LY/T 1473-2008 English PDFLY/T 1473: Historical versions
Basic dataStandard ID: LY/T 1473-2008 (LY/T1473-2008)Description (Translated English): Iion remover Sector / Industry: Forestry Industry Standard (Recommended) Classification of Chinese Standard: B97 Classification of International Standard: 79.120.99 Word Count Estimation: 7,774 Date of Issue: 2008-09-03 Date of Implementation: 2008-12-01 Older Standard (superseded by this standard): LY/T 1473-1999 Quoted Standard: GB/T 191; GB 5226.1; GB/T 13306; GB/T 13384; GB/T 18262 Regulation (derived from): Industry standard filing Notice No. 10 of 2008 Issuing agency(ies): State Forestry Administration Summary: This standard specifies the separator parameter requirements, inspection rules and signs, packaging, transportation and storage. This standard applies to particleboard, fiberboard and other wood-based panel production separator. LY/T 1473-2008: Iion remover---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Iion remover ICS 79.120.99 B97 People's Republic of China Forestry Industry Standard Replacing LY/T 1473-1999 Iron remover Released on.2008-09-03 2008-12-01 implementation State Forestry Administration released ForewordThis standard replaces LY/T 1473-1999 "Magnetic Selector". The main differences between this standard and LY/T 1473-1999 are as follows. --- The standard name was changed to "Iron Remover"; --- In addition to the drum iron remover, a variety of forms of iron remover have been added. This standard is proposed and managed by the National Technical Committee for Wood-based Panel Machinery Standardization. This standard was drafted. Kunming Wood-based Panel Machinery Factory. The main drafters of this standard. Zhou Lin, Shi Jinuo, Yang Zezhong, Yang Qiong. The previous versions of the standards replaced by this standard are. ---ZBB97045-1988, LY/T 1473-1999. Iron remover1 ScopeThis standard specifies the parameters, requirements, inspection rules and signs, packaging, transportation and storage of iron remover. This standard is applicable to the iron remover for the production of wood-based panels such as particleboard and fiberboard.2 Normative referencesThe terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard. GB/T 191 packaging storage and transportation pictorial signs (GB/T 191-2008, ISO 780.1997, MOD) GB 5226.1 Mechanical safety machinery and electrical equipment - Part 1. General technical conditions (GB 5226.1-2002, IEC 60204- 1.2000, IDT) GB/T 13306 signage General technical conditions for GB/T 13384 mechanical and electrical product packaging General technical conditions for GB/T 18262 wood-based panel machinery3 classification3.1 The iron remover can be divided into roller type, belt type and non-self-discharging type according to the structure. 3.2 The iron remover can be divided into. permanent magnet type and electromagnetic type according to the magnetic pole characteristics. 3.3 According to the cooling method of electromagnetic iron remover, it can be divided into three types. air-cooled, oil-cooled and naturally cooled.4 sketch4.1 Self-unloading iron remover 4.1.1 Roller type electromagnetic iron remover The schematic diagram of the roller type electromagnetic iron remover is shown in Figure 1. 4.1.2 Belt type self-unloading iron remover Belt type self-unloading iron remover is divided into electromagnetic type and permanent magnet type. The schematic diagram of the structure of the belt type self-unloading electromagnetic iron remover is shown in Fig. 2. 4.2 Non-self-discharging iron remover (manually cleaned iron) Non-self-unloading iron removers are classified into air-cooled, oil-cooled, naturally cooled and permanent magnet types. Brief description of the structure of air-cooled electromagnetic iron remover Figure 3 shows. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 1473-2008_English be delivered?Answer: Upon your order, we will start to translate LY/T 1473-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of LY/T 1473-2008_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 1473-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version LY/T 1473-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version LY/T 1473-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
