LY/T 1804-2008 English PDF
Basic dataStandard ID: LY/T 1804-2008 (LY/T1804-2008)Description (Translated English): Acceptance generality of the gypsum particle board production line Sector / Industry: Forestry Industry Standard (Recommended) Classification of Chinese Standard: B97 Classification of International Standard: 79.120.01 Word Count Estimation: 8,823 Date of Issue: 2008-09-03 Date of Implementation: 2008-12-01 Quoted Standard: GBJ 131; GB 3095; GB 5226.1; GB 8978; GB 12348; GB/T 13306; GB/T 18262; GB/T 18514; GB 50235; GB 50254; GB 50275; JB/T 9953; LY/T 1598 Regulation (derived from): Industry standard filing Notice No. 10 of 2008 Issuing agency(ies): State Forestry Administration Summary: This standard specifies the gypsum particleboard production line equipment, associated piping, electrical equipment, automation and other technical requirements, equipment, air running test, test strip production line, equipment testing benchmarks and testing methods. This standard applies to the substrate plaster, wood shavings (wood or non-wood) as reinforcing material for semi-dry plaster particleboard production line. LY/T 1804-2008: Acceptance generality of the gypsum particle board production line---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Acceptance generality of the gypsum particle board production line ICS 79.120.01 B97 People's Republic of China Forestry Industry Standard General rules for the acceptance of gypsum particleboard production line Released on.2008-09-03 2008-12-01 implementation State Forestry Administration released ForewordThis standard is proposed and managed by the National Technical Committee for Wood-based Panel Machinery Standardization. This standard was drafted by Sufuma Co., Ltd. The main drafters of this standard. Wang Xinnan, Tang Qi. General rules for the acceptance of gypsum particleboard production line1 ScopeThis standard specifies the technical requirements for the main equipment, auxiliary pipelines, electrical installations, and automation instruments of the gypsum particleboard production line. Transfer test, production line strip test, equipment test reference and test method. This standard applies to semi-dry gypsum particleboard production line with gypsum as substrate and shavings (wood or non-wood) as reinforcing material.2 Normative referencesThe terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard. GB J131 automated instrument installation engineering quality inspection and evaluation standards GB 3095 Ambient Air Quality Standard GB 5226.1 Mechanical safety machinery and electrical equipment - Part 1. General technical conditions (GB 5226.1-2002, IEC 60204- 1.2000, IDT) GB 8978 Integrated Wastewater Discharge Standard GB 12348 Environmental noise emission standards for industrial enterprises GB/T 13306 signage General technical conditions for GB/T 18262 wood-based panel machinery GB/T 18514 wood-based panel machinery safety rules GB 50235 Industrial metal pipeline engineering construction and acceptance specifications GB 50254 Electrical installation engineering Low-voltage electrical installation and acceptance specifications GB 50275 Compressor, fan, pump installation engineering construction and acceptance specifications JB/T 9953 Woodworking Machine Noise Acoustic (Pressure) Level Measurement Method LY/T 1598 plaster particle board3 requirements3.1 General technical requirements 3.1.1 All equipment, auxiliary pipelines, electrical installations, automation instruments, safety fire protection facilities, anti-static facilities, water, electricity, gas, liquid Pressure, heat, pneumatic conveying and ventilation dust removal systems, testing, inspection and environmental protection facilities shall be intact, and wood-based panel machinery shall comply with For the relevant provisions of GB/T 18262 and GB/T 18514, other equipment shall comply with the relevant standards or technical documents. 3.1.2 The technical data of the gypsum particleboard production line shall be complete, correct and unified, including. a) Process design specification, process flow chart, process layout drawing, section installation drawing, piping layout drawing, equipment basic drawing and equipment Fine table b) equipment master diagram, electrical schematic diagram, hydraulic schematic diagram, pneumatic schematic diagram, control system diagram and ventilation dust removal system diagram; c) water, electricity, steam, gas system diagram, lighting diagram, electrical layout diagram; d) Equipment supply list, packing list, equipment instruction manual, factory certificate of conformity and other drawings and technical documents supplied at random; e) relevant standards; f) Acceptance documents for fire protection, environmental protection, pressure vessels, etc.; g) Relevant documents, relevant documents for equipment installation, commissioning and production line acceptance. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 1804-2008_English be delivered?Answer: Upon your order, we will start to translate LY/T 1804-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of LY/T 1804-2008_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 1804-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
