves; Cut off long branches, mechanical damage branches, and weak lateral branches. After the first shoots were cut from the main shoot for 10d to 12d, the sprouts of the plant stayed piles grew to ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of LY/T 1888-2010_English be delivered?

Answer: Upon your order, we will start to translate LY/T 1888-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of LY/T 1888-2010_English with my colleagues?

Answer: Yes. The purchased PDF of LY/T 1888-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.