LY/T 1884-2010 English PDF
Basic dataStandard ID: LY/T 1884-2010 (LY/T1884-2010)Description (Translated English): Implantation and management technical regulations for walnut varieties (Juglans regia L.) Sector / Industry: Forestry Industry Standard (Recommended) Classification of Chinese Standard: B64 Classification of International Standard: 65.020 Word Count Estimation: 8,89 Date of Issue: 2010-02-09 Date of Implementation: 2010-06-01 Quoted Standard: GB 4285-1989; GB 8321; GB/T 20398-2006; NY/T 441-2001; NY/T 442-2001; NY/T 970-2006 Regulation (derived from): Industry standard filing Notice 2010 No. 5 (No. 125 overall) Issuing agency(ies): State Forestry Administration Summary: This standard specifies the site selection and planning, soil preparation, planting, transplanting management, pruning, water, soil and fertilizer management, pest control and other fine varieties of nuts, walnut harvest yield cultivation management techniques. This standard applies to Walnut Branch (Juglandaceae), Walnut. LY/T 1884-2010: Implantation and management technical regulations for walnut varieties (Juglans regia L.)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Implantation and management technical regulations for walnut varieties (Juglans regia L.) ICS 65.020 B64 People's Republic of China Forestry Industry Standard Technical regulations for high-yield cultivation management of walnut varieties Released on.2010-02-09 2010-06-01 implementation State Forestry Administration released ForewordAppendix A of this standard is an informative annex. This standard was proposed by the Forestry Research Institute of the Chinese Academy of Forestry. This standard is under the jurisdiction of the State Forestry Administration. This standard was drafted. Forestry Research Institute of Chinese Academy of Forestry. The main drafters of this standard. Zhang Junpei, Ji Dong, Ma Qingguo, Gao Ying. Technical regulations for high-yield cultivation management of walnut varieties1 ScopeThis standard specifies garden selection and planning, land preparation, planting, post-plant management, plastic trimming, soil and water management, pest control and nuts. High-yield cultivation and management techniques for harvesting and other excellent varieties of walnuts.2 Normative referencesThe terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard. GB 4285-1989 Safety standards for pesticide use GB 8321 (all parts) Guidelines for the rational use of pesticides GB/T 20398-2006 walnut nut quality grade NY/T 441-2001 Apple Production Technical Regulations NY/T 442-2001 Pear Production Technical Regulations NY/T 970-2006 technical regulations for production of jujube3 Garden selection and planning3.1 Garden selection 3.1.1 Climatic conditions The annual average temperature is 8°C～16°C, the absolute minimum temperature is ≥-25°C, the absolute maximum temperature is ≤38°C, and the frost-free period is 150d～240d. The annual sunshine hours are ≥2000h, and the annual rainfall is 400mm~1000mm. 3.1.2 Site conditions Choose a leeward sunny zone between 30° and 40° north latitude, slope ≤20°, altitude ≤1200m, soil thickness ≥1.0m, good permeability Sandy loam, light loam and loam, pH 6.5 ~ 8.5. 3.2 Garden Planning Before the establishment of the park, the orchard house construction, road construction, irrigation and drainage facilities, shelter forest layout, etc. were planned and designed, and the plan was drawn.4 Soil preparation4.1 Land preparation method Plane to dig 0.6m×0.6m×0.6m～1m×1m×1m tree hole; build a garden on gentle slope and dig 0.8m along the contour line× The 0.8m×0.8m～1m×1m×1m tree hole is gradually modified into terraces after planting. 4.2 Applying base fertilizer The excavated topsoil is mixed with enough organic fertilizer, and it is filled in the hole. After filling 20cm below the surface, it is filled with water, solidified and covered with topsoil.5 planting5.1 Planting varieties Select suitable varieties according to local photothermal and water and fertilizer conditions (see Appendix A). Planting seedlings to choose grafted seedlings, the quality should be reached Level 1. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 1884-2010_English be delivered?Answer: Upon your order, we will start to translate LY/T 1884-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of LY/T 1884-2010_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 1884-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
