LY/T 1373-2016 English PDFUS$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. LY/T 1373-2016: Optical projection centering and loading machine Status: Valid LY/T 1373: Historical versions
Basic dataStandard ID: LY/T 1373-2016 (LY/T1373-2016)Description (Translated English): Optical projection centering and loading machine Sector / Industry: Forestry Industry Standard (Recommended) Classification of Chinese Standard: B97 Word Count Estimation: 6,646 Date of Issue: 2016-07-27 Date of Implementation: 2016-12-01 Older Standard (superseded by this standard): LY/T 1373-1999 Regulation (derived from): State Forestry Administration Announcement No.17 of 2016; Industry Standard Announcement No.16 of 2016 (No.204) Issuing agency(ies): State Forestry Administration LY/T 1373-2016: Optical projection centering and loading machine---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.(Aura projection centering machine) ICS 79.120.99 B97 People's Republic of China Forestry Industry Standard Replacing LY/T 1373-1999 Halo projection centering machine Released on.2016-07-27 Implementation of.2016-12-01 State Forestry Administration released ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. Please note that some of the contents of this document may involve patents. Publication of this document The organization is not responsible for identifying these patents. This standard is a revision of LY/T 1373-1999 "Halo Projection Centering Machine". This standard is compared with LY/T 1373-1999. The main differences between the series of changes are as follows. --- Revised and added normative references; ---Modified the main parameters; --- Increased geometric accuracy and work accuracy test; --- Remove Appendix A. This standard is proposed and managed by the National Standardization Technical Committee for Wood-based Panel Machinery (SAC/TC66). This standard was drafted. Xinyang Wanhua Woodworking Machinery Complete Equipment Co., Ltd., Beijing Forestry Machinery Research Institute of the State Forestry Administration, Shandong 100 Shengyuan Group Co., Ltd. The main drafters of this standard. Hu Dedi, Han Hui, Li Xiaoxu, Song Xiucai. The previous versions of the standards replaced by this standard are. ---GB 6925-1986; ---ZBB97009-1986; ---LY/T 1373-1999. Halo projection centering machine1 ScopeThis standard specifies the main parameters, requirements, inspection rules and signs, packaging and storage of the halo projection centering machine. This standard is applicable to the halo projection centering machine (hereinafter referred to as the centering machine) in the log cutting process.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 191 packaging storage and transportation icon GB 5226.1 Mechanical electrical safety machinery and electrical equipment - Part 1. General technical conditions GB/T 13306 signage General technical conditions for GB/T 13384 mechanical and electrical product packaging General technical conditions for GB/T 18262 wood-based panel machinery GB/T 18514 wood-based panel machinery safety rules General technical requirements for welded parts of GB/T 23570 metal cutting machine tools General technical requirements for GB/T 23572 metal cutting machine hydraulic system JB/T 9953 Woodworking Machine Noise Acoustic (Pressure) Level Measurement Method3 sketchThe schematic diagram of the centering machine is shown in Figure 1. Description. 1---rack; 2---the driving mechanism; 3---card wooden arm guide; 4---卡木臂; 5---wayway rail; 6---halo projection device; 7---centering device; 8---wood segment. Note. This figure is not limited to the specific structure of the machine. Figure 1 Schematic diagram of a halo projection centering machine ...... |
