LY/T 1416-2013 English PDFUS$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. LY/T 1416-2013: Wood laminated board for textile industry Status: Valid LY/T 1416: Historical versions
Basic dataStandard ID: LY/T 1416-2013 (LY/T1416-2013)Description (Translated English): Wood laminated board for textile industry Sector / Industry: Forestry Industry Standard (Recommended) Classification of Chinese Standard: B70 Classification of International Standard: 79.060.99 Word Count Estimation: 8,811 Older Standard (superseded by this standard): LY/T 1416-1999 Quoted Standard: GB/T 2828.1; GB/T 17657; GB/T 18259; GB/T 19367 Regulation (derived from): State Forestry Bulletin No. 14 of 2013 Issuing agency(ies): State Forestry Administration Summary: This standard specifies the fiber reinforced plastic laminates bolted squeeze strength tests - test equipment, test conditions, test procedures, formulas, test results and test reports. This standard applies to: carbon fiber, glass fiber, aramid fiber rei LY/T 1416-2013: Wood laminated board for textile industry---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Wood laminated board for textile industry ICS 79.060.99 B70 People's Republic of China forestry industry standards Replacing LY/T 1416-1999 Textile laminates Posted on.2013-10-17 2014-01-01 implementation State Forestry Administration released ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard is the LY/T 1416-1999 "textile wood laminate" amendment. This standard and the LY/T 1416-1999 version phase Than the main technical changes are as follows. --- Added "textile laminates" terms and definitions. --- Increased edge straightness, verticality, flatness tolerance. --- Modify the impact toughness and the grain shear strength of the provisions of the value. --- Remove the vertical warp tolerance and Appendix A ~ Appendix G. Please note that some of this document may be patentable. The issuing agencies of this document do not bear the responsibility of identifying these patents. This standard by the National Panel Standardization Technical Committee (SAC/TC198) and centralized. This standard was drafted. Northwest Agriculture and Forestry University, China Academy of Forestry Wood Industry Institute, Shanghai Institute of Timber Industry. The main drafters of this standard. Feng Dejun, paragraph new Fang, Zhao Jing Feng, Chang Juncheng, Han Zhenhua, Sun Jingrong, Tao Wei root, Zhao Li. This standard replaces the standards previously issued as follows. --- ZBB70004-1987; --- LY/T 1416-1999. Textile laminates1 ScopeThis standard specifies the terms and definitions of textile laminates, requirements, test methods, inspection rules, signs, packaging, transportation and storage Save and so on. This standard applies to the manufacture of textile pick bar, side panels, crane board, walking board and other products of wood laminates.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 2828.1 Sampling procedures for inspection - Part 1. Batch inspection sampling plan by acceptance quality limit (AQL) GB/T 17657 artificial board and decorative plywood physical and chemical properties of test methods GB/T 18259 Panels and decorative surface terminology Determination of GB/T 19367 plywood3 Terms and definitionsGB/T 18259 and defined by the following terms and definitions apply to this document. 3.1 To birch and similar properties of other tree species Rotary veneer, coated with phenolic resin adhesive, parallel to the grain by the parallel group of hot-formed textile With plate.4 requirements4.1 Size and its deviation 4.1.1 Specifications Dimensions and deviations should be consistent with the provisions of Table 1. Table 1 specification size and deviation in millimeters Specification size tolerance Length 700,750,780,800,830,850,870,900,960,1000 Width 500,750 thickness 18,20,22,24,26 37,55 ± 1.5 ± 2.0 Note. Other dimensions can be negotiated by both supply and demand production. 4.1.2 edge straightness tolerance of 1mm/m. ...... |
