LY/T 1791-2008 English PDF
Basic dataStandard ID: LY/T 1791-2008 (LY/T1791-2008)Description (Translated English): Technical regulations for pulp-oriented bamboo stands Sector / Industry: Forestry Industry Standard (Recommended) Classification of Chinese Standard: B64 Classification of International Standard: 65.020 Word Count Estimation: 8,850 Date of Issue: 2008-09-03 Date of Implementation: 2008-12-01 Quoted Standard: GB/T 20391-2006 Regulation (derived from): Industry standard filing Notice No. 10 of 2008 Issuing agency(ies): State Forestry Administration Summary: This standard specifies the pulp of bamboo to create, nurture, protect the bamboo, bamboo harvesting, bamboo and bamboo production and other technical requirements and methods of investigation. This standard applies to the production of bamboo for bamboo pulp and paper. LY/T 1791-2008: Technical regulations for pulp-oriented bamboo stands---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Technical regulations for pulp-oriented bamboo stands ICS 65.020 B64 People's Republic of China Forestry Industry Standard Technical regulations for bamboo forest production Released on.2008-09-03 2008-12-01 implementation State Forestry Administration released ForewordThis standard was proposed by the Institute of Subtropical Forestry of the Chinese Academy of Forestry. This standard is under the jurisdiction of the National Bamboo and Rattan Standardization Technical Committee. This standard was drafted. Institute of Subtropical Forestry, Chinese Academy of Forestry, International Bamboo and Rattan Network Center, Fuyang City, Zhejiang Province Industry bureau. The main drafters of this standard. Ma Naixun, Zhang Wei, Tang Huaqin, Wang Yangdong, Yuan Jinling, Chen Guangcai, Zhang Wenyan. Technical regulations for bamboo forest production1 ScopeThis standard specifies the technical requirements for the construction and cultivation of bamboo forest for pulp, bamboo forest protection, bamboo harvesting, bamboo yield and bamboo forest survey. method. This standard applies to the production of bamboo as a bamboo forest for pulping and papermaking.2 Normative referencesThe terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard. GB/T 20391-2006 Bamboo production technology3 Terms and definitionsThe following terms and definitions apply to this standard. 3.1 Production of bamboo forest for bamboo used in pulp and papermaking. 3.2 The underground stem and shaft type, the whole bamboo is developed from the buds of the base of the mother bamboo stalk, and the bamboo stalks are distributed in clusters, or some of the shafts are scattered. The distribution of bamboo stalks is scattered. 3.3 The underground stem (commonly known as bamboo whip) is uniaxial or multi-axial, Hsinchu is developed from the bud on the bamboo whip, or the compound axis can have some Hsinchu from the stalk base. The buds are developed and the bamboo stalks are scattered. 3.4 The underground stem of uniaxial or multi-axial bamboo is composed of several nodes and internodes. It has buds on the nodes and can grow into Hsinchu or Hsinchu whip. 3.5 The shaft-type bamboo grows from the buds on the stalk base, and the uniaxial bamboo grows from the buds on the bamboo whip. The compound-type bamboo can be made from the bamboo whip. Bud differentiation on the bud or stalk base grows.4 Pulp bamboo forest construction4.1 Selection of afforestation sites The afforestation site should meet the following conditions. ---Soil. soil thickness 40cm or more, pH 4.5～7.5, loose, moist, well-drained loam, light sandy loam or light-viscosity Loam. ---Climate. The annual precipitation is more than 1000mm, and the annual precipitation in the dry-hot valley of Southwest China can be above 700mm; the annual average ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 1791-2008_English be delivered?Answer: Upon your order, we will start to translate LY/T 1791-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of LY/T 1791-2008_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 1791-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |