LY/T 1802-2008 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
LY/T 1802-2008	319	Add to Cart	3 days	General specification for cement(gypsum)particle board press	Obsolete

Similar standards

LY/T 3022   GB/T 2818   LY/T 1346   LY/T 1286   LY/T 1031   LY/T 1011   

Basic data

Standard ID: LY/T 1802-2008 (LY/T1802-2008)
Description (Translated English): General specification for cement(gypsum)particle board press
Sector / Industry: Forestry Industry Standard (Recommended)
Classification of Chinese Standard: B97
Classification of International Standard: 79.120.99
Word Count Estimation: 8,885
Date of Issue: 2008-09-03
Date of Implementation: 2008-12-01
Quoted Standard: GB/T 191; GB/T 1184-1996; GB/T 3766; GB 5226.1; GB/T 7932; GB/T 13306; GB/T 13384; GB/T 18262
Regulation (derived from): Industry standard filing Notice No. 10 of 2008
Issuing agency(ies): State Forestry Administration
Summary: This standard specifies the cement (gypsum) particleboard press parameters, requirements, inspection rules and signs, packaging and storage. This standard applies to flat-pressure cold cement (gypsum) particleboard press.

LY/T 1802-2008: General specification for cement(gypsum)particle board press

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General specification for cement(gypsum)particle board press ICS 79.120.99 B97 People's Republic of China Forestry Industry Standard General technical conditions for cement (gypsum) particleboard presses Released on.2008-09-03 2008-12-01 implementation State Forestry Administration released

Foreword

This standard is proposed and managed by the National Technical Committee for Wood-based Panel Machinery Standardization. This standard was drafted. Harbin Forestry Machinery Factory. The main drafters of this standard. Li Ning, Yu Shanfu, Wu Heping, Li Hui. General technical conditions for cement (gypsum) particleboard presses

1 Scope

This standard specifies the parameters, requirements, inspection rules and signs, packaging and storage of cement (gypsum) particleboard presses. This standard is applicable to the press of cold pressing to produce cement (gypsum) particleboard.

2 Normative references

The terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard. GB/T 191 packaging storage and transportation pictorial signs (GB/T 191-2008, ISO 780.1997, MOD) GB/T 1184-1996 Shape and position tolerances without tolerance values (eqv ISO 2768-2.1989) GB/T 3766 hydraulic system general technical conditions (GB/T 3766-2001, eqv ISO 4413.1998) GB 5226.1 Mechanical safety machinery and electrical equipment - Part 1. General technical conditions (GB 5226.1-2002, IEC 60204- 1.2000, IDT) General technical conditions for GB/T 7932 pneumatic system (GB/T 7932-2003, ISO 4414.1998, IDT) GB/T 13306 signage General technical conditions for GB/T 13384 mechanical and electrical product packaging General technical conditions for GB/T 18262 wood-based panel machinery

3 sketch

A schematic diagram of the cement (gypsum) particleboard press structure is shown in Figure 1. 1---rack; 2---main cylinder; 3---active beam; 4---uplocking device; 5---mode-locking; 6---lower locking device; 7---lifting cylinder; 8---roller table; 9---mode-locking centering device; 10---locking frame; 11---pins. Note. This figure does not limit the specific structure of the cement (gypsum) particleboard press. Figure 1 Schematic diagram of cement (gypsum) particleboard press ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of LY/T 1802-2008_English be delivered?

Answer: Upon your order, we will start to translate LY/T 1802-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of LY/T 1802-2008_English with my colleagues?

Answer: Yes. The purchased PDF of LY/T 1802-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.