LY/T 1370-2018 English PDF

US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
LY/T 1370-2018: Long wood bucking
Status: Valid

LY/T 1370: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
LY/T 1370-2018	149	Add to Cart	2 days	Long wood bucking	Valid
LY/T 1370-2002	199	Add to Cart	2 days	Long wood bucking	Obsolete
LY/T 1370-1999	RFQ	ASK	3 days	(Bucking primitive streak)	Obsolete

Similar standards

LY/T 2407   GB/T 30762   LY/T 1650   LY/T 2794   LY/T 2899   LY/T 1788   

Basic data

Standard ID: LY/T 1370-2018 (LY/T1370-2018)
Description (Translated English): Long wood bucking
Sector / Industry: Forestry Industry Standard (Recommended)
Classification of Chinese Standard: B60
Classification of International Standard: 79.040
Word Count Estimation: 4,424
Date of Issue: 2018-02-27
Date of Implementation: 2018-06-01
Older Standard (superseded by this standard): LY/T 1370-2002
Quoted Standard: GB/T 144; GB/T 155; GB/T 15787
Regulation (derived from): State Forestry Administration Announcement No. 5 of 2018
Issuing agency(ies): State Forestry Administration
Summary: This standard specifies the terms and definitions and requirements for the original article. This standard is applicable to the design and construction of original strips in cutting areas, open fields and lumber yards.

LY/T 1370-2018: Long wood bucking

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Long wood bucking ICS 79.040 B60 People's Republic of China Forestry Industry Standard Replacing LY/T 1370-2002 Original article Published on.2018-02-27 2018-06-01 implementation State Forestry Administration released

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces LY/T 1370-2002 "Original Articles", compared with LY/T 1370-2002, the main changes are as follows. --- Added normative references; --- Added terms and definitions; --- Removed the requirements for the production of materials and materials, and the related content was integrated into the requirements; --- Increased the design method of the original strips requiring the original strips such as missing joints, sharp cuts, cores, tree packs, and ring cracks; --- Adjusted the design method of the different original strips. This standard is proposed and managed by the National Timber Standardization Technical Committee (SAC/TC41). This standard was drafted. Changbaishan Forest Industry Group Huangnihe Forestry Co., Ltd., Jilin Forestry Technician College, Dunhua City, Jilin Province Industry bureau. The main drafters of this standard. Huang Chunhui, Li Wenge, Pan Xiaoyi, Gao Bingjun, Sun Qingguo, Qu Gang, Sun Dan, Wang Hong, Tian Hongbo, Zhang Chenglong, Wang Juncheng, Yang Yongxi, Bie Yingbo, Li Wei, Yu Changyong. The previous versions of the standards replaced by this standard are. ---LY/T 1370-1999, LY/T 1370-2002. Original article

1 Scope

This standard specifies the terms and definitions and requirements for the original article. This standard applies to the design and construction of original strips in cutting areas, open fields and lumber yards.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 144 log inspection GB/T 155 log defect GB/T 15787 Log Inspection Terminology

3 Terms and definitions

The following terms and definitions as defined in GB/T 155 and GB/T 15787 apply to this document. 3.1 The process of sawing the original strip into logs by standard.

4 requirements

4.1 Material and material principle 4.1.1 The material is to be scientifically measured according to GB/T 144 and related log product standards and market demand. The measuring tape should be accurate and the marking should be obvious. And leave a proper kerf length. 4.1.2 The foundry shall cut the wire under the wire design plan and shall not change the sawing by itself. When the material is made, the distance between the long and short faces of the kerf is not More than the long-term tolerance of the logs, to prevent cracking and sawing the adjacent wood. 4.2 Measuring materials, methods of making materials 4.2.1 The normal original strip with straight trunk, small sharpness, few knots and no other defects should be designed according to market demand. High quality or long material. 4.2.2 Small diameter original strips, multi-section original strips, and tip woods shall be reasonably determined according to market demand. 4.2.3 Decaying the original strip, it should be inferior to stay in good condition, take the root and tip decay to cut off or design the short material, the middle of the method of decaying the pumping section. 4.2.4 The original section of the missing section is made on a piece of log or separately on two sections of logs. 4.2.5 The original strip of the knot shall be based on the standard of the log product, and the number of needles, broadleaf knots, size, joints, dead knots, etc. shall be On a piece of log, scattered on two sections of logs or on the section of the log, not in the tree bag, tree tumor, decay section and missing section Line material. 4.2.6 For longitudinal cracks and outer strips, the defects shall be designed on a section of logs or distributed on two sections of logs. Through cracking and bursting ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of LY/T 1370-2018_English be delivered?

Answer: Upon your order, we will start to translate LY/T 1370-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of LY/T 1370-2018_English with my colleagues?

Answer: Yes. The purchased PDF of LY/T 1370-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version LY/T 1370-2018?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version LY/T 1370-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.